Point-of-Load DC-DC Converter suits space environments.
Characterized to 100 krad total dose radiation, SVGA Series point-of-load DC-DC converter steps down voltage at point of use in distributed power system. Regulated, nonisolated converter operates at frequency of 250 kHz, offers power density of >100 W/in.3, and provides up to 94% efficiency. Output power is up to 10 A or 33 W and product also features short circuit protection. It is packaged in...
Read More »DC/DC Converters come in miniature SMT packages.
Along with industry standard pin out, ISF and ISG (1 W) models and larger ISL model (1.5 W) feature input to output isolation of at least 1 kV. Available in 2 variants that provide for +5 or +12 Vdc inputs, ISG family provides single regulated output covering nominal voltages of +5, +12, or +15 Vdc. Both ISF and ISL models come in single and dual output versions covering nominal voltages from...
Read More »Synchronous Buck Controllers suit rail or POL generation.
Models ADP1870 and ADP1871 incorporate constant on-time and valley current-mode techniques to drive all N-channel power stages, regulating output voltages as low as 0.6 V with Ã-
Read More »DC/DC Converters enhance portable electronics applications.
Supplied in 8-pin, 2 x 2 x 0.75 mm SON package, TPS62065/TPS62067 synchronous step-down converters support 2.7-6 V input and can manage up to to 2 A. Products provide up to 95% power efficiency while helping to reduce board space and extend battery life in portable electronics applications. In addition to 3 MHz fixed frequency operation, features include 18 Ã-µA quiescent current, Power Save...
Read More »Nylon Washers for Your Automotive Applications
This ebook provides an overview of nylon washers in the automotive industry.
Read More »DC-DC Switching Regulators feature internal compensation.
Offered in 3 x 3 mm TSOP packages, 700 kHz ADP2300 and 1.4 MHz ADP2301 integrate high-side MOSFET that delivers power conversion efficiencies greater than 90%. Step-down non-synchronous regulators include soft-start circuitry and bootstrap diodes for intermediate bus generation and point-of-load regulation. Supporting input voltage of 3-20 V, ICs provide adjustable output from 0.8 V to 90% of...
Read More »DC/DC Converters deliver 15 W from 1 sq in. of board area.
Providing efficiency levels up to 86%, BEI15 Series offers choice of Ã-
Read More »Synchronous Buck Switching Regulator comes in 4 x 4 mm package.
Supplied as compact multi-chip module (MCM) with built-in power functionality, NX9415(TM) is designed for step-down DC/DC converter applications. It converts 8-22 V input down to as low as 0.8 V with output current of up to 5 A. In addition to 2 MHz controller and 2 MOSFETs with 31 mW RDS(on), product features internal 5 V regulator that provides voltage supply to internal logic and driver...
Read More »Sixteenth-Brick DC/DC Converter Combines High Power and Efficiency for Space-Constrained Designs
ULS Series: The ULS is a new range of isolated DC/DC converters that provide up to 66 Watts of output power and full 2250VDC isolation from a 'sixteenth-brick' package. The DOSA compliant ULS series represents the latest in small footprint DC/DC converter design and provides an ideal space-saving solution for high current designs in telecom and datacom applications. o Up to 66W output power from...
Read More »DC/DC Converters deliver 15 W of power from 1 sq in. of area.
Designed for high current applications and for powering digital systems, BEI15 series of isolated, wide input bipolar DC/DC converters have input voltage range between 9-36 V and 18-75 V with positive or negative on/off polarity. Features included are 2,250 Vdc basic isolation, and self protection. Units are space-saving pin compatible, drop-in replacement for 1 x 2 in. DC/DC converters.
Read More »Military Grade Power Converters are offered in AC-DC/DC-DC models.
With ability to provide 28 Vdc output with power ratings from 1,200-1,800 W, Raptor series of power converters are suited for harsh military applications such as shelters, armored vehicles, avionics, and naval. Single and 3-phase input ranges from 88-265 Vac or 125-400 Vdc. Series meet MIL-STD-810D for operating temperature conditions, vibration, and shock, and also MIL-STD ratings for EMI, navy...
Read More »DoorKing's 1601 Lane Barrier Provides a Higher Level of Traffic Control for Less
DoorKing is proud to introduce an easy add-on to its 1601 Barrier Gate Operator: The 1601 Traffic Lane Barrier. The barrier gate provides greater traffic control while eliminating the need for bollards or crash beams. Check out this video to learn more.
Read More »