DC-DC Converters suit critical railway applications.
Featuring quarter-brick, 2.28 x 1.45 x 0.50 in. footprint, MTQZ50 Series includes single output models offering 5, 12, 15, and 24 Vdc outputs with input voltages of 72 or 110 Vdc. Units deliver up to 50 W of power with efficiency up to 92% and operating temperature of -40 to +85Ã-
Read More »Power Converters are designed for military applications.
Available for AC/DC or DC/DC applications, Pi2 Converter features topology that has minimized component count and does not follow Nyquist stability criteria. Converter frequency is quasi-fixed and can interleaveÃ- 2 or more converters for higher power and to reduce primary side filtering. Along with other features that include cycle by cycle regulation and short circuit protection, these...
Read More »Isolated DC-DC Converters suit battery-powered applications.
Rated at 3 W, PQMC3-S Series is available with input ranges of 4.5~9, 9~18, 18~36, or 36~75 Vdc while PQM3-M Series offers input ranges of 9~18, 18~36, or 36~75 Vdc. Both families come in single output voltages of 5, 12, or 15 Vdc, and PQMC3-S also provides dual output voltages of Ã-
Read More »Isolated, Encapsulated DC/DC Converters suit harsh environments.
Offering efficiency ratings of 88%, SPM series comprises 5-sided shielded converters that measure 25.4 x 25.4 x 10.41 mm and incorporate PWM technologies and synchronous rectification techniques. SPM15 series is designed for applications that require Vin ranges of 9–36 V or 18–75 V @ 15 W, while SPM25 series covers applications requiring Vin from 36–75 V @ 25 W. Both series provide single...
Read More »The Definitive Guide to High-Capacity Autonomous Mobile Robots
This white paper is a complete guide to understanding autonomous mobile robots and their crucial role in various types of material handling applications.
Read More »Switching Controller delivers 1% output accuracy.
Supporting point-of-load supplies up to 35 A, XRP6141 Synchronous Step Down Controller achieves optimized transient response and output accuracy using emulated current mode Constant On-Time control loop. Device is specified with input voltage range of 4.5–22 V and delivers output voltage from 0.6–18 V. Housed in 16-pin, 3 x 3 QFN package, RoHS-compliant controller delivers core voltage rails...
Read More »DC/DC Converters meet MIL-STD-461 D, E, and F.
With built-in EMI filter, 5 W Series 3090 enables compliance with EMC requirements for aerospace, defense, and civil aviation airborne electronics. Units operate from nominal 28 Vdc power sources and are available with single or dual outputs. Packaged in hermetic case measuring 1.08 x 1.08 x 0.380 in., converters are robust enough to operate through MIL-STD-704A 80 V/100 mS power line transients.
Read More »DC-DC Converter Module suits FPGA and embedded applications.
Consisting of non-isolated buck converter without PWM controller, Power Block OKLP-X/35-W12-C measures 25.4 x 12.7 x 11.1 mm and has typ efficiency rating of 94%. Input voltage is 12 Vdc nominal and can accommodate range of 7–13.2 Vdc. Single package solution incorporates all power handling components, fully tested and characterized for thermal and dynamic performance. When coupled with ZMDI's...
Read More »DC-DC Converter IC optimizes efficiency at light load.
With max current of 3 A, Model LV5980MC regulates input voltages from 4.5–23 V down to output voltage as low as 1.235 V. Device operates at 63 Ã-µA, with both pulse-width modulation and pulse-frequency modulation, and can achieve 80% efficiency at output current of 2 mA in typical applications. Step-down converter includes internally fixed switching frequency of 370 KHz and 100 mΩ...
Read More »DC-DC Converters suit micro-cell transmitter applications.
Packaged as open-frame quarter brick modules with through-hole mounting, 150 W PAQ Series has 2:1 input range of 36–75 Vdc around nominal 48 Vdc input. Single 29.8 Vdc nominal output can be trimmed from 23.83 to 32.78 Vdc to accommodate application's specific voltage requirements. Providing up to 92.5% efficiency, converters can deliver up to 5 A output current from fully regulated output....
Read More »Medical-Grade DC/DC Converters offer single/dual outputs.
Supplied in 2 x 1 in. shielded metal package,Ã- MKW10M Series suits space-constricted applications in industrial and medical instrumentation. This 10 W, medical-grade converter with reinforced 4,200 Vac I/O-isolation is approved to UL/CSA/EN/IEC60601-1 3rd Edition standards and is 2xMOOP rated. Along with 2:1 input ranges of 12, 24, and 48 Vdc, features include regulated single/dual outputs...
Read More »Error Proofing by Design
Sturtevant Richmont's torque tools help customers cut rework and warranty costs while increasing throughput.
Read More »