Ceramics

Ceramics

XY Nanopositioning Piezo Stage provides sub-nm resolution.

With footprint less than 3 x 3 in.,Â- Model P-763 provides 30 x 30 mm aperture and travel range of 200 x 200 microns. Flexure-guided positioning system is equipped with capacitive, direct-metrology position sensors and ceramic-insulated piezo actuator technology. With capacitive feedback, linearity of motion is optimal, with 0.02% deviation from perfect straight line. Stage is suited...

Read More »
Ceramics

Professional Plastics Signs Master Distributor Agreement with Corning Macor®

Orchard Park, NY — Professional Plastics, Inc. has recently signed a Master Distribution Agreement with Corning, Inc. for the distribution and fabrication of Macor® Machinable Glass Ceramic parts and shapes.Â- Ã‚ Â  As a leading supplier of engineering plastics and ceramics with 18 locations in the USA, Singapore and Taiwan, Professional Plastics, will fill a key role in...

Read More »
Thermally Conductive Epoxy serves applications up to 572°F.
Potting Services

Thermally Conductive Epoxy serves applications up to 572°F.

Used for bonding, potting, tooling, and molding, Aremco-Bond™ 805 adheres to high-temperature plastics, glass, ceramic, and high-expansion metals. This 2-component, 100% solids, aluminum-filled epoxy cures at room temperature in 24 hr withÂ- final cure at 200°F in 2 hr. Cured material exhibits thermal conductivity of 12.5 Btu-in/hr-ft²-°F and dielectric strength...

Read More »
Championship Bout Held at ICI Expo: Alumina vs. Fused Silica
Alumina (Aluminum Oxide)

Championship Bout Held at ICI Expo: Alumina vs. Fused Silica

PECATONICA, IL – Which of Ipsen's special formulas do you prefer – the refractory body of Alumina that can withstand exceptionally high temperatures and reduces cracking during thermal cycling or the flexible, clay-bonded body of Fused Silica which provides more thermal shock resistance? Ipsen engineers developed both formulas over several years to be long-lasting, handcrafted and...

Read More »
Ceramics

Production Process offers PU encapsulated ceramic wear parts.

Allowing for complete production of urethane encapsulated ceramic shapes, Verkapse™ process can deliver complete assemblies within weeks. Blasch engineers can use any available wear materials, including Oxytron®, Nitron®, Altron®, and Invincer by Blasch RB®, and mold mounting features in urethane, such as flanges. Proprietary silicon carbide based materials can be cast...

Read More »
Machining Equipment

CTI-X7 Ceramic Process Equipment

Cedar Bluff, VAÂ- – Ceramic Technology, Inc. recently exhibited their Redesigned HM Cyclones at the Coal Prep Show in Lexington KY. This technology improves wear relating to impact abrasion on the center line of the inlet head. By fabricating the cyclone out of ¼ Carbon Steel and lining with 2" and 1½" Engineered Alumina Ceramic, the improved design supports rapid...

Read More »
Magnesium Oxide Ceramics withstand temperatures up to 4,000°F.
Magnesia (Magnesium Oxide)

Magnesium Oxide Ceramics withstand temperatures up to 4,000°F.

Super-Heat ™ 502-676 Magnesium Oxide Ceramic Crucibles are manufactured with full-fired, 99% pure material used in processing high-temperature refractory metals, slags, and superconductor compounds. Products feature high-density, fine-grain microstructure with open porosity of less than 1% and average density of 3.45 g/cc. They are available in stock and custom shapes with up to 7 in. dia, 12...

Read More »
Ceramic Resonator VCO targets backhaul radio market.
Oscillators

Ceramic Resonator VCO targets backhaul radio market.

Operating from 4,384–4,386 MHz with tuning voltage range of 1–4 Vdc, Model CRO4385A-LF features phase noise of -108 dBc/Hz at 10 kHz offset with typical tuning sensitivity of 15 MHz/V. Device delivers typical output power of 3 dBm at 5 Vdc supply while drawing 21 mA over temperature range of -40 to 85°C. Housed in 0.5 x 0.5 x 0.22 in. MINI-16 package, voltage controlled oscillator...

Read More »
Ceramic Substrates support SMT soldering and die attach.
Substrates

Ceramic Substrates support SMT soldering and die attach.

Consisting of electroless nickel and immersion gold plating over thick film silver, AgENIG® Substrates eliminate solder leaching, enable processing up to 260°C or higher, assure optimal solder connections, and allow multiple SMT reflow solder cycles as well as touch-up and repairs. Addition of thin layer of Palladium plating also allows welding, gold wire bonding, and eutectic die...

Read More »
Transparent PERLUCOR Advanced Ceramics
Ceramics

Transparent PERLUCOR Advanced Ceramics

CeramTec GmbH has succeeded in becoming Europe's first company to manufacture highly transparent and extremely durable ceramics on a series-production scale and to transfer the advantages of ceramics to a transparent material. The result of this development is PERLUCOR: a mechanically, chemically, thermally and optically perfected solution for transparent applications in extreme conditions. In...

Read More »
Solder Redefined
Sponsored

Solder Redefined

Indium Corporation has developed a new twist on traditional solder by developing a composite with a reinforced matrix internal structure. The result is a solder with increased strength and reliability. Check out this video to learn more about the mechanics behind the groundbreaking technology.

Read More »

All Topics