New: Buy Now on Thomas and Pay Over Time with Credit Key   Learn More

Circuits

Converter Chipset lets HDMI be read by application processor.

Converting- HDMI video stream into MIPI CSI-2 video stream, Model TC358749XBG enables HDMI video stream to be recognized and read directly by application processor in mobile device. HDMI audio stream is also supported and can be transmitted over I(2)S, TDM, S/PDIF, or MIPI SLIMbus. Housed in 7.0 x 7.0 x 0.65 mm ball pitch package, TC358749XBG provides video de-interlacing, video scaling, video...

Read More »

Embedded 0.18 µm BCD Process supports 12-30 V power applications.

Supporting- 12–30 V range, 0.18 -µm embedded Bipolar-CMOS-DMOS (eBCD) technology features BCD high-voltage power devices embedded in- 0.18 -µm standard logic process. Solution is fully compatible with standard CMOS processes and uses high density logic devices (1.8 V) and high performance analog devices (5 V) with low flicker noise.- Traits make process suited for- PMICs, DC/DC converters...

Read More »

UHD-SDI Reclocker targets for 4K broadcast video systems.

Supplied in 48-pin, 7 x 7 mm QFN package, 4-channel LMH1256 allows broadcast video equipment to capture, record, and play back 4K video signals at 60 Hz over- single link of coaxial cable. This 12G ultra-high-definition (UHD) serial digital interface (SDI) reclocker with integrated signal conditioning also supports multi-rate operation at transmission speeds from 270 Mbps to 11.868 Gbps. Also,...

Read More »

Reference Design simplifies isolated digital inputs to PLC.

Intended for industrial PLC digital-input subsystems, Corona Reference Design integrates MAX31911 octal digital input translator/serializer, MAX14850 6-channel digital isolator, and MAX13256 H-bridge transformer, reducing isolated channels and eliminating need for power-hungry optocouplers and discrete parts. Devices used in Corona are designed specifically for harsh industrial environments with...

Read More »

Motor Driver IC supports continuously operating equipment.

Supporting brushed DC motors in industrial and office automation equipment, 2-channel TB67H400A realizes 50 V max rating and On resistance of 0.5 Ω during motor drive output, creating max operating current of 3.0 A/channel. Parallel channel control function delivers 6.0 A max operating current when 2-channel outputs are used as 1-channel driver. Available in ZIP, QFN, HTSSOP, and HSOP packages,...

Read More »
Voltage Variable Equalizer has adjustable attenuation slope.

Voltage Variable Equalizer has adjustable attenuation slope.

Supporting telecom band frequencies from 950–2,150 MHz, VAEQ-2150+ enables very fine attenuation slope control to linearize device over frequency. Units measure 0.394 x 0.394 x 0.150 in. and consume low levels of power, with supply voltages from +3 to +5 Vdc at 15 mA max and control voltages from 0 to +5 Vdc at 10 mA max. IP3 of +55 dBm and typ deviation from linear loss of -

Read More »

Microcontrollers feature sensorless motor control technology.

With InstaSPIN-FOC technology embedded in read-only-memory, C2000™ Piccolo™ F2802x MCUs can accelerate motor control development while optimizing efficiency of BLDC, PMSM, and AC induction motor-based applications. Housed in 48-pin package with 32 or 64 KB of Flash, microcontrollers can identify, tune, and control any type of 3-phase, synchronous or asynchronous motor. Typical applications...

Read More »

Wi-Fi/ZigBee IP SoC broadens design options.

Single-chip GS2000 enables device and appliance manufacturers to- develop- designs that support ZigBee IP and/or Wi-Fi, with IPv4 or IPv6, in same product. Bringing together- Wi-Fi-® (802.11b/g/n) and ZigBee IP (802.15.4), SoC offers multi Mbps throughput for HD video and audio applications. Idle power consumption and wake up performance from idle state extend battery life, while receiver...

Read More »

System Timers cut standby power consumption.

Drawing only 30 nA of current, Model TPL5000 with watchdog timer and Model TPL5100 with MOS driver replace microcontroller's internal timer, allowing MCU to remain in low-power sleep mode. TPL5000's selectable timing delay can be set from 1–64 sec to further extend battery life in applications such as smoke detectors. It can also be programmed for 16- to 1,024-sec intervals in energy...

Read More »

All Topics