Curing Systems

LED Spot-Curing System features multi-head design.

LED Spot-Curing System features multi-head design.

Activated by foot pedal or PLC interface, BlueWave-® QX4™ comprises controller and up to 4 LED heads, which are available in 365, 385, and 405 nm and can be outfitted with 3, 5, or 8 mm diameter focusing lenses. LED heads and lenses can be used in any combination and can be controlled through variable mode feature that allows each head to be individually programmed for intensity and cycle...

Read More »
Explosionproof UV LED Fixture is approved for paint spray booths.

Explosionproof UV LED Fixture is approved for paint spray booths.

As alternative to traditional luminaires with UV cutoff filters, EPL-HB-100LED-RT-UVA does not require special coatings or produce unused, wasted light. Fixture provides 35,000 mW of 365 nm UV light output, and lifespan is 50,000 hr with 80% intensity retention. Operating from 120–277 V, unit is ETL-approved for use in wet environments and can be used for paint and adhesive curing, food...

Read More »
LED UV Lab Unit targets ink manufacturers.

LED UV Lab Unit targets ink manufacturers.

With max curing power of 18 W/cm-² and speeds up to 100 m/min, Magic Carpet System facilitates task of developing and testing new UV LED ink formulations. Sample tray, driven by linear actuator, is passed under UV array in precise, controlled, and repeatable manner. UV output and sample tray speed can be separately adjusted by set increments as required. Height adjustable from 5-25 mm, system...

Read More »
UV LED Curing Systems produce consistent and reliable results.

UV LED Curing Systems produce consistent and reliable results.

Engineered for- optical uniformity and process control, OmniCure-® AC8 Series includes air-cooled systems for curing inks, adhesives, and coatings in medical, industrial, and electronics manufacturing applications. Scalability allows for adjoining of multiple LED heads in order to achieve larger curing areas, supporting customization and flexibility without compromising output uniformity....

Read More »
Controller and Optical Adapter complement UV LED systems.

Controller and Optical Adapter complement UV LED systems.

When connected to OmniCure AC Series UV LED head, OmniCure PLC2000 enables integration with system to intelligently manage, monitor, and control curing solution. Unit can dynamically adjust output intensity, exposure time, and on/off capabilities while providing system information and error monitoring. Used with OmniCure AC4 and AC7 Series UV LED systems, AC Optical Adaptor creates evenly...

Read More »
LED Flood System accelerates curing process.

LED Flood System accelerates curing process.

Along with 5 x 5 in.- active area, BlueWave-® LED Flood System is available with- 365, 385, and 405 nm irradiator heads to optimize curing process between light-curable material and curing system. Intensity and uniformity contribute to accelerated and repeatable cure times, while instant on/off capability eliminates mechanical shutter components and- warm-up time requirements. CE-certified...

Read More »

LED Curing Lamps provide up to 20 W/cm² UV output.

Offering 12, 16, and 20 W/cm-² peak irradiance, FirePower™ Series provides advanced capability for applications in flexographic and wide-format digital printing. Environmentally friendly, water-cooled units feature 4 curing length options of 150 x 20 mm, 225 x 20 mm, 300 x 20 mm, and 350 x 20 mm.

Read More »

UV LED Systems target pinning and curing applications.

Available in wavelengths of 365, 385, 395, and 405 nm, FireEdge™ FE300 Systems are intended for high-power pinning and full-curing of adhesives, coatings, and inks. Scaling feature allows air-cooled units to be stacked end-to-end with contiguous, uniform UV output. Various optical features can be ordered to shape UV light for edge curing/banding while exhaust air is directed away from substrate...

Read More »

UV Light Curing Systems come in 365 and 395 nm wavelengths.

Featuring air-cooled design and customized optics, OmniCure-® AC4 and AC7 UV LED Light Curing Systems provide low temperature curing of adhesives and coatings. Manufacturers can maintain high irradiance at custom working distances based on specific UV process needs. Typical applications include fiber coating, camera module assembly, film lamination, hearing aid assembly, and lens bonding, as...

Read More »
Sentry Equipment Introduces New Compact Hygienic Automatic Sampler
Sponsored

Sentry Equipment Introduces New Compact Hygienic Automatic Sampler

As a leader in industrial sampling equipment at Sentry Equipment, our success is built on a history of innovation and designs that epitomize value and efficiency. The new Hygienic Automatic Sampler is another example of our dedication to developing quality engineered products. To learn how this product can streamline the sampling process for dry, free-flowing materials, see our new video.

Read More »

All Topics