Curing Systems

Explosionproof UV LED Fixture is approved for paint spray booths.

Explosionproof UV LED Fixture is approved for paint spray booths.

As alternative to traditional luminaires with UV cutoff filters, EPL-HB-100LED-RT-UVA does not require special coatings or produce unused, wasted light. Fixture provides 35,000 mW of 365 nm UV light output, and lifespan is 50,000 hr with 80% intensity retention. Operating from 120–277 V, unit is ETL-approved for use in wet environments and can be used for paint and adhesive curing, food...

Read More »

Gestamp Wind Steel Chooses IDPSA to Robotize the Processes for Applying Coatings on Turbine Tower Sections in Its Production Plants

Thanks to this framework agreement, the manufacturer of wind turbine towers will achieve an increase and optimization of production at its plants through the automation using robots for the processes of application and curing of coatings for wind turbine tower sections. Madrid, Spain - Gestamp Wind Steel, a division of Gonvarri Steel Industries (Gestamp Corporation) chose IDPSA to robotize its...

Read More »
Horizontal Conveyorized IR Oven is used for preheating, curing.

Horizontal Conveyorized IR Oven is used for preheating, curing.

Featuring electric IR or gas catalytic IR heaters and controls, Horizontal Conveyorized Infrared Preheat and Curing Systems are designed for preheating or curing liquid and powder coatings on range of products processed horizontally. Complete insulated oven enclosure offersÂ- options for side and bottom heat as well as room for integral supply or recirculated air plenums. System can be used...

Read More »
Seika Machinery to Highlight All New Machines at SMTA Indiana Expo & Trade Forum 2012

Seika Machinery to Highlight All New Machines at SMTA Indiana Expo & Trade Forum 2012

TORRANCE, CA - Seika Machinery, Inc., a leading provider of advanced machinery, materials and engineering services, will highlight its new, innovative products at the upcoming SMTA Indiana Expo & Trade Forum, scheduled to take place Tuesday, March 20, 2012 from 10 a.m. - 3 p.m. at the Ritz Charles in Carmel, IN. Seika's Solder Paste Recycling Unit enables approximately 90 percent of waste solder...

Read More »
3D UV Curing System can be customized to suit application.

3D UV Curing System can be customized to suit application.

Able to dry coatings in minutes, Ecocure light oven can be customized to meet end-user demands concerning number of lamps required to cure customer's part. Electronic timer-controlled unit - available in 120 V version on wheels for portability or 220 V, single-phase model - has filtered air cooling system and part rotator. Offering one-button operation, system is not dependent upon computer and...

Read More »

Air-Cooled LED Curing Lamp has compact, 185 cm-³ design.

Air-cooled RX FireFly 2W is suited for small format printing and adhesive industry segments requiring rapid curing of heat-sensitive substrates. Curing power is provided by 2 W/cmÂ-² UV irradiance and lamp offers spot curing capability with 25 x 10 mm emitting window. Unit can be set up using single connector for both data and power cables.

Read More »

Fusion UV Systems to Feature New UV Applications at RadTech 2010 Conference in Baltimore

GAITHERSBURG, MD, April 12, 2010 - Fusion UV Systems, Inc. announced today that it would feature new and potential applications of its leading UV curing technology. This is a departure from earlier RadTech conferences in which it had been demonstrating UV curing equipment to current and potential customers. The shift in emphasis reflects not only the growing interest in how UV curing can solve...

Read More »
UV Light Curing Conveyors handle large parts.

UV Light Curing Conveyors handle large parts.

Available with 18 or 25 in. wide UV curing lamps, WIDECURE(TM) conveyors can be outfitted with longwave or shortwave bulb. Lamp height can be adjusted to accept parts from 5-12 in. high, and tightly controlled line speeds are adjustable in 0.1 fpm increments from 1-50 fpm; faster conveyors are also available. Integral shielding eliminates stray UV light that might otherwise reach operator. Uses...

Read More »

UV Chamber uniformly cures small parts and assemblies.

Chamber comes with top mounts for exposing sample to optimum light in out-of-focus position. Designed for use with PowerCure 3, Model DRE-3, made of see-thru acrylic, has exposure shelves that can raise samples 2 to 6 in. from bottom. DRE6-110 is built for PowerCure 3 and all 6 in. lamp modules. Made of metal, it is available with adjustable sample stage. DRE6/10-10 is for use with 6 and 10 in....

Read More »

UV Curing System operates in power class of 500 watts/in.

Six inch Light Hammer 6 consists of 2 modular components: microwave-irradiator and solid-state power supply. Electrode-less bulb, mounted in elliptical reflector, focuses intense strip of light 2.1 in. below surface of lamp. System repeatedly cycles from high power to very low power over a few seconds. Power output from 25 to 100 percent is controlled from front panel or remotely through analog...

Read More »
Neagle Choice, LLC Announces New Available Services
Sponsored

Neagle Choice, LLC Announces New Available Services

Neagle Choice has long been known as a quality source for commercial sewing, printing, die cutting, and the manufacturing of a wide range of custom products. Enhancing our service capabilities has been the key to our success, and has driven our growth into many new and exciting markets. Continuing on this trajectory, we now offer precision laser cutting and etching, adding to our long line of manufacturing services. See our video to learn all about it.

Read More »

All Topics