Other Level Controls & Controllers

Controls & Controllers

Single Process Level Controller serves tank filling operations.

Sep 20, 2016

Designed to complement Singer Single Solenoid Operated/Override Control Valves and sensor, LCP-TP provides gives option to control tank fill cycle as well as mechanically control valve while doing so as to allow control of water in system. Unit is programmable with customized level control algorithms and offers local (interactive display) and remote (4–20 mA, Serial Modbus SCADA) control.... Read More

Controls & Controllers, Fluid & Gas Flow Equipment, Green & Clean, Material Handling & Storage, Mounting & Attaching Products

Pulsation Dampener supports AODD pump applications.

May 09, 2016

Constructed of 316L stainless steel with PTFE diaphragm, AODDampener is specifically designed to eliminate pulsations in air operated double diaphragm pump applications. Unit employs automatic air control that utilizes existing compressed air source in AODD pump system for charging. As fluid line pressure increases, air charge in dampener is increased to match it. When line pressure drops,... Read More

Controls & Controllers, Sensors Monitors & Transducers, Test & Measuring Instruments

Liquid Level Indicator has non-electric, dual-chamber design.

Sep 28, 2015

Incapable of freezing, nitrogen-filled model 5101 has front chamber that houses readily viewable color flag and another housing that holds magnet and float. These separate chambers, manufactured with either Brass or 316 SST, can be mounted into female spud and ensure that front flag indicator never comes in contact with liquid being measured. Design also allows use in hazardous locations. Read More

Controls & Controllers

Conductive Liquid Level Controls offer 2-point charge/discharge.

Dec 10, 2014

DIN-rail mounted in 17.5 mm housing, CLD2EB1BU24 accommodates universal 24–240 Vac/dc supply voltage and provides 3 sensitivity ranges and fine tune adjustment (250 Ω to 500 kΩ). With 35 mm-wide, 11-pin, DIN-rail mountable, plug-in housing, CLP2EB1Bxxx provides one mid-range sensitivity adjustment (5–150 kΩ) and 24 Vdc or 24/115/230 Vac operating voltages. All models provide precise... Read More

Controls & Controllers, Software

M.P. Electronics Announces Latest Firmware Upgrade to SC2000 and SC1000

Jul 18, 2014

M.P. Electronics announces its latest firmware revision for its SC1000 and SC2000 Controllers. For the SC2000 Controller, the latest firmware is Version 11, and for the SC1000 Controller, the latest firmware is Version 9. This latest version provides the following three new features: First, the end user now has the ability to remotely control the level input signal. With parameter F19 set to... Read More

Controls & Controllers, Sensors Monitors & Transducers, Test & Measuring Instruments

Single Float Level Transmitters suit shallow tank monitoring.

Jul 16, 2014

As drop-in replacements using existing tank fittings, XM/XT Series provide continuous fluid level monitoring of tanks with depths <20 in. XM/XT-300 Series, constructed from all-wetted polysulfone plastic parts, is direct compatibility with various chemicals, while XM/XT 700 Series comes in stainless steel or brass. Both fluid level transmitters feature 0.14 in. resolution, indicating length... Read More

Controls & Controllers, Sensors Monitors & Transducers, Test & Measuring Instruments

Submersible Pressure Transducer withstands harsh conditions.

Jul 09, 2014

Available with pressure range of 5, 10, or 15 psi, Level Monitor includes Kellems Grip for suspending unit in wetwell, as well as Transducer Vent Bellows to keep vent tube moisture-free and able to breathe with atmospheric changes. Two stage surge suppressor circuit using both MOV and TVS provides high voltage transient protection for transducer circuitry. Where strong currents are... Read More

Controls & Controllers, Material Handling & Storage, Test & Measuring Instruments

Tilt Level Controls suit dry bulk material applications.

Oct 18, 2013

Designed for dry bulk material level indication and control applications, UL Listed Control Units have cast aluminum housing fitted with LED Indicator lights that alert operator to presence or absence of material. Control unit allows for 5,000 ft (max) of cable between itself and probe, permitting placement of Control Unit in accessible area. Supplied with shock- and vibration- resistant SMT PCB,... Read More

Controls & Controllers, Machinery & Machining Tools, Sensors Monitors & Transducers, Test & Measuring Instruments

Water Cut Monitor incorporates temperature compensation.

Aug 14, 2013

Temperature compensated (TC) version of Universal IV™ CM offers accurate water cut measurement in 0%–1%, 0%–5%, 0%–10%, and 0%–30% water ranges. Accuracy reaches 0.03% water, while measurement resolution is 0.0002% water. Cote-Shield™ technology ignores coating buildup on probe and puts sensing area of instrument directly into process stream. Installed directly into main process... Read More

Controls & Controllers, Electrical Equipment & Systems, HVAC, Sensors Monitors & Transducers, Test & Measuring Instruments

Capacitive Level Sensor suits rugged coolant applications.

