MILLHOG® Cutter Blades come with radical chip breaker.
Esco MILLHOG® Cutter Blades are available in 37-1/2° and 30° standard O.D. angles and are made from T-15 tool steel with TiN or hard lube coating. These blades are used for beveling pipe O.D., flat face, and bore the I.D. simultaneously. Units are suitable for heavy-wall pipes made of Super Duplex stainless steel or P-91 alloys and come with EscoLock™ wedge-style rigid blade lock system.
Read More »
Impeller Blade is made of aluminum C355 material.
Impeller Blade is suitable for axial fans and weighs 47 lbs. Unit comes in a length of 32.5 in. and is suitable for underground and above-ground mining and power industry applications.
Read More »
Dehider Blades feature a v-tooth design.
Dehider Blades come in an outer diameter of 4.3 in./110 mm and are equipped with bushings for mounting. Made of high-quality steel, these units allow users to reduce waste and deliver the possible hide quality from beef, hogs or sheep carcasses. Products are suitable for food processing industry applications and are manufactured to the exact tolerances under ISO 9001:2015 factory conditions.
Read More »
Parting-Off Blades feature adjustable edge heights.
Designed to fit VDI Turrets, 150.10 JETI Family Parting-Off Blades with VDI block design offer streamlined delivery of high-pressure coolant to cutting zones. Combination of blades and adapters is used for removing heat during parting-off operations, unit’s coolant holes allows the transfer of coolant to cutting zone via turret. HSS parting off blades are available in 20 mm and 25 mm size.
Read More »
Hot Forging Process
Check out this white paper to learn about the benefits of hot forging.
Read More »
QUAD 7 Blades feature positive rake angle four-tooth pattern.
Available in ¾ in. x .050, 1-1/2 in. x .050, 2 in. x .062, 2-5/8 in. x .062 and 3-1/8 in. x .062 widths, QUAD 7™ Carbide Tipped Blades are ideal for high chrome alloy, inconel and nickel-based alloys, titanium block and stainless steels. Designed with tooth pitch of 2.5 – 3.5, 2-3, 1.9-2.1, 1.4-1.8, 1.1-1.4, and .9-1.1 teeth per inch, units come with plastic capping. Blades are used in steel...
Read More »
CWT Band Saw Blades come with plastic capping.
Suitable for aluminum block, aluminum gates and risers, aluminum automation, Inconel and nickel-based alloys, CWT Carbide Tipped Band Saw Blades are designed in three-tooth set pattern with positive rake geometry. Available in 1-1/4 in. x .042, 1-1/2 in. x .050, 2 in. x .062, 2-5/8 in. x .062 and 3-1/8 in. x .062 widths, and variable tooth pitch of 2-3, 1.9-2.1, 1.4-1.8 and .9-1.1 teeth per in....
Read More »
Now Available at PipeManProducts.com - Mighty Deep™ Bi Metal and Carbide Hole Saws
Concord, CA February 23, 2017 - PipeManProducts.com has just received in our biggest inventory stock with new sizes of our affordable Mighty Deep™ Extra Deep Bi Metal and Carbide Hole Saws. PipeManProducts.com saw a need in the hole saw industry for an affordable extra deep hole saw solution. Most hole saw manufacturers have normally offered a 1-7/8” drill depth for Bi Metal hole saws and a...
Read More »
G1041 Parting Blades feature Secure Torx Plus screw clampings.
Featuring PVD AL2O3 coating on the inserts, G1041 Parting Blades provides coolant supply through clamping block. Enhancing chip control and quality surface finishing, G1041 blades are 26/32 mm sized and tool's GX-style inserts are securely clamped in pocket. Providing 65 mm diameter parting off with 16-32 mm grooving depth and 2-4 mm cutting width, units are used in bar feeder, turret...
Read More »ƐPS™ Fan Blade Extensions are chemical resistance tested.
Suitable for use in HVAC, ƐPS™ Fan Blade Extensions are compatible with all Multi-wing fans. With operating temperatures up to 280°F (120°C), extension can withstand loads of more than 1016 N/in. (40 N/mm). Tested for maximum durability in tough off-road applications, ƐPS increases efficiency up to eight percentage points and pressure up to 25 percent. Minimizing turbulence in blade, unit...
Read More »Aerodynamic Blade Add-On reduces wind turbine noise.
DinoTail Next Generation, inspired by an owl wing's trailing edge fringe, optimizes aeroacoustic performance of wind turbine rotor blades without negatively affecting annual energy production. In addition to vortex generators on blade surface, trailing edges have serrations and combs. Combed teeth concept creates fine vortices where fast air stream from above blade profile meets slower...
Read More »
Dies & Stamping Services with Over 25 Years of Experience
PDS is an established leader in progressive die stamping, with a reputation for providing precision and value that dates back more than half a century. Through extensive capabilities and a staff of seasoned professionals, we set the standard for quality, delivering flexible services that can meet the needs of the most challenging requirements. See our video to learn more.
Read More »
