Digitizer/IF Receiver provides distortion-free data.
Signal Receivers

Digitizer/IF Receiver provides distortion-free data.

Model VM2601 is a dual-channel, 14-bit, high-speed waveform digitizer with true differential 80MSa/s DSO channel and dedicated frequency domain IF digitizer channel. Pre- and post-triggering functionality is provided in addition to auto re-arm capabilities, sleep mode, onboard memory, and dual-channel synchronization. User can select from multiple input impedances, software selectable low pass...

Read More »
Telephones

Fixed Wireless Telephones offer voice/text capabilities.

With customized user interface, 410 Series features GSM (Global System for Mobile communications) and GPRS (General Packet Radio Service) technology for voice, Internet, email, and text-message transmissions. Products plug into standard AC power outlets and communicate over cellular networks. They support 850/1900 and 900/1800 radio frequencies. Features include hands-free operation, phone number...

Read More »
Network / Communications Monitors

System manages end-to-end application performance.

Model NP-2000 incorporates Automatic Autonomous System Discovery (AASD), which enables users to monitor and troubleshoot IP service performance across Multi-Protocol Label Switch (MPLS) cloud. Product measures critical metrics such as usage and utilization, network performance, server performance, and client performance. Deployed at major data aggregation points to analyze real-time traffic...

Read More »
Multiband Receivers offered in 3U and 6U form factors.
Signal Receivers

Multiband Receivers offered in 3U and 6U form factors.

Equipped with synchronization system that supports up to 1280 channels, multiband-receiver boards are offered in 3U, 16-channel and 6U, 32-channel models. Both feature four 14-bit A/D converters and two 3-million gate Xilinx Virtex-II FPGAs for signal processing. Boards consist of one or two Model 7131 digital receiver PMC modules and PMC-to-cPCI adapter assembled as one cPCI board. Features...

Read More »
Medical Puller helps hospital workers position beds.
Positioners

Medical Puller helps hospital workers position beds.

Measuring only 13 in. high, battery-driven ERGOtug MÂ-² slides under one end of bed, while automatic hitch slightly lifts 2 of bed's wheels off ground. Operator can reposition bed using controls on handle to turn, stop, back up, or go forward. ERGOtug M² can remain attached to bed frames during transport in elevators. It offers load capacity up to 1,800 lb and maximum speed of 4.5...

Read More »
Transceiver suits local-area industrial communications.
Transceivers

Transceiver suits local-area industrial communications.

Model AC4490-1W provides 1 W output, allowing data transmissions of 115.2 Kbps across 20 mile line-of-sight. Unit utilizes RF232(TM) protocol to manage over-the-air concerns such as interference rejection, error detection, addressing, security, and link verification. Transceiver, with 1.65 x 1.9 in. footprint, is suitable as direct cable replacement requiring no special host software for...

Read More »
RF Wireless Backup reports alarm conditions.
Telemetry Systems

RF Wireless Backup reports alarm conditions.

StarLink(TM) reports alarm conditions to any central station over dedicated digital network that spans US, Virgin Islands, and Puerto Rico. StarLink SL-1 Unit and service enables users to utilize backup alarm reporting regardless of telephone line condition. Able to work with any control panel, it supports all central station formats and has standby current of less than 20 mA, which maximizes...

Read More »
Wireless I/O Communication System suits Division 1 areas.
Communication Systems

Wireless I/O Communication System suits Division 1 areas.

XANT explosion-proof I/O transmitter/receiver system features impact-resistant, cast aluminum enclosure that houses transmitter. System utilizes spread spectrum frequency hopping techniques to provide interference-free link between remote devices and control room. In-plant range is 600-1,000 ft with no line-of-sight. Capable of carrying one 4-20 mA analog signal, system features 1 W transmitter...

Read More »
Signals

Audible Signal Device has 6 x 5 in. footprint.

Adaptatone Millennium Mini-Mi features modular design that delivers appropriate solution for any application where audible devices are appropriate: speaker amplifier, stand-alone tone generation, or field-recorded voice operation. Compact, weatherproof unit is available with RS485 connectivity and UL 1971-rated strobe. It is compatible with Millennium Event Driver Interface software for remote...

Read More »
Copper Transceiver suits 10 Gbit-CX4 Ethernet applications.
Transceivers

Copper Transceiver suits 10 Gbit-CX4 Ethernet applications.

Compliant with X2 multi-source agreement specification Rev. 1.0b, X2 x-mGC copper electrical transceiver module transmits 10 Gb/s Ethernet over 20 m of InfiniBand copper cable (AWG24) or VSR parallel optics through single port. Using embedded media detect converter circuit, transmission up to 300 m over multi-mode can also be achieved with o-MGC optical media converter. Unit has integrated...

Read More »

All Topics