Miniature Ball Valve is pressure rated at 2500 psig CWP.
Bi-directional flow Series MB8 has one-piece seat/packing design and stainless steel body with 2-way inline and 3-way configuration. Valve has positive handle stops and is panel mountable. Port connections are FNPT, CPI(TM) single-ferrule or A-LOKÃ-® double-ferrule systems. Operating temperature range is -65 to 300Ã-
Read More »
Ball Valves suit HVAC and OEM applications.
Series BV2L two-piece, electric actuated ball valves are made from 316 stainless steel and TeflonÃ-® for corrosion resistance. They offer bubble tight shutoff to 1,000 psi and temperature range from -20 to +450Ã-
Read More »
Ball Valve is suitable for clean applications.
Model BA350TE 3-piece, bronze-body, full-port ball valve has 6 in. copper tube extensions brazed to each tailpiece. Available in sizes from 1/2 to 2 in., valve is offered with straight male tube-end, female expanded ends, or combination of male and female ends. Offerings include reinforced PTFE seats and packing, blowout-proof stem, and chrome-plated brass ball. Valve is suited for applications...
Read More »
Valves offer temperature-resistant seats.
Xtreme(TM) soft-seat technology is available on Jamesbury ANSI Class 150 and 300 ball valves up to 12 in. and butterfly valves up to 24 in. It is based on flexible-lip seat design using polymer formulation, which increases wear resistance and resistance to permanent deflection. Seats also lower operating torque requirements. Permanent deflection of seat material is virtually linear from 100 to...
Read More »
Your Complete Guide to Understanding & Selecting the Right Heat Recovery System
Learn about the important qualities of heat recovery systems.
Read More »
Fail-Safe Ball Valves are constructed of Corzan-® CPVC.
Air-actuated valves are used for on/off service and automatically close when power failures occur. Available in 1/2 through 2 in. sizes with various connection types, valves have pneumatically powered fail-safe actuators constructed of corrosion-resistant plastics. Suited for use in applications that require elevated temperatures and corrosion resistance of Corzan, valves are available with...
Read More »
Port Ball Valves have grooved ends.
Series 726 (ductile iron) and Series 726S (CF8M stainless steel) 2-piece, end-entry valves have floating balls for lower torque requirements. NACE compliant, valves have maximum working pressures rated to 1,000 psi for 1Ã-½ to 3 in. and 800 psi for 4 and 6 in. sizes. Chrome-plated carbon steel ball and stem are connected to virgin TFE seat (Series 726); 316 stainless stem and ball are...
Read More »
Three-Way Ball Valve suits dual safety relief systems.
Offered with full flow manifold ends, Figure 780 Diverter Valve is O2 cleaned for oxygen service. Valve's stainless steel handles indicate flow direction with full 180Ã-
Read More »
Ball Valves are rated to 6000 psi.
Series 500HP/506HP Carbon Steel Ball Valves are offered in sizes from Ã-¼ through 2 in. with working temperature of 0 to 150Ã-
Read More »
Ball Valves are offered in 1/2 through 2 in. sizes.
Series 509 Solder End Ball Valves are designed to be soft soldered into ASTM B88 copper lines without disassembly or disturbing seats and seals. Working temperature is 100 to 250Ã-
Read More »
Ball Valve provides process control.
OBV is a 1000 psi W.O.G full-port, 3-piece process control valve made from 316 stainless steel. Manufactured of ASTM-A351-CF8m body, ball and cap, valve is available with or without locking handles in 1/4 through 1 in. NPT. Thrust washers and packaging are PTFE.
Read More »
Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life
For the ultimate in heat transfer fluid performance, Paratherm offers HR Heat Transfer Fluid that is engineered specifically for closed loop liquid phase heating. When it comes to characteristics such as thermal stability and fluid degradation, Paratherm HR leads the industry in value and performance. See our video to learn how Paratherm is raising the bar for heat transfer fluids.
Read More »
