Multi-MIG Welding Inverters monitor arc conditions.
Software-driven, Axcess(TM) 675 provides output of 675 A/44 V at 100% duty cycle, making it suited for large welds requiring long cycle times. Voltage range in CV mode is 10-44 V with 80 Vdc max open circuit voltage. Auto-Line technology enables machine to accept any primary power from 190-630 V, single- or 3-phase, 50 or 60 Hz. Auto-Axcess 675 offers same features but communicates through...Read More »
Power and Output Converter works with dc sensors.
Python Power(TM) allows dc sensor to be installed in locations where only ac power is available and maximizes installation efficiency. It consists of universal in-line ac/dc power supply and TRIAC output switch, which is controlled by sensor's low-voltage output and automatically detects sinking or sourcing output. Design accepts universal input voltages from 85-265 Vac and can be pulled through...Read More »
Multiprocess Inverter utilizes Auto-Line(TM) technology.
Weighing 80 lb, XMT-® 350 CC/CV inverter is designed for those who regularly perform Stick, TIG, pulsed TIG, MIG, pulsed MIG, flux cored, or air carbon arc cutting and gouging. It features Auto-Line(TM) primary power management technology, 5-425 A output, and duty cycle rating of 60% @ 350 A/34 V. Product has single selector switch for process selection, adjustable dig and inductance control,...Read More »
Inverter powers ac/dc submerged arc welding.
Rated at 1,000 A, Power Wave AC/DC 1000 inverter is capable of driving welding arcs singularly or in parallel. Each unit achieves 95% power factor with 86% efficiency and produces variable ac as well as straight dc+ or dc- output. Utilizing Nextweld(TM) Waveform Control Technology(TM), modular, software-controlled inverter is designed for use with digital communications. Its ac waveform operates...Read More »
The Ultimate Guide To Electro-Mechanical Assemblies & Box Builds
This ebook provides an in-depth guide to electro-mechanical assemblies and box builds.Read More »
Inverter Power Supplies provide portability.
Thermal Arc-® Next Generation Power Supplies are stackable units that range in weight from 19-63 lb. They include control panel covers to protect against elements, voltage reduction safety for STICK welding, and full digital