SMT 3-20 A PoL Converters have fully optimized control loops.
Compliant with 2nd Generation DOSA standards, DOSA-2 non-isolated DC/DC converters do not require any external tuning components and feature edge plated castellation pads that facilitate SMT solder joint inspections. There are 4 series - iCF, iCG, iBF, and iAF - with respective output current/power ratings of 3 A/16.5 W, 6 A/33 W, 12 A/66 W, and 20 A/110 W. All operate with 4.5-14 V input and...
Read More »
DC/DC Converters meet rail and industrial standards.
Providing 500 W of power in chassis mount package, PRC-500 Series includes versions that meet industrial EN60950 or rail EN50155 standards. Units feature standard nominal input voltages of 24, 48, 72, and 100 Vdc and provide conversion to adjustable 24 Vdc and 48 Vdc outputs that are regulated to 0.2% or better. ORing FET option allows parallel operation of multiple units. Measuring 10.47 x 7.08...
Read More »
Programmable Buck Regulator ICs deliver high-efficiency power.
Dual-/single-output integrated DC-DC buck regulators SMB206A and SMB210A have serial digital interface and on-board non-volatile memory that enables configuration during development and re-programming in system by host software. ICs can also be programmed by fixed resistors and are available as standard products with fixed voltages. Respectively, SMB206A and SMB210A supply up dual 3 A + 3 A or...
Read More »
DC/DC Switching Regulators offer efficiency rates up to 96%.
Model AMSRW-78Z has up to 8:1 input voltage range spanning from 9-72 Vdc and steps down to output voltages from 3.3-15 Vdc. Featuring up to 6:1 input voltage range from 4.5-30 Vdc, AMSRB-78-NZ also steps down to regulated outputs ranging from 3.3-15 Vdc and offers output ripple and noise of 25 mV p-p. Both products operate in ambient temperature range of -40Ã-
Read More »
WHAT TO LOOK FOR IN AN OPTICAL PARTNER
This white paper provides an overview into what to look for in an optical partner.
Read More »
DC-DC Converter is housed in 5-sided shielded metal enclosure.
Designed for applications requiring input to output isolation, 10 Watt EW Single Output Series DC-DC converters are available with input ranges from 9-18, 18-36, and 36-75 Vdc. Output options are 2.5, 3.3, 5, 12, and 15 Vdc, and all have input to output isolation of 1,500 Vdc. Fully encapsulated for improved thermal performance, case size measures 1.25 x 0.80 x 0.4 in. Operating temperature range...
Read More »
Ericsson Scoops 2nd 'Product of the Year' Award from Electronic Products China Magazine
o PKM5000D DC/DC converter selected from hundreds of entries o Radio base station equipment design simplified o Single product powers systems from 18V to 75V, reducing inventory while increasing flexibility and reducing cost o Versatile - also suitable for industrial and transportation applications Ericsson Power Modules' PKM5000D was launched in June 2010 as a flexible, 4:1 input voltage DC/DC...
Read More »
DC/DC Backlight LED Driver powers up to 6 strings in LCDs.
Featuring 6 outputs individually capable of providing up to 50 mA of constant current, each device in second generation ALD6 series can drive 1-, 2-, 3-, or 6-string configurations of LEDs connected in series/parallel for backlighting LCDs. Dimming controls with resistive, analog, or PWM inputs provide smooth LED brightness transitions. Available in DIP or SMD packages that measure 23 x 21 mm,...
Read More »
DC/DC Bus Converter serves distributed power applications.
Supplied in quarter brick open frame package, RBC-12/17-D48 produces up to 210 W output power, accepts 36-75 V input, delivers 92.5% efficiency at full load, and offers Ã-
Read More »
Rack-Mount DC-DC Power Supply suits rugged vehicle applications.
Model TVR3001, 3,000 W DC-DC power conversion rack features 3 modules, each with two F501 full brick DC-DC converters, coupled with 2-phase boost converter, to provide standalone power solution. Modules plug into 19 in., 2U rack which can be used in 19 in. cabinet of various heights. Operating in temperatures from -25 to +60Ã-ºC, product offers step-up or step-down power conversion and has...
Read More »Bulk Front End 1,200 W Power Supply is digitally programmable.
Accommodating power demands of networking equipment, PMBus-compliant DS1200DC-3 meets needs of systems co-located with telecom and central office applications operating from 48 V battery plants. Hot-pluggable, rack-mount module, programmable via IÃ-²C interface, has 1U x 2U form factor, -40 to -72 Vdc input, and main +12 Vdc output that continuously delivers up to 100 A. Auxiliary, always-on...
Read More »
Precision Machining Solutions with Over 25 Years of Experience
Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.
Read More »
