Multi-Axis Laser System offers 2D and 3D cutting.

Multi-Axis Laser System offers 2D and 3D cutting.

Available with 2,500, 3,000, or 4,000 W CO2 laser resonator, DOMINO cuts flat or shaped parts and performs bevel cutting. Cantilever designed 5-axis system has X-Y-Z working capacity of 120 x 60 x 15 in. Laser head also does 2 rotations: 360Â-

Read More »

Plasma Arc Cutter uses compressed air for fuel.

Air Force(TM) 625 cuts Â-½ in. steel at 10 ipm using hand-held torch. It severs steel up to 7/8 in. thick and slices through thinner materials such as Â-¼ in. steel at more than 60 ipm. Wind Tunnel TechnologyÂ-® helps prevent abrasive dust and metal particles from damaging internal components. When paired with engine drive, Air Force 625 draws about 30 primary A on 230 Vac line. Since...

Read More »
Water Jet Pump converts to various operating pressures.

Water Jet Pump converts to various operating pressures.

Series NLB 331 consists of plunger pump with hard-coated valves and plungers. Quick-change fluid end lets user choose any of 5 pressures from 8,000-20,000 psi. Flows range from 24-58 gpm. Utilizing 330 hp diesel engine, mobile pump unit is suited for range of product removal and surface preparation jobs.

Read More »
End Prep Tool prevents out-of-round bevels.

End Prep Tool prevents out-of-round bevels.

Portable, air-powered MILLHOGÂ-® Dictator Clamping Tool features centering cage, mounting sleeve for tool, and dial indicator for establishing actual center of pipe up to 24 in. OD. Capable of compound bevels without adjustments, preset template allows ratchet cross-feed mechanism to engage single point cutting blade. Tool uses cutter blades made from TiN coated, high-speed tool steel and...

Read More »
Cut/Strip/Wrap Bit and Holder suits telecom industry.

Cut/Strip/Wrap Bit and Holder suits telecom industry.

Cut/Strip/Wrap (CSW) bit and holder consists of open-faced tool that cuts, strips, and wraps wire in one operation. Able to wrap wire directly from reel or harness, product is designed for applications wrapping 24 and 26 AWG wire; 30 AWG capacity is available upon request.

Read More »
Automatic Wire/Tubing Cutters cut up to 8,000 pieces/hr.

Automatic Wire/Tubing Cutters cut up to 8,000 pieces/hr.

Able to cut flexible tubing up to Â-½ in. OD into lengths as small as 0.100 in., WC601 Series cutters offer batching and kitting capabilities that allow for multiple cut lengths and quantities within one batch. Products have 9 programmable feed rates and use self-centering belt feed to provide cut length accuracy without crushing material. Cutting system consistently produces square cuts on...

Read More »

Rotary Pipe Cutter generates minimal heat.

Model SA-90 cuts tubes and pipe with max OD of 3.55 in. and max wall of 1.18 in. Holding collets virtually eliminate distortion, even on thin walled tubing. Cutter provides fully automatic operation, including loading, auto trim cut, production cutting, and unloading. Cutter head revolves around circumference of pipe or tube while cutters close toward center. Model SA-90 is suited for steel,...

Read More »

Laser Cutting machine cuts formed and 3D parts.

TLC CUT 5 consists of one 5-axis laser machine with flying optic design and 120 x 60 x 24 in. work envelope. Precision laser cell comes equipped with AutoLas plusÂ-® for automatic focus adjustment and TLF CO2 laser, which is available in 2,000, 2,700, or 3,200 W power levels. Unit employs continuously-rotating C axis, B axis with Â-

Read More »
Hard Wire Cutter produces square cuts.

Hard Wire Cutter produces square cuts.

Suited for assembly and maintenance technicians, Xuron 2193F Hard Wire Shear features self-adjusting clamping fixtures that hold wire perpendicular to jaws. Full by-pass shearing action produces square cuts on both ends of hardened and tempered wire. Capable of cutting 0.064 in. (14 AWG) music wire, unit is ergonomically constructed with Xuro-Rubber(TM) hand grips and low-impact return spring.

Read More »
Die Cutter has remote touchscreen.

Die Cutter has remote touchscreen.

UltraPress can perform die-cutting tasks such as thermal die-cut, emboss, hot and cold steel-rule thru cut, and steel-rule kiss cut, all in one unit. Offered with optional Allen-Bradley PLC control capability and remote touchscreen, product can be Automation Engineered to communicate with other equipment in facility. Available in sizes 20 x 28 to 60 x 148 in., free standing unit may be used...

Read More »

All Topics