Stepper Motor Driver IC suits automotive applications.
Model A3980 features fault diagnostics and reporting and has integrated DMOS outputs, which are protected against short-to-battery and short-to-ground. STEP and DIRECTION interface allows for up to 1/16th microstepping without complex system controller. Output drivers operate between 7-35 V and will typically run up to 1 A of output current. Offered over junction temperature range of -40 to...
Read More »
Power Conversion IC comes in 2 x 1 mm package.
Operating at 3 MHz fixed frequency, TPS62300 step-down, 500 mA dc/dc converter extends battery life in space-constrained applications. Synchronous, switch-mode, power management IC with integrated FETs delivers 93% power conversion efficiency and -0.5 to 1.3% voltage regulation accuracy. Series TPS6107x synchronous switch, 600 mA, dc/dc boost converters support input voltages of 0.9-5.5 V and...
Read More »
Battery Management IC is used in portable applications.
Providing safe, reliable charging of Li-Ion or Li-Polymer batteries, bq24100 synchronous, switch-mode battery charge IC features internal power FETs capable of supplying up to 2 A charge current. It charges in 3 phases and operates at fixed frequency of 1.1 MHz from input voltage up to 16 V. Housed in 3.5 x 4.5 mm QFN package, product delivers current and voltage regulation, multiple charge...
Read More »
RF Active Transmit Mixer is suited for 3G basestations.
Housed in 16-pin, 4 x 4 mm, surface-mount QFP package, LT5521 provides linearity and signal-to-noise performance that allows designers to build compact 3G cellular basestations. It incorporates differential input and output architecture, supporting linearity over operating frequency range of 10 MHz to 3.7 GHz. Able to be used in upconverting or downconverting application, product requires -5 dBm...
Read More »
Lower Barriers to Delivering Integrated Supply Solutions
A commitment to integrated supply is not for the faint of heart, and requires substantial resources dedicated to sourcing, logistics, taxonomy and identification, multi-shift supply room staffing, KPI reporting and more. How do you get into this space while overcoming significant barriers to entry?
Read More »
Controller ensures maximum CPU speed without overheating.
Housed in 38-lead, 5 x 7 mm QFN package, LTC3738 Intel VRM10 Pentium® 4 power supply controller provides precision current balancing and remote thermal monitoring capabilities. PolyPhase(TM) multichannel step-down dc/dc controller integrates 3 synchronous MOSFET drivers and is scalable from 3-12 phases to meet CPU load current requirements from 60-200 A. Unit distributes power equally among...
Read More »PLL Hard Macros save chip space.
Phase-Locked Loop (PLL) hard macros feature die size of approximately 0.07 mmÂ-² in 0.13 µm generation technologies. Area includes dividers and required digital support logic, supply bypass capacitance, and block isolation. Built to support wide frequency and multiplication ranges, products offer low-jitter performance over entire operating range. LockNow! technology improves PLL...
Read More »
Voltage Reference draws only 5.6 µA.
Model LT6650 features built-in, rail-to-rail output buffer amplifier and ±1% accuracy from -40 to 85Â-ºC. Operating over 1.4-18 V supply range, unit consumes less than 6 µA with supply levels up to 18 V. Using external gain resistors, output voltage can be adjusted from 400 mV up to positive supply rail using on-chip buffer amp. Device can be configured to operate in shunt or...
Read More »
RFID Memory Chip supports EPCglobal Class 1 specification.
Suitable for RFID transponders and tags for supply chain and logistics applications, Model XRA00 is suited for 902-928 MHz and 866-868 MHz bands. When connected to its antenna, chip's power is derived from RF energy produced by RFID readers. Operating up to 10 m from reader, chip contains 128-bit memory organized as 8 blocks of 16 bits. First block stores 16-bit CRC and next 6 blocks store 96-bit...
Read More »Fiber Optic Devices are offered in various styles.
CFE370, CFD470 and CFR520 feature self-aligning plastic lens caps, while CFR530 is a flat window, metal lens can device that provides hermetic seal. CFE370 contains an 850 nm AlGaAs DDH high speed fiber optic emitter with microlens centered on chip for efficient coupling. CFD470 contains 850 nm fiber optic PIN photodiode with 950 milÂ-² active area. CFR520 and CFR530 contain 5 Mb direct...
Read More »
Rotary Encoder IC comes in 5.3 x 6.2 mm package.
Multiple output, 10-bit system-on-chip, Model AS5040 integrates field sensing Hall elements, analog front-end, and digital signal processing. It operates in contactless system with small magnet that is placed above or below device. Operating at 3.3 or 5 V, encoder provides absolute, incremental, and pulse width modulated digital output signals simultaneously. It can detect 1,024 positions in full...
Read More »
The Carbontec System: A Smarter Way to Heat Your Buildings
Carbontec's paper-thin radiant heating systems reduce energy consumption costs by warming the building surfaces instead of controlling air temperature. Check out our video to learn more.
Read More »
