Circuits

Four-Channel, 14-bit ADC delivers 250 MSPS performance.

Supplied in 10 x- 10 mm BGA package, ADS4449- consumes 365 mW per channel and enables receiver systems to support up to 125 MHz of instantaneous bandwidth in small forms, such as MIMO base stations and munitions guidance, or in greater density applications, such as- AESA and other phased-array radars. ADC delivers 69 dB SNR and 86 dBc SFDR at 250 MSPS, enabling 4-channel receivers capable of...

Read More »

Automotive LED Drivers support dashboard applications.

Featuring 40 V rating on all outputs, Models TLC6C598-Q1 and TLC6C5912-Q1 are monolithic, medium-voltage 8-bit/12-bit shift registers designed for systems that require relatively moderate load power, such as LEDs. Model TLC6C598-Q1 can power up to 8 strings of LEDs, while Model TLC6C5912-Q1- can power up to 12 strings of LEDs directly connected to automotive battery. Both offer thermal shutdown...

Read More »

LIN Transceiver exhibits strong EMC/ESD behavior.

Supplied in SOIC8 package, MLX80030 supports local interconnect network (LIN) bus and enables development of LIN slaves. AECQ100-qualified IC combines- physical layer LIN transceiver with- 3.3 V voltage regulator that has- reset output for system MCU. Based on- 0.35 -µm HV-CMOS process technology, transceiver draws 15 -µA in standby mode. Other features include standby management function,...

Read More »

Industry's First 802.11ac 4x4 Reference Design Specifies ANADIGICS' WiFi FEICs

ANADIGICS Leverages its Unique InGaP-Plus Technology in a Single-Die WiFi FEIC to Reduce Time-to-Market, Achieve Greater Throughput, and Deliver Exceptional Thermal Performance WARREN, N.J. – ANADIGICS, Inc. (Nasdaq: ANAD), a world leader in radio frequency (RF) solutions, today announced that its AWL9281 and AWL9581 WiFi front-end integrated circuits (FEICs) have been selected for use with the...

Read More »

DC-DC Converters use synchronous rectifier technology.

Measuring 5.0 x 5.7 x 2.1 mm, Model LXDC55FAAA-203 supports input voltage of 4.0–14.0 Vdc and provides max output current up to 1.5 A, while Model LXDC55KAAA-205 has input voltage of 2.7–5.5 Vdc with output current up to 3 A. Both step down converters offer voltage trim function that allows adjustment of output voltage within range of 0.8–5.3 Vdc for 55F model and up to 3.6 Vdc for 55K...

Read More »

Brushless DC Motor Driver spins motors instantly.

With operating range of- 5.5–2.1 V, low RDS On of less than 1.5 Ω, and 15 -µA quiescent current, 3-phase DRV10963 extends battery life in fans and portable, battery-powered personal health care and grooming devices. Unit features 180° pure sinusoidal outputs and integrated commutation logic, which enables instant motor spin with no code development. Housed in 3 x 3 mm USON package, driver...

Read More »
Buck Regulator provides ±1.0% output voltage accuracy.

Buck Regulator provides ±1.0% output voltage accuracy.

Designed to meet power supply requirements of car audio and infotainment systems, Model A8580 features input voltage of 4–40 V, switching frequency of 250 kHz to 2.4 MHz, and output current up to 2.5 A. AEC Q100-qualified device can employ pulse frequency modulation- for very low input current while supplying keep-alive voltage. Housed in 16-pin TSSOP package with exposed pad for thermal...

Read More »

Category 4 LTE Chip fosters mobile broadband adoption.

In addition to offering Category 4 throughputs of 150 Mbps DL (Down Link), PXA1088 LTE quad-core 5-mode Category 4 LTE single-chip solution supports LTE TDD and FDD, HSPA+, TD-HSPA+, and EDGE. Other features include WCDMA and TD-SCDMA modem technology with- dual-radio dual link LTE voice solution in addition to- Circuit Switched Fallback (CSFB) voice solution.- Solution incorporates quad-core...

Read More »

Xilinx Achieves PCI Express Compliance across Its All Programmable 28nm Devices

Production-ready devices with integrated blocks for PCI Express Gen2 and Gen3 enable rapid development across a diverse set of applications SAN JOSE, Calif. -- Xilinx, Inc. today announced that its All Programmable 7 series FPGAs and Zynq®-7000 All Programmable SoCs have achieved full PCI Express® compliance and are now listed on the PCI-SIG integrator's list. All of Xilinx's 28nm devices...

Read More »

QuickLogic's Parallel Camera Interface for TISitara(TM) AM335x ARM® Cortex(TM)-A8 Processors Supports Android JellyBean 4.1.2 Operating System

• Complete, ready-to-use parallel Camera Interface solution (CAM I/F) • Enables developers to take advantage of extensive Android ecosystem • Supports BeagleBone open source hardware platform and QuickLogic Camera Cape Sunnyvale, CA – QuickLogic Corporation (NASDAQ: QUIK), the innovator of ultra-low-power programmable Customer Specific Standard Products (CSSPs), today announced that its...

Read More »

All Topics