Coating Equipment

Conformal Coating Applicator offers 3 modes of operation.
Coating Equipment

Conformal Coating Applicator offers 3 modes of operation.

Model SC-300 Swirl Coat(TM) allows application of conformal coatings to circuit boards in bead, monofilament, and swirl operation modes with variable dispensing pressure, volume, and shape of air assist. It applies solvent-based and 100% solids coatings with viscosities from 30-3,500 cp. Exposed, zero cavity nozzle design reduces clogging, while low fluid pressure and fine control of film...

Read More »
Epoxy Coating System cures at elevated or room temperatures.
Coating Equipment

Epoxy Coating System cures at elevated or room temperatures.

The E958-12A Epoxykits, pre-measured, 2-component epoxy coating system, allows for mixing of both components within provided package. Coating cures tack-free in 4-8 hr and obtains complete cure after 96 hr at room temperature. Product may also be fully cured in 5 min at temperatures of 212°F. Properties after cure include insulation resistance at 77°F at 1.1 x 1012 ohms and 82 Shore D...

Read More »
Coating System applies thin films to flat substrates.
Flux

Coating System applies thin films to flat substrates.

Prism(TM) 100 utilizes Ultra-Spray® ultrasonic technology for control of coating quality and thickness. Substrate moves in defined increments while spray head moves transversely to apply coating. System works with liquids from low-viscosity fluxes and solvents to viscous adhesives, conformal coatings, conductive inks, and photo imageable materials. It has 18 x 18 in. spray application area...

Read More »
Extrusion Coating Machine suits short production runs.
Coating Equipment

Extrusion Coating Machine suits short production runs.

Flex-Master 1300 extrusion coating machine handles runs of 1-2 hr for flexible packaging structures, including LDPE, LLDPE, m-LLDPE, Surlyn, and EVA. Coating speed is up to 300 m/min for 1000 mm dia finished rolls. The 65 and 75 mm co-extrusion stations use feed-block and 1500 mm die with internal deckles. Three-roll laminator has linear-nip arrangement, 450 to 760 mm chill roll, 200 mm...

Read More »
Embedding Station uses modular components.
Coating Equipment

Embedding Station uses modular components.

Model EG1150 incorporates EG1150 C cold plate with cooling surface that accommodates 70 molds, and EG1150 H heated paraffin dispensing module, which offers programmable feature for working times and temperatures, 3-liter paraffin reservoir and adjustable dispensing flow rate. System includes 2 heated, removable paraffin waste trays, and removable and interchangeable cassettes and mold warmer....

Read More »
Cable-Coating Systems precisely apply talcs and powders.
Coating Equipment

Cable-Coating Systems precisely apply talcs and powders.

Series ECC 700 fluidizes, charges, and sprays cable with various powders, including talcs and super-absorbent powders. Pumps maintain adjustable, even flow of powder to obtain desired coating thickness. Closed-loop powder recovery feature prevents powder from being released into environment. Tribomatic® spray gun charge results from friction between powder and inner surface of gun, while...

Read More »
Spin Coat Systems coat materials on planar substrates.
Coating Equipment

Spin Coat Systems coat materials on planar substrates.

Spincoat G3 Series incorporates microprocessor-based, closed loop servomotor control for speed regulation. Units include 8, 12, and 15 in. bowl models in 3 enclosure sizes. Eight in. model is available in non-programmable and programmable versions, while 12 and 15 in. models are available as programmable units only. Programmable units can store and execute 30 programs having up to 20 individual...

Read More »
Tungsten Carbide Applicator extends life of tools up to 1000%.
Coating Equipment

Tungsten Carbide Applicator extends life of tools up to 1000%.

Carbitron 300 consists of adjustable power supply and vibration hand tool. Tungsten-Carbide deposition layer forms true metallic bond with work surface with hardness of 78-80 Rockwell C. Thickness of deposition layer is controlled by discharge intensity selector on power supply and may be varied from 0.0002 to 0.001 in. in increments of 0.0002 in. Process protects wear surfaces, and improves...

Read More »
Spray System coats metallic and non-metallic substrates.
Coating Equipment

Spray System coats metallic and non-metallic substrates.

Cold Gas Dynamic Spray (CGDS), based on thermal spray concepts, eliminates use of high temperatures. Materials are not melted in coating process. System applies powder coating materials such as aluminum, aluminum composites, copper, super alloys, silver, and titanium. System offers electrical conductivity, thermally conductive, and corrosion resistant properties. CGDS is suitable for metal...

Read More »
Color Change Powder System operates at 1000 CFM.
Paint Booths

Color Change Powder System operates at 1000 CFM.

QualityCoat(TM) ColorChange booth includes removable cartridge module for color change. Variable speed motor drive controls booth containment air. It has built-in self-diagnostics, and provides motor status readout, voltage surge protection, and phase loss detection circuits. Fan speed can be preset or infinitely variable. Unit is equipped with electrical control panel and booth pneumatic control...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers