Microcontrollers incorporate Core Independent Peripherals.
Helping designers overcome power and size limitations, 4 x 4 mm PIC32MM series offers Core Independent Peripherals and delivers low-power embedded control for IoT, consumer, industrial, and sensorless BLDC applications. Core Independent Peripherals, such as configurable logic cells (CLC) and multiple-output capture compare PWMs (MCCPs), offload tasks from CPU to lower power consumption and...
Read More »
DC/DC Buck Converter offers DDR memory power solution.
With 2.95–6 V input, Model TPS54116-Q1 offers power management solution for DDR2, DDR3, and DDR3L memory subsystems in automotive and industrial applications. Integrated low- and high-side power MOSFETs and 1 A peak sink/source DDR VTT termination regulator support 4 A of continuous output current. Supplied in 4 x 4 x 0.75 mm WQFN package, synchronous step-down converter provides up to 2.5 MHz...
Read More »
Custom MMIC High Performance DC-18 GHz Switches and MMIC Amplifiers to 36 GHz on Display at European Microwave Week 2016
Chelmsford, MA – Custom MMIC, a leading developer of performance driven monolithic microwave integrated circuits (MMICs) is pleased to announce attendance at European Microwave Week 2016. Custom MMIC products will be on display with our UK representative, Aspen Electronics, at European Microwave Week (EuMW) in London, this October from the 3rd-7th. Stop by the Aspen Electronics stand #121 to...
Read More »FPGAs and SoCs target Embedded Vision, IIoT applications.
As 28 nm-based FPGA in 8 x 8 mm package, Spartan®-7 provides connectivity solution for legacy and contemporary interfaces. Artix®-7 devices deliver optimized transceiver and signal processing performance with image processing bandwidth in multi-sensor embedded vision, while fully scalable, ARM® processor-based Zynq®-7000 All Programmable SoC single core devices offer single-chip...
Read More »
Pressure Vessels & Their Components
This white paper provides an in-depth look into custom fabricated pressure vessels and their components.
Read More »Vision Platform enables embedded neural networks.
Centered around imaging and vision DSP, CEVA-XM6 brings deep learning and Artificial Intelligence (AI) capabilities to low-power embedded systems. This scalable, integrated hardware and software silicon IP platform lets developers efficiently harness power of neural networks and machine vision for camera-enabled smart devices. Architecture includes vector and scalar processing units as well as...
Read More »MEMS Oscillators provide reliability, stability from -40 to +85°C.
Comprised of Micro-Electro-Mechanical Systems (MEMS) oscillators, DSC6000 series offers 2 KHz to 100 MHz range and is suitedÂ- as clock references in such small, battery-powered devices as wearables and IoT devices. Products come in 4-pin DFN packages, ranging from 1.6 x 1.2 mm to 7 x 5 mm, and also meet AEC-Q100 mechanical durability and reliability requirements. Consuming 1.3 mA...
Read More »Vishay Intertechnology at Electronica 2016 Nov. 8-11 Munich, Germany Hall A5 Booth 141-142, Hall A6 Booth A11-A13
At electronica 2016, Vishay Intertechnology will be highlighting its latest industry-leading passive component, power MOSFET, IC, diode, and optoelectronics technologies for a wide range of applications. New Products on Display at electronica 2016 vPolyTanâ„¢ Multi-Anode Solid Tantalum Chip Capacitors Increase Volumetric Efficiency to Lower Component Counts Combining polymer tantalum technology...
Read More »Keysight Technologies to Demonstrate Latest Measurement, Design Innovations at European Microwave Week
Keysight Technical Experts Will Host In-Depth Workshops and Demonstrate the Latest Test Solutions Highlights: Keysight will demonstrate FieldFox handheld spectrum analyzer’s real-time spectrum capabilities Keysight will celebrate the one-year anniversary of the acquisition of Anite Keysight will host 14 complimentary technical workshops, including radar, satellite, mm-wave/terahertz...
Read More »
SLC NAND Flash Memory (24 nm) targets industrial applications.
Based on 4 x 4 Gb die and supplied in 48-pin TSOP, 16 Gb BENAND™ is optimized for effective write endurance (using 8-bit BCH ECC) as well as read/write performance. ECC is not required from host controller, and this enables use with host controllers that do not have 8-bit ECC capability. Delivering long-term process support, product operates from 2.7–3.3 V supply over -40 to +85°C range...
Read More »RS-485/RS-422 Receivers support high-speed communications.
Available in 5- and 6-pin TSOT23 packages with 3 x 3 mm footprint, Models XR33180, XR33181, XR33183, and XR33184 feature 52 Mbps data rates, 15 ns propagation delay, and 2 ns max receiver skew. XR33184 includes low voltage logic pin that eliminates need for level shifter when interfacing to MCUs or FPGAs that run off lower supply voltages. Operating from -40 to +125°C with 3.3 or 5 V...
Read More »
Simple Connection – MGB with EtherNet/IP
The new MGB with EtherNet/IP is a leap forward in access door safety. Designed for easy installation, flawless performance, and long service life, it is engineered with robust features and cutting-edge technology that places it firmly at the leading edge of the door safety device industry. To learn all about the benefits of the Euchner MGB, see our video.
Read More »
