FLEXSTEEL™ Flap Discs are made of self-sharpening abrasive grains.
Flap Discs

FLEXSTEEL™ Flap Discs are made of self-sharpening abrasive grains.

Used for blending sharp corners, heavy blending in fillet welds, FLEXSTEEL™ Flap Discs feature specially designed zirconia alumina abrasive grain blend. Units come with Walter’s unique Eco-Trim backing for extended disc life. Designed for use on steel in industrial, metal fabrication and construction applications, discs can withstand lateral pressure for removing material from corners and...

Read More »
Polifan® Z SG-Power Flap Discs can deal with high contact pressure.
Flap Discs

Polifan® Z SG-Power Flap Discs can deal with high contact pressure.

Used on stainless steel and steel, Polifan® SG-POWER Flap Discs are available in conical shape with 4 1/2, 5 and 7-in. diameters in either 5/8-11 threaded or 7/8 in. plain arbor holes. Designed in 40 and 60 grit sizes, discs are suitable for working on weld seams, chamfering and surface grinding steel. Device delivers optimum stock removal on high-powered angle grinders at higher contact...

Read More »
Plantex Ceramic Flap Discs feature abrasive structure.
Flap Discs

Plantex Ceramic Flap Discs feature abrasive structure.

Available in 4-1/2" and 5" diameters and in grits of 40, 60 and 80, Plantex Ceramic Flap Discs feature backing plate made of polypropylene binder. Delivering speeds of 5000 to 8000 rpm, unit’s hemp fiber provides high insulating, vibration damping and noise-reducing properties. Suitable for grinding all metals including stainless steel, steel, aluminum, titanium, bronze, flap discs...

Read More »
Flap Discs

Red Heat R983 Abrasive Belts and Discs contain no performance-inhibiting dies.

Wear resistant, Norton Red Heat R983 suite of products comes with enhanced grain/bond adhesion. Designed for grinding and polishing metals, R983 Flap Discs are available in three shapes and in sizes ranging from 4" x 5/8" up to 7" x 7/8". R983 Discs are available in TS (Type II) and TR (Type II) in sizes ranging from 1-1/2" to 3". R983 Belts come in lengths ranging from 11" to 700," stand widths...

Read More »
Tiger Angled Flap Discs come with self-sharpening zirconium flap disc.
Flap Discs

Tiger Angled Flap Discs come with self-sharpening zirconium flap disc.

Available in 7/8-inch arbor or 5/8-inch -11 nut for fast change-over, Tiger Angled Flap Discs features 90° angled flap design which allows operator to grind at higher or lower angle. Featured with phenolic blocking, units reduce the risk of gouging of workpiece while grinding fillet welds for smoother finish. Suitable for grinding steel, stainless steel, aluminum and other hard-to-grind metals,...

Read More »
Weiler to Introduce New Product Offerings at FABTECH 2016
Applicator / Finishing / Cleaning Brushes

Weiler to Introduce New Product Offerings at FABTECH 2016

Attendees of FABTECH can explore a variety of product offerings and product line upgrades at booth N3704 CRESCO, Pa. — Weiler Abrasives Group, a leading provider of abrasives, power brushes, and maintenance products for surface conditioning announced it will attend FABTECH 2016 in Las Vegas, November 16 to 18 at booth N3704 at the Las Vegas Convention Center. The company will showcase a variety...

Read More »
Flap Discs grind and blend carbon and stainless steel.
Abrasive Coated Discs

Flap Discs grind and blend carbon and stainless steel.

Featuring self-sharpening Zirconia Alumina grain, Wolverine® Abrasive Flap Discs deliver aggressive grinding from start to finish. Discs come in both Type 27 and Type 29 styles, allowing for optimal angle of approach and finish. For fast changeover, flap discs are available with quick-change 5/8 in. – 11 nut, in addition to 5/8 and 7/8 in. arbors and variety of diameters to fit all tool...

Read More »
Blending Disc eases finishing in hard-to-reach areas.
Abrasive Coated Discs

Blending Disc eases finishing in hard-to-reach areas.

Constructed using heat-resistant non-woven matrix, Blendex U™ Turbo provides consistent finish without smearing. Self-sharpening grains allow for high material removal on many different surfaces, including steel, stainless steel, and aluminum alloys. Using Blendex™ Unitized Technology, disc was designed specifically to blend fillet welds as well as deburr sharp edges commonly found across...

Read More »
PFERD Inc to Feature Metal Finishing Solutions at Fabtech 2016
Cutting Wheels

PFERD Inc to Feature Metal Finishing Solutions at Fabtech 2016

Milwaukee, WI— PFERD INC., a global manufacturer and distributor of abrasives, brushes and power tools, will highlight its precision products and power tools as well as its PFERDVALUE® program in booth N2004 at FABTECH 2016, November 16-18, 2016, at the Las Vegas Convention Center.Â-  The company will present featured products from its comprehensive line of metal cutting and...

Read More »
Abrasive Discs cut titanium and brass.
Abrasive Coated Discs

Abrasive Discs cut titanium and brass.

Designed with silicon-carbide based formulation, Zip Titan™ and Chopcut Titan™ help prevent materials being cut from overheating. Keeping metal cooler helps preserve mechanical properties and surface integrity of titanium and brass. Both discs offer extended lifetime as well as faster and freer cuts. Chopcut Titan™ is designed specifically for performance cutting on portable chop saws.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers