Transceiver Modules use software to boost data transmission.
Transceivers

Transceiver Modules use software to boost data transmission.

Wireless easy-Radio modules utilize V2 firmware, which provides features such as brown-out settings recovery, and all radio communications and data I/O software is embedded in fully compliant module. Along with user-selectable frequency, data-rate, and power output, modules offer ±10 ppm frequency tolerance, -40 to +85°C operating temperature range, and user-defined defaults. Channel...

Read More »
Stand-Alone Radios connect to RS-232 or USB devices.
Radios

Stand-Alone Radios connect to RS-232 or USB devices.

Compatible with networks operating on XBee and XBee-PRO technology, XBee-PRO Radios feature aluminum housing, 2.1 dBi dipole antenna, and choice of RS-232 or USB connection. Communicating at up to 250 Kbps, 2.4 GHz units include 100 mW XBee-PRO RF module, which is capable of transmitting up to 0.9 miles in line-of-sight conditions.

Read More »
Network Appliance Platform features mini PC and 4 LANs.
Network Equipment

Network Appliance Platform features mini PC and 4 LANs.

Utilizing ULV Intel® Celeron® M processor with Intel® 852GM North Bridge chipset, Model NA-0043 provides four 10/100 Mbps Ethernet ports. It supports LAN-bypass feature for abnormal status as well as different bypass levels such as power, BIOS boot, OS, and applications program failures. For system log-ins with monitoring and building control proxy, unit has space for 2.5 in....

Read More »
Telephones

Wireless IP Phone runs on real-time Linux operating system.

Built on open standards, WIP 2 is compatible with any IP telephony system using Session Initiation Protocol. It incorporates jitter buffer for speech quality, provides 2 call appearances, and supports voice encryption, paging, 3-way conferencing, presence, instant messaging, and all standard telephony functions. In speaker phone mode, full duplex acoustic echo cancellation ensures optimal sound...

Read More »
Air Amplifiers and How They Work
Sponsored

Air Amplifiers and How They Work

Air amplifiers are pneumatically driven devices that use shop air to provide the motive power for increasing air pressure. This white paper provides an in-depth overview into the air amplifiers and how they work.

Read More »
Operator Interface Terminal has emergency stop switch.
Computer and Communication Terminals

Operator Interface Terminal has emergency stop switch.

Featuring 24- or 40-key membrane/steel snap dome keypad, handheld QTERM-G55 can be equipped with one EIA-232, -422, or -485 serial port; Ethernet 10Base-T; or Power-over-Ethernet interface. Its 2-pole (4-wire) NC E-stop switch is placed above terminal display to facilitate access without hindering normal terminal operation. HMI terminal has 3.8 in., 320 x 240 pixel color LCD display and uses...

Read More »
Communication Systems

Communicatons Node enables mobile-to-application messaging.

Built using SS7 signaling hardware and SMSC software, MobileInput provides virtual mobile functionality for receiving of inbound SMS messages from mobile telephones by applications for range of different services. Single node can handle up to 300 SMS per second. MobileInput is suited for applications such as voting, asset tracking, consumer response, information retrieval, and competitions.

Read More »
Transmitters and Receivers work at distances to 1,000 ft.
Transmitters

Transmitters and Receivers work at distances to 1,000 ft.

Providing fiber-optic transmission of command signals and encoder feedback, TA821 Copper Reduction modules convert electrical encoder, hall sensor, and limit signals to optical signal and back into electrical signals. Products, mounted with motor and on linear stage, are available in 1-, 2-, and 4-axis units that operate on 5 Vdc and feature power-on status indicating LED. Modules measure 3.50 x...

Read More »
Transceivers

Single Chip Optical Transceiver consumes 210 mW of power.

Optimized for speeds from 1-3.125 Gbps, SRL3101NST optical PMD (transceiver) chip integrates transimpedance amp (TIA), limiting amp, VCSEL driver, digital diagnostics, and LVDS interface. It is designed for use with VCSELs and PIN/APDs in VSR applications. Along with integrated temperature sensor and internal closed loop feedback, features include single +3.3 V operation, peak-to-peak jitter of...

Read More »
Clips

Detachable Clips keep gloves within reach at all times.

Squids® Glove Grabbers(TM) hold gloves of every style and thickness for virtually any application. Model 3400 attaches to pant belt loop, while Model 3405 clips onto standard belt or tool belt. Both non-conductive, lightweight units are detachable and available in black, blue, high-visibility orange, and high-visibility lime.

Read More »
Ethernet Switches are enhanced for bandwidth and security.
Switches

Ethernet Switches are enhanced for bandwidth and security.

Available on EICP_M, EISX_M, and EISB_M products, Internet Group Management Protocol snooping restricts transmissions to ports in request, rate limiting limits device bandwith, and port security passes traffic only from specified devices. QoS enhancements, Diffserv, IEEE 802.1p and TOS, allow priority to specific ports or messages through a managed switch.

Read More »

All Topics