Telephones

Telephone System offers conferencing security.

ReadyConference(SM) enables users to have virtual audio conferences without the need for operator assistance. Optional SecureTouch(SM) package of security features such as moderator validation, conference lock, moderator controlled roll call, voice on entry/exit, and on-hold music, offers flexibility of applying high-level security to individual conference calls.

Read More »
Miscellaneous Distribution Systems

Set Top Box is scalable and customizable.

Portal Gold MediaLink STB utilizes chipset for MPEG-1, MPEG-2 and MPEG-4 decoding and 5350 display chip for 3D graphics. It comes standard with 2 USB ports, serial port, Ethernet port, audio in/out, S-Video, composite video, and microphone input for videoconferencing. Facilitating easy expansion, unit also contains PCI slot, 2 mini PCI slots, Compact Flash connector, IDE hard drive connector,...

Read More »
Converters

Chipset supports data rates up to 12.5 Gb/sec.

Model iTH10-4000 electronically converts non-return-to-zero (NRZ) input signal into return-to-zero (RZ) output signal, which is then directly amplified by modulator driver for use in OC-192 long haul and ultra long haul fiber optic networks. Chipset requires input voltage of 500 mV to deliver singled ended data output voltage of 8 Vpp.

Read More »
Transmitter/Receiver offers range up to 10 miles.
Transmitters

Transmitter/Receiver offers range up to 10 miles.

Long Range Radio Control Transmitter and Receiver are for use in wireless remote control applications. Crystal controlled transmitter accepts dry contact input and transmits encoded message to receiver. Encoding is done via FSK (frequency shift keying). Upon detection and verification of encoded control signal, receiver triggers remote device via dry contact. Single, four, and sixteen channel...

Read More »
Data Links

Optical Data Transmitter operates at 2 Mbits/sec.

Model DDLS 200 contactless data transmission unit works over distance up to 300 m. It comes ready to work with Allen Bradley DH+/RIO, Profibus and interbus interfaces. Dimensions of 90 x 190 mm allow for mounting in almost any position, and Single Hand Adjustment system allows one person to adjust light beam with high degree of accuracy. DDLS 200 is suited for logistics applications since it can...

Read More »
Vertical-Lift Stage provides high precision.
Positioners

Vertical-Lift Stage provides high precision.

Model ANT-4V offers speeds up to 50 mm/sec, 2 nm resolution, when combined with MXH multiplier, 60 picometers with Automation 3200, and 200 nm accuracy. Non-cogging, non-contact direct drive employs direct position feedback. All critical elements of ANT-4V are suitable for continuous operation and stage requires no maintenance.

Read More »
Product Suite suits embedded wireless networking.
Embedded Systems

Product Suite suits embedded wireless networking.

EmberNet utilizes intelligent mesh-based topology (scalable into tens of thousands of nodes) and routing algorithm to route around typical interferences. Operating in 900 Mhz ISM band, EmberNet hardware uses direct sequence spread spectrum radio with twelve channels and employs hardware-based encryption. Product suite consists of: EmberNet Node, 8-bit microcontroller hardware; EmberNet Gateway,...

Read More »
Differential Multiplexers switch up to 20 channels.
Multiplexers

Differential Multiplexers switch up to 20 channels.

Solid-state 7710 multiplexer modules offer automatic cold junction compensation capability for temperature measurement with thermocouples. They accommodate differential signals up to 60 V and 0.1 A and have insertion loss of less than 3 dB up to 2 MHz. Model 7700 differential multiplexers include latching electromechanical relays, which enable signal bandwidths up to 50 MHz. They handle signals...

Read More »
Strain Gage Amplifiers handle multiple channels.
Controls and Controllers

Strain Gage Amplifiers handle multiple channels.

MAC MultiAmplifier Card and IMUX Tension Multiplexer provide multi-point tension monitoring. MAC amplifies signals from up to 8 tension transducers or load cells, and supplies corresponding number of 0 to 10 Vdc signals. Signals may be used as inputs to drives, PLCs, or other control devices. Additional 0 to 1 mA or 0 to l00 microA signal is supplied as meter output. IMUX can select and display...

Read More »
Ethernet Hub provides networking distances up to 15 km.
Electronic Hubs

Ethernet Hub provides networking distances up to 15 km.

Industrial Ethernet Series (EIS) consists of 6-port, 10/100 Mbps auto-negotiating switching hubs, with mix of four 10/100 twisted-pair copper ports and two 100 Mbps multi-mode or single-mode fiber ports. Model EIS6-100T/FC supports SC-style connectors, Model EIS6-100/FT supports ST-style connectors, and Model EIS6-100T/FCS supports SC-style connectors and single-mode fiber. Low-voltage power,...

Read More »
Precision Machining Solutions with Over 25 Years of Experience
Sponsored

Precision Machining Solutions with Over 25 Years of Experience

Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers