New Breakers Products

Electric Breaker features fatigue-reducing design.

Designed for wall or floor applications, TE 706-AVR Breaker incorporates brushless SR-motor, active vibration reduction system, and 3-level hammering power regulation. Control electronics provide continuous motor power, even during voltage fluctuations, and air flows over areas of motor, electronics, and hammering mechanism to keep tool and casing cool. Self-sharpening polygon chisels are offered...

Circuit Breaker exceeds mil spec life-cycle requirements.

Suited for military and aerospace applications, single-pole, remote-controlled Model RCCB 4930 is temperature-compensated and available in various current ratings from 5-100 A, AC 115 V/400 Hz and 28 Vdc. Unit exceeds MIL-PRF-83383 life-cycle specification of 50,000 actuations for inductive and resistive loads. Signal and control circuit is actuated by bi-stable liner motor, controlled through...

Circuit Breakers are unaffected by temperature.

Hydraulic/Magnetic circuit breakers do not rely on change in temperature caused by increased current flow to activate trip mechanism. Unaffected by ambient temperature and sympathetic heating, products do not derate or deteriorate over time and can be used in any application from -40 to +140Ã-

Circuit Breaker detects all types of fault currents.

Universal current-sensitive Type B residual current circuit breaker detects pulsating and smooth dc fault currents as well as sinusoidal ac fault currents. In detection, analysis, and shutdown, device offers protection via included line voltage-independent tripping function. Designed for currents from 25-80 A, devices handle tripping conditions up to 2 kHz and have rated fault currents 30, 300,...

Embedded Systems and Security: Security-First Mindset Drives Both Performance and Profits

To learn more about developing a long term strategy for protecting your systems, download now.

Miniature Circuit-Breakers meet requirements for UL 489.

Comprised of 62 devices, single-pole 5SJ4 series has installation depth of 70 mm and terminals designed for field wiring class. Products, designed for rated voltage of 240 Vac and 60 Vdc, meet requirements of EN/IEC 60 898. Rated switching capacity is specified up to 15 kA for 240 Vac and 10 kA uniformly for 60 Vdc. Suited for protection tasks within ANSI guidelines, devices can be used in...

Electronic Circuit Breaker suits low-voltage applications.

Manufactured in plastic, 12-lead, 3 x 2 mm DFN package, No RSENSE LTC4213 senses load currents with RDS(ON) of external MOSFET, eliminating need for sense resistor. Product operates over bias supply range of 2.3-6 V and monitors voltages from ground to 6 V. With pin-selectable VDS thresholds of 25, 50, and 100 mV, circuit breaker provides dual level and dual response time functions for...

Lump Breaker integrates into bulk bag discharger.

Lump Breaker has dual 1 in. diameter, counter-rotating shafts with eccentric rotor blades running between companion stators. Design of rotating shafts facilitates cleaning, and tools are required for assembly and disassembly. Unit integrates into bulk bag discharger to reduce material lump sizes down to pneumatically conveyable size. Maximum discharge particle size is 3/8 in.

Vacuum Reclosers offer direct SEL 351R compatibility.

Three-phase TriMod(TM) 300R Series requires only one control cable for full functionality and provides twice the duty cycle required by ANSI C.37.60. Solid-dielectric insulation system minimizes environmental problems associated with typical oil and gas insulation. Removable current transformers are surrounded by grounded metal surface, providing added personnel and equipment safety. Operating...

Fuseholder Style Circuit Breaker is RoHS-compliant.

Offered in push-to-reset configuration, lead-free T9 Series is designed with fuseholder body style and snap-in mounting (5/8 in. or 16 mm dia hole). Tripping operation is (cycling) trip-free, and terminals are Ã-¼ in. or 6.3 mm quick-disconnect. Suited for use on equipment, product is rated for currents range of 5-16 A and is cURus approved at AC240V/DC48V for 5-8 A as well as AC240V/DC32V...

Ignition-Proof Circuit Breaker complies with UL 1500.

Offered in Push-to-Reset and Automatic Reset configurations, Series 18 has weatherproof, trip-free design. It features Short Circuit Interruption up to 3,000 A and is available in ratings of 2-60 A with voltage ratings of 32 Vdc/120 Vac. Series is validated to requirements of Society of Automotive engineers (SAE), Underwriters Laboratories (UL), American Boat and Yacht Council (ABYC), and US...

Simple Connection � MGB with EtherNet/IP

The new MGB with EtherNet/IP is a leap forward in access door safety. Designed for easy installation, flawless performance, and long service life, it is engineered with robust features and cutting-edge technology that places it firmly at the leading edge of the door safety device industry. To learn all about the benefits of the Euchner MGB, see our video.