Circular Cold Saw efficiently cuts large materials.
Stationary Circular Saws

Circular Cold Saw efficiently cuts large materials.

Model HCS 150 Behringer Eisele Automatic Carbide Circular Cold Saw is designed specifically to cut materials up to 5.9 in. in dia for solid rounds and squares up to 5.3 in. in size. System cuts ferrous metals at 90° with carbide-tipped saw blades ranging from 14.1-18.1 in. in diameter. Controlled by PLC, unit can store numerically controlled program applications such as number of pieces to...

Read More »
Saw Blade offers optimized cross-cutting capability.
Saw Blades

Saw Blade offers optimized cross-cutting capability.

Suited for table, panel, and circular saws, 1048 Woodworker II features 48 teeth, 20° face hook, and 25° bevel, making it suited for cross-cutting everything from soft woods to plywood veneers. Sharp points allow blade to cleanly slice through wood fibers as it cuts across grain and to operate quietly with minimized vibration. Available in 10 in. diameter with 1/8 in. kerf, and 5/8...

Read More »
Doctor Blades come in straight and beveled configurations.
Miscellaneous Blades

Doctor Blades come in straight and beveled configurations.

Available in 7 wear-resistant materials, ProEdge(TM) Doctor Blades feature application-specific bevels and profiles for precise cleaning and metering performance. With standard bevels ranging from 22-45°, blades can be applied to flexographic and offset printing used in variety of industrial processing applications, including corrugating, converting, envelope, newspaper, and flexible...

Read More »
Carbide Tipped Band Saw Blades handle difficult materials.
Miscellaneous Blades

Carbide Tipped Band Saw Blades handle difficult materials.

Along with carbide-to-back bonding, Advanz(TM) blades feature tooth tip cylinder of sub-micron grain carbide with triple-chip grind welded to ductile back. FS and TS configurations are specifically suited for working with different difficult to cut/machine materials, and both exhibit fatigue-, shock-, wear-, and strip-resistance when cutting difficult-to-machine materials. Thicknesses are...

Read More »
Kalamazoo Industries Model KM14SC Mitre Saw Designed for Precise Dry Cutting
Saw Blades

Kalamazoo Industries Model KM14SC Mitre Saw Designed for Precise Dry Cutting

The Kalamazoo Industries Model KM14SC mitre saw uses a 14-inch carbide tipped blade to produce clean cuts without burrs or heat generation. This enables precise dry cutting of thin wall mild steel and aluminum, as well as 1/4-inch angle, pipe and structural steel. The KM14SC saw features heavy cast iron construction, a 1300 rpm spindle speed, 1-inch arbor, sealed ball bearings, dual V-belt drive,...

Read More »
Tubes and Tubing

Bayer MaterialScience Selected to Receive Department of Energy Grant to Support Wind Turbine Blade Research and Testing Using Carbon Nanotube Technology

Pittsburgh, July 30, 2009 - Bayer MaterialScience LLC was selected to receive a $750,000 grant from the U.S. Department of Energy (DOE) to support development and testing of advanced composite technologies and resin infusion processes for larger, more efficient and more powerful 1.5+ megawatt wind turbine blades. The project, "Carbon Nanotube Reinforced Polyurethane Composites for Wind Turbine...

Read More »
Automatic Saw is designed for high production rates.
Saw Blades

Automatic Saw is designed for high production rates.

Model CT 350 A-NC is fully automatic high-speed circular saw suitable for use on aluminum extrusions, small aluminum solids, and other nonferrous materials. Utilizing 14 in. carbide-tipped sawblade and spray mist coolant, it can yield 50 rms quality cuts at 90°, or 45° left and right, with accuracy of ±0.005 in. Saw features twin pneumatic vises with infinitely variable clamping...

Read More »
Snow Blades feature 5° lateral oscillation.
Miscellaneous Blades

Snow Blades feature 5° lateral oscillation.

Designed for SBS-27108A skid steers and SBFL-2780A front loaders, 9 ft Worksaver® Snow Blades provide snow removal in driveways, parking lots, or other large areas. Reinforced 27 in. moldboard with 3/8 x 6 in. cutting edge of 1044 steel fully angles right or left. Other standard features include extension trip springs for controlled break over in snow, and adjustable depth skid shoes that...

Read More »
Carbide Tipped Band Saw Blades cut difficult materials.
Miscellaneous Blades

Carbide Tipped Band Saw Blades cut difficult materials.

Available in FS and TS configurations, Advanz(TM) blades feature tooth tip cylinder of sub-micron grain carbide with triple-chip grind welded to ductile back. They offer optimal carbide-to-back bonding and exhibit resistance to fatigue, shock, wear, and stripping when cutting difficult-to-machine materials. Thicknesses range from Â-¾ x .035 in. to 3 1/8 x .063 in., and lengths include 100...

Read More »
Miscellaneous Blades

Aviation Supplier Turns to Marlin Steel Wire Products for Quick Solution

GKN Aerospace Needed a Way to Transport Turbine Blades When GKN Aerospace, a leading supplier to the aviation industry, needed a means to transport turbine blades, Marlin Steel Wire Products (www.MarlinWire.com ) of Baltimore came up with a quick solution. Marlin engineered baskets from stainless steel with separate compartments to contain 25 blades. But the baskets had to do more than carry up...

Read More »

All Topics