Jul 26, 2013

Designed to resolve emergency generator failure issues stemming from coolant level sensor, CAP-300 uses capacitive technology, which is tolerant of coolant coating, and has sealed (IP67, IP6K9K Approved) design for consistent operational reliability. Sensor remains reliable in standby mode with nearly zero maintenance and is compatible with temperatures from -40 to +257°F. Other... Read More

Controls & Controllers, Sensors Monitors & Transducers

Ultrasonic Level Transmitter/Controller has 4-20 mA output.

Jun 24, 2013

Non-contact LVCN210 series ultrasonic level transmitter and controller provides continuous level measurement up to 9.8 ft with 4–20 mA signal output. It features 4 programmable relays, PVDF transducer, and 6P polycarbonate enclosure. Also featuring automatic temperature compensation to optimize accuracy, CE-compliant product can be used in corrosive, sticky, or dirty liquids. It is suitable for... Read More

Controls & Controllers, Electronic Components & Devices, Sensors Monitors & Transducers

Photoelectric Sensors offer range of models and 3-step setup.

Jun 21, 2013

Used for position sensing in industrial automation applications, OI Series features all-metal housing, supports setup in 3 steps using multi-turn potentiometer technology, and delivers reliable optical performance independent of target color. Diffuse background suppression models offer 50–800 mm range, fixed range models are effective from 25–600 mm, and polarized retroreflective... Read More

Controls & Controllers

Electric On-Off Level Controller targets production systems.

May 08, 2013

Combining knife-edge sensing design with aerospace quality switch technology, Fisher® L2e uses force-balanced displacer sensor to detect level of single liquid or interface of 2 liquids. Fully electric level control loop, consisting of L2e level controller used in conjunction with Fisher easy-Drive™ electric actuator powered D3 or D4 control valve, helps to eliminate emissions. In addition,... Read More

Controls & Controllers

Liquid Level Controller offers field-settable operation modes.

May 02, 2013

Built to survive wet, corrosive, aggressive environments, TANK ALARM comes with 10 ft long piggyback cord and mounts directly on tank with 2 in. NPT thread. Liquid level is maintained automatically between high and low float switch, which cycles pump on and off. If level gets too high, third float switch triggers high-visibility flashing beacon light and audio buzzer. Adjustment of working... Read More

Controls & Controllers, Electrical Equipment & Systems

Point Level Switches support safety applications up to SIL3.

Dec 04, 2012

Liquiphant FailSafe FTL8x series offers 2 relay outputs, 4–20 mA output that connects to failsafe switching unit with 2-channel output, safety contacts, and safety locking function. Built-in diagnostics monitor tuning fork-type sensor for damage, corrosion, material buildup, and mechanical blocking, and switches support min and max level detection in liquids from -76 to +536°F,... Read More

Controls & Controllers, Sensors Monitors & Transducers

Pump Station Level Controller features redundant level sensing.

Nov 13, 2012

Equipped with non-contact ultrasonic sensor, PSL 5.0 is suitable for sewage lift stations, wet wells, and storage tanks. Users can also connect loop-powered pressure sensor for redundant sensing in applications with foam or grease. Controller will continuously recalibrate pressure sensor and automatically switch back and forth from ultrasonic to pressure sensor as required. In addition to... Read More

Controls & Controllers

Redpine Signals Offers Complete Suite of Wireless Technology for System-on-Chip (SoC) Integration

Nov 12, 2012

The new PSL 5.0 Pump Station Level Controller from Greyline Instruments features redundant level sensing. It includes a non-contacting ultrasonic sensor and you can also connect a loop-powered pressure sensor for redundant sensing in applications with foam or grease. The PSL 5.0 will continuously recalibrate the pressure sensor and automatically switch back and forth from ultrasonic to the... Read More

Controls & Controllers, Test & Measuring Instruments

Tuning Fork offers liquid/solid interface option.

May 15, 2012

Providing electronic vibratory level control, LP1000/LP2000 Pulse Point Tuning Fork is effective in lightweight powders and granular solids. Measuring device features vibration-resistant surface mount components and universal power supply that includes 24 Vdc. With FM and ATEX agency approvals, unit is dust ignition proof and explosionproof. Read More

Controls & Controllers

Float-Free Level Control targets pressure-powered pumps.

Jan 06, 2012

Designed to retrofit major float-operated pump brands, Float-Free Level Control Assembly features drop-in, bolt-on mounting flange to facilitate upgrade. Unit incorporates 2-probe level control and NEMA classified control assembly. External to tank, motive pressure 3-way valve enables visual check of operation. Assembly has no moving parts in contact with condensate, and no springs, linkage, or... Read More

Controls & Controllers, Test & Measuring Instruments

Level Probe Converter provides 4-20 mA signal for controllers.

Sep 06, 2011

Powered by 24 Vdc, LPC420 senses liquid level and provides 4-20mA analog output for use by pump controller or PLC in liquid level control applications. All setup is done using 4 DIP switches on unit, and sensitivity is set for type of liquid being detected. Analog output delay setting controls how fast analog output transitions from one level output value to another. Supplied in aluminum... Read More