New Converters Products

Converters feature software-programmable output ranges.

SoftSpan(TM) 12-bit LTC1588 and 14-bit LTC1589 are current-output DACs, programmed with 3-wire serial interface to operate in any one of 6 output ranges. All output spans have specifications of Ã-

Converter offers 15 Hz output rate with 50/60 Hz rejection.

Model LTC2435 20-bit analog-to-digital converter maintains 2 ppm integral nonlinearity performance and common-mode-rejection-ratio of 140 dB. On-chip oscillator eliminates need for external frequency setting components. No latency architecture allows single cycle settling for multiplexed applications. Converter comes in 16-pin SSOP package and operates from 2.7-5.5 V supply range. It consumes...

Analog-To-Digital Converter digitizes high-frequency signals.

Model LTC1748 80 Msps, 14-bit converter offers 76.3 dB signal to noise ratio and 90 dB spurious free dynamic range for high speed applications. Undersampling 70 MHz input, unit delivers 75.4 dB SNR and 80 dB SFDR. Sample and hold bandwidth of 250 MHz allows for undersampling of input frequencies in excess of 70 MHz. Input can span Ã-

Monolithic Converter offers 1 minute accuracy option.

Model RD19230FX resolver-to-digital converter provides programmable 10, 12, 14, and 16-bit resolution, dual bandwidth and tracking rates, +5 V only input power, synthesized reference, and A quad B encoder emulation. It utilizes 10 x 10 mm, 64-pin plastic quad flat pack. Operating temperature is -40 to +85Ã-

Confused About Which Screw Drive Style to Choose? Don't Lose Your Head!

This white paper outlines the different types of screw head and drive designs.

Converters utilize 8-bit processor.

Frequency-to-Analog Converters are offered with 6 different mAmp or voltage output options including zero offset choices. Input frequencies up to 5,000 Hz are accepted with 1/f +25 msec response time. Linearity of reading is Ã-

PC card converts DC voltages for bus use.

Dual-function embedded PC card, PC/104-Plus Power Interface, converts DC voltages for output to PC/104 and PC/104-Plus buses, while also providing forced air circulation to embedded systems. Integrating onboard 3.3 Vdc regulator, interface generates +3.3 V for up to 6 A, from +5 Vdc and routes power through PC/104-Plus header for PC/104-Plus peripherals. Board also routes Ã-

DAC suits digital calibration applications.

Model LTC2600 octal, 16-bit VOUT digital-to-analog converter comes in 16-pin narrow SSOP package. Also available in 12-Bit and 14-Bit versions, units guarantee monotonic performance with Differential Non-Linearity of Ã-

Converter integrates Gigabit Ethernet into 10/100 networks.

Standalone version and The Point System(TM) chassis card convert electrical signal of 10/100/1000 Ethernet from copper to fiber. Fiber interface runs at 1000Base speeds, enabling users to connect Gigabit ports on fiber switches. Fiber connectivity options include SX optics and LX dual fiber, with distances up to 65 km, or single fiber up to 40 km. Transmission distances range from 220 m, with SX...

I/O Cards suit PC/104 bus applications.

High-speed, 16-bit, DSP-based A-D cards, Models 4A24-2 and 4A24-5, are 200 and 500 KHz, respectively. Cards feature EEPROM calibration storage and digital zero and span calibration that eliminates need for potentiometers. Choice of 16 single-ended or 8 differential inputs are provided via input multiplexer. Features include input channel scan sequence, averaging option, raw/calibrated data...

DC/DC Converters offer low output noise to 5 mVpp.

Isolated, 15 W, DC/DC converters, offered in single- and dual-output models, incorporate 250 mV dropout linear regulators and control circuit that maintains min constant dropout voltage over line and load temperature and output adjust range. With efficiencies to 88%, units include 6-sided shielding, soft start, adjustable outputs, and short circuit and thermal protection. Also offered: 750...

Sentry Equipment Introduces New Compact Hygienic Automatic Sampler

As a leader in industrial sampling equipment at Sentry Equipment, our success is built on a history of innovation and designs that epitomize value and efficiency. The new Hygienic Automatic Sampler is another example of our dedication to developing quality engineered products. To learn how this product can streamline the sampling process for dry, free-flowing materials, see our new video.