Serial Server Ethernet-enables unused ports.

Serial Server Ethernet-enables unused ports.

Vlinx Model ESP901 Serial Server allows unused serial ports to be connected to LAN or Intranet, enabling users to monitor and program devices from remote office. Ethernet-to-serial server connects RS-232/422/485 serial devices to Ethernet LAN/WAN and operates in Direct IP Mode, Virtual COM Mode, and Paired Mode. Unit has asynchronous 9-pin serial port and 10/100 Mbps Ethernet RJ-45 connection.

Read More »
Signal Devices are suited for dangerous applications.

Signal Devices are suited for dangerous applications.

Explosion-proof lights, horns, alarms, beacons, and buzzers, suited for outdoor or harsh environments, meet specifications of EN 50014-50020 and 50028 and carry IP 55 to IP 67 protection ratings. Decibel ranges start at 90 dB for buzzers, increasing to 105 and 108 dB for horns. Flashing and rotating light beacons are equipped with rust-proof, wire protective cages, and signal towers are...

Read More »

Optical Encoder suits dynamometer applications.

Suited for company's non-contact, infrared rotary torque sensor line, 1024 optical encoder provides accurate means of measuring torque and angle in dynamometer applications. Sensor includes digital infrared transmission system, which provides immunity to noise sources such as eddy current brakes or AC motors. It also offers analog output to represent torque load, and is designed as drop-in...

Read More »
Structured Wiring Products suit small office applications.

Structured Wiring Products suit small office applications.

Products manage delivery of voice, data, audio, and video functions to any selected area. Offerings include network enclosures; networking, distribution, and splitter hubs for phone and fax lines; cable, satellite, and antenna TV programming; computer, electronic file, printer, and Internet access; and video/audio content from VCRs, CDs, DVDs, and stereo receivers. Networking hubs include...

Read More »
How to Choose the Right Adhesive Tape for Your Application
Sponsored

How to Choose the Right Adhesive Tape for Your Application

With a considerable number of adhesive materials, applications and methods, there are many options to consider when choosing an adhesive tape. As NADCO® is a leading manufacturer of custom tapes and labels; we took our years of experience to create this handy selection guide on choosing the right adhesive tape for your application.

Read More »

Ethernet Device Driver communicates to Siemens PLCs.

Siemens S7-200 works in conjunction with proprietary OPC Server KEPServerEX to provide data exchange between OPC Clients and Siemens S7-200 PLCs using TCP/IP Ethernet protocol. Requiring CP- 243 communications module, ethernet driver talks directly to S7-200 series PLCs using standard PC network interface card and does not require any additional software packages or libraries.

Read More »
Transceiver uses RF232(TM) transparent protocol.

Transceiver uses RF232(TM) transparent protocol.

AC4490 900 MHz spread spectrum transceiver interfaces via serial TTL level connection to provide transparent, bi-directional wireless communication in point-to-point and point-to-multipoint, client/server, or peer-to-peer networks. Using FHSS technology, module provides interference rejection, enables co-located system operation, and maintains data integrity. With data rate to 115.2 Kbps, it...

Read More »
Absolute Encoders offer 24-bits of resolution.

Absolute Encoders offer 24-bits of resolution.

KÃ-¼bler by TURCK multiturn absolute encoders are offered in shaft and large bore hollowshaft models, with Class 2 Profibus-DP fieldbus communication protocol, supporting user specific configuration and diagnostic programming. T-coupler box includes address DIP switches and on-board terminating resistor. Units are rated IP65 and IP66 with shaft seals. Non-contact Intelligent Sensing...

Read More »
Network Switch has five 10/100 transceiver ports.

Network Switch has five 10/100 transceiver ports.

Providing non-blocking switching performance, 10/100 Ethernet Switching Hub provides method for networking up to five embedded computing devices with 10BaseT or 100BaseTX Ethernet connections. Measuring 3.550 x 3.775 in., device is available in 2 configurations for PC/104-based systems and 2 models that work with embedded computer environments. PC/104 models include 104-pin/socket header, while...

Read More »

Fiber Optic Transmission System suits field/studio environment.

Pure Digital Fiberlink-® 7130 Series provides transmission of 15 MHz wideband composite video using 10-bit video processing and 4 independent audio channels over single fiber. System is compatible with all video formats, including NTSC, PAL and SECAM. Audio channels may be used for 2 channels of stereo or 4 independent channels. With all digital processing and signaling, system guarantees no...

Read More »
Handheld Receiver System is multi-band switchable.

Handheld Receiver System is multi-band switchable.

Wolf(TM) multi-band, continuous wave system works with HP/ Compaq's iPAQ-® PocketPC-® in sweeping, analyzing, and optimizing PCS and Cellular networks. Receiver performs full spectrum sweeps including channel/compare, adjacent channel, best servers, and scan table measurements. Wolf utilizes Microsoft's-® PocketPC 2002-® interface for navigation, display and storage of all collected data.

Read More »
Locon Sensors Withstand Extreme Temperatures
Sponsored

Locon Sensors Withstand Extreme Temperatures

Locon Sensor Systems offer robust sensor solutions for even the most severe environmental conditions. Their line of high-temp inductive sensors and their cylindrical photoelectric series can operate in temperatures up to 250 degrees Celsius. See our video to learn more.

Read More »

All Topics