8W Isolated / Regulated DC‐DC Converters are RoHS compliant.
Housed in 16 pin DIP package, MDWI08 Series 8W Isolated / Regulated DC‐DC Converters feature I/O isolation of 1500 VDC, shielded metal package and built‐in EMI filter. Measuring 0.94 x 0.54 x 0.31 in. dimensions, units are operated from ‐40 °C to +80 °C temperature range. Offering 9‐36 or 18‐75 VDC input ranges, products are available in single output of 3.3–24 VDC and dual output...
Read More »
DC-DC Converters feature 2250 VDC of isolation.
Housed in quarter-brick package, QB Series DC-DC Converters deliver up to 150 watts of power. Offering Input Under-Voltage Lock-Out and 9-36 V or 18-75 V of input range, units are operated in temperature range of -40 °C to +105 °C. Featuring positive or negative on/off control function, product comes with over current and continuous short circuit protection. Providing low no-load power...
Read More »
VXR Series DC-DC Converters come with configurable outputs.
Available with single and dual output models from 7 W to 100 W and 2 to 20 A EMI filters, VXR Series DC-DC Converters meet MIL-STD-1275 (100 V surge) and DO-160 standards. Featuring two independently controlled and isolated outputs, units are housed in V-SHIELD® epoxy encapsulated, EMI shielded package that is resistant to chemical, solvent and salt environments. Converters are compatible with...
Read More »
UL Approval on the 500 Watt MXW and 360 Watt MTW series of Half Bricks
Calex Mfg. Co., Inc. of Concord California announces the addition of UL certification to the 500W MXW, and the 360W MTW series. Both the MXW and MTW series are recognized by Underwriters Laboratory as meeting the requirements of UL 60950-1. The MXW and MTW feature an ultra-wide 9-36VDC input range accommodating a variety of power sources from 12V to 24V to 28V nominal. Output voltages available...
Read More »
Heated Deck Panels
Heated Deck Panels: The playbook to how these snow-free walkways work for bridges, sidewalks, and platforms
Read More »
DC-DC Converters feature 1500 Vdc input/output isolation.
Featuring 4:1 inputs, remote on/off, overload voltage and short-circuit protection, ATA Series DC-DC Converters are available in 14 variants in two categories with 9 - 36 V and 18 - 75 V inputs. Offering 3.3, 5, 12, 15 and 24 V single output voltages and dual output voltages with ±12 V or ±15 V, units are housed in 24 x 13.7 mm metal case with height of 8 mm. Eliminating the need for external...
Read More »
Full Brick DC/DC Converters offer 0.1% line and load regulation.
Available in 24S48.21FXW (48V) and 24S53.19FXW (53V) models with peak to peak output ripple and noise is 150mV and 140mV respectively, Full Brick DC/DC Converters feature 1500VDC input to output isolation. Operating in -40 to +105°C temperature range and at 200 kHz frequency, units are housed in 2.5 x 4.7 x 0.52 in. H package. 24S48.21FXW model offers up to 21 A of output current whereas...
Read More »
BD9227F DC/DC Converter features internal frequency control.
Integrating high-side PMOS, BD9227F DC/DC Converter is housed in 5.00mm x 6.20mm x 1.71mm SOP8 package. Operating in -40°C to 85°C temperature range with 6V to 20V voltage supply, unit’s linear output voltage control ensures accurate controlling of motor rotational speed. Used in cold air circulation applications, converter provides 1.0MHz switching frequency and 1A of output current. Unit...
Read More »
DPZ Series of DC/DC Converters are housed in UL94V-0 rated plastic case.
Offering 4:1 input range with nominal input voltages of 24VDC and 48VDC, DPZ Series of DC/DC Converters deliver up to 6 W fully regulated output power. Providing 3.3, 5, 12, 15, and 24 VDC single outputs and ±5, ±12 and ±15VDC dual outputs, units feature 3000VDC DC isolation. Operated in -40 to +85°C temperature range, converters come in DIP footprint and are RoHS compliant.
Read More »
CPP Series DC-DC Converter features rugged screw terminals.
Available with output power ranging from 10 to 100 watts, CPP Series DC-DC Converter offers 2:1 or ultra-wide 4:1 input voltage range. Featuring four optional threaded inserts for mounting, units come in low profile chassis mount package. Unit's middle terminal can be specified as Output Trim or Enable option.
Read More »
ITZ Series DC-DC Converters feature remote on/off function.
Available with +3.3, +5, +9, +12, +15, or +24 VDC single output or ±5, ±12 or ±15 VDC dual output model, ITZ Series DC-DC Converters are rated to 1.5k VDC input to output isolation. Operated in –40 to +85°C temperature, units come with +9 to +36 VDC or +18 to +75 VDC of input range options. Meeting EN55032 level A standards, converters are housed in 21.9 x 11.2 x 9.6 mm SIP-8 package and...
Read More »
Custom Fabrication & Machining Services with Over 30 Years of Experience
As a trusted manufacturer to customers across a broad range of industries, Key Gas Components is a premier provider of CNC machining and tube fabrication. Our entire organization is quality driven and customer-centric, with broad-based manufacturing capabilities that can accommodate the most challenging requirements. See our video to learn more.
Read More »
