Microwave PLL comes with integrated jitter of less than 47 fs.
LMX2594 Microwave PLL comes with VCO which generate frequencies from 10 MHz up to 15 GHz. Unit offers phase synchronization, ramp generation and noise floor of -236 dBc/Hz and 1/f of -129 dBc/Hz. Product is capable of synchronizing phases between multiple devices at high frequency and suitable for MIMO and RADAR applications. LMX2594 enables generation of gigahertz frequency sampling and JESD204B...
Read More »
Maxim's Power Management ICs come with multi-channel SIMO regulator.
Maxim's Power Management Integrated Circuits are available in MAX77650 and MAX77651 models. Units feature SIMO buck-boost regulator with 150mA LDO and three current sink drivers that minimizes usage board space. Suitable for use with Bluetooth® headphones, activity monitors, smart garments and smartwatches, MAX77650 and the MAX77651 operates up to 3.3V and 5V respectively with 5.6µA...
Read More »
Custom MMIC's Latest Circuits Added to X-Microwave's Modular Design and Production System
Chelmsford, MA – June 20, 2017 – Custom MMIC, a leading developer of performance-driven monolithic microwave integrated circuits (MMICs) for mil/aero applications, announces an expanded collaboration with X-Microwave LLC, developers of a modular/drop-in simulation, prototyping, and production system for solderless and reconfigurable RF/microwave circuits up to 67 GHz. The X-MWblock™ system...
Read More »SLG46580 Mixed-Signal Integrated Circuits come with GPAK Designer™ Software.
Featuring power monitoring, sequencing, reset and power switching functions, SLG46580 Mixed-signal Integrated Circuit is integrated with four LDOs with 150 mAs maximum output current. Suitable for handheld devices, smart home, consumer and wearable electronics, each LDO comes with programmable output voltage levels that can be set to one of thirty-two values from 0.9 V to 4.35 V. Unit is housed...
Read More »
Troubleshooting Guide: What Your Cranes Wish You Knew
Your guide to crane troubleshooting
Read More »
Power Management Integrated Circuit features 62μA quiescent current.
Available in ISL91211A and ISL91211B models with triple (2+1+1 phase) and quad (1+1+1+1 phase) outputs, ISL91211 Power Management Integrated Circuit is suitable for smartphones, tablet computers, SSDs and networking devices. Embedded with synchronous buck converters that delivers up to 5A output current per phase. I²C and SPI programmable output from 0.3 to 2 V, unit’s automatic diode...
Read More »
SC2M50 Codec IC consumes 3.5 W of power.
Supporting 4K/60p video and 4:2:2 format, SC2M50 HEVC / H.265 Codec IC comes in 25 mm x 25 mm package. Delivering 10-bit input/output, unit is suitable for professional video equipment. Product features Serial flash interface HSSPI x 1 LPDDR4 2400Mbps 16bits x 6 memory interface.
Read More »
SCALE-iDriver™ Integrated Circuits feature short-circuit protection.
Available in SID1132K, SID1152K, SID1182K models with 2.5 A, 5.0 A and 8.0 A peak output drive currents respectively, SCALE-iDriver™ Integrated Circuits come with IGBT and MOSFET driver in eSOP package. Suitable for 600 V, 650 V, 1200 V IGBT and MOSFET switches, units feature switching frequency of up to 250 kHz. Operated in -40°C to 125°C temperature range, product comes with 5 ns...
Read More »
GP695 System on Chip features multi-protocol GP712.
Incorporating IEEE 802.15.4, ZigBee®3.0, Thread and Bluetooth Low Energy (BLE) for sensors and actuators, GP695 System on Chip provides proximity based connectivity by combining with Thread or ZigBee 3.0. Using ARM® Cortex®-M4 computing architecture, unit features Qorvo Wi-Fi interference mitigation technology. Used for smart home devices, GP695 System on Chip supports multi-protocol system.
Read More »
AMC596 FPGA Carrier supports VHDL.
Based on Virtex UltraScale™ XCVU440 FPGA, AMC596 FPGA module is suitable for ASIC emulation and sensor processing applications. Supported by 8GB of 64-bit wide DDR4 and on board power PC P2040, unit provides additional connectivity of over 250 Gbps between neighboring modules by PinoutPlus™.
Read More »Synopsys Test Solution Deployed by Leading Automotive IC Suppliers for Higher Quality, Reliability and Functional Safety
New Capabilities Accelerate Time to Automotive Test Goals and ISO 26262 Certification Highlights: Leading automotive semiconductor suppliers successfully deploy Synopsys' synthesis-based test solution to meet their stringent test goals for higher levels of quality, reliability and functional safety New capabilities include physically-aware test points, pattern reduction, high-performance...
Read More »
Solder Redefined
Indium Corporation has developed a new twist on traditional solder by developing a composite with a reinforced matrix internal structure. The result is a solder with increased strength and reliability. Check out this video to learn more about the mechanics behind the groundbreaking technology.
Read More »
