Operational Amplifier drives wide variety of loads.
Operating from single or dual supplies, Model OPA567 has rail-to-rail swing on input and output. Output swing is within 300 mV of supply rails with output current of 2 A. Diagnostic flag is provided for temperature overstress and can be configured to provide thermal shutdown. Housed in 5 x 5 mm QFN package, op amp is suited for driving valves, actuators, laser diode pumps, and servo motors, as...
Read More »Transmitter features 10 Vdc analog output.
Operating from -10 to +40Ã-¡Ãâ C at up to 95% RH, AST3IS isolation amplifier is designed for use with strain-gage transducers in hazardous areas without Zener barriers. DIN-rail mount unit has ADC capable of up to 8,300,000 counts. With built-in support for RS-485 and MODBUS RTU, transmitter can communicate with process control host without external hardware or additional software....
Read More »Amplifier assists hearing aid users.
EVAC-compliant Plena Loop Amplifier allows hearing-aid users in public buildings to clearly hear announcements, music, or soundtracks. Unit integrates into new or existing sound systems in public areas up to 600 sq meters. Master/slave configuration supports low spillover and quadrature system design, providing standard solution for multiple room applications. Amplifier includes automatic gain...
Read More »
Does an IT MSP Really Add Value to a Manufacturing Environment?
To find out more about how IT managed service providers can specifically help your manufacturing company, download now.
Read More »UHF Pallet Amplifiers target broadcast applications.
Suited for digital and analog broadcast applications, Model LDU401C provides 350 W at 1 dBcp and 90 Wrms, while Model LDU501C deliverws 450 W at 1 dBcp and 120 Wrms. Typical gain is 15 dB for Model LDU401C and 18 dB for LDU501C. Both are equipped with Motorola RF power devices.
Read More »WLAN Power Amplifier includes power detector.
Supporting 2.4 GHz 802.11 b/g and 5 GHz 802.11a standards, dual-band Model SST13LP02 provides 20 dBm for 802.11b, 18 dBm for 802.11g, and 18 dBm for 802.11a applications. Integrated, temperature-stable, on-chip power detector tolerates output mismatch of VSWR greater than 2:1 at all angles. On-off switching is controllable by baseband chip with minimum reference current of ~2 mA. Applications...
Read More »
Operational Amplifiers suit low-power video applications.
NCS25xx family of 200 MHz devices allow video designers to achieve 0.02% differential gain and 0.1Ã-
Read More »
Op-Amps draw 1.1 mA of supply current.
Suited for 16- and 18-bit portable instruments, ADA4841-x family of single and dual devices achieve 2 nV/rt-Hz wideband voltage noise and 1.4 pA/rt-Hz wideband current noise. To maintain low-noise environment at lower frequencies, amps have 1/f noise of 6 nV/rt-Hz and 13 pA/rt-Hz @ 10 Hz. Devices also achieve low distortion, with 111 dBc spurious free dynamic range @ 100 kHz. Uits feature...
Read More »
Low Noise Amp maintains linearity over wide bandwidth.
With typical gain of 20 dB, HILNAV1 low noise amplifier operates in usable frequency range of 50 MHz to 1.5 GHz. Input to device is 5-30 Vdc with internal regulator. Featuring reverse voltage protection, design achieves typical third intercept point of +32 dBm. Product is housed in extruded aluminum enclosure and offers option for mounting flanges. It is also available in OEM sub-assembly version...
Read More »
Op-Amps offer low noise and power consumption rate.
Offered in 3 versions, op-amps utilize BiCMOS technology and current-feedback architecture. Model TSH310 requires 400 Ã-µA quiescent current and achieves 130 MHz bandwidth and 115 V/Ã-µsec slew rate. Input noise is 7.5 nv/√Hz typ. With noise as low as 1.3 nV/√Hz, TSH330 provides up to 1.1 GHz bandwidth, 1,800 V/Ã-µsec slew rate and 16 mA quiescent current. Model TSH350, with 410...
Read More »
Don't Let Your Money Drain Down the Hole...Drill Steel with Euroboor
As a globally recognized manufacturer of industrial grade portable tools, Euroboor is at the forefront of drilling and cutting technology. Our reputation as an industry leader is built on robust products that fit a wide range of industrial cutting and drilling applications. See our video to learn more about all of our quality products.
Read More »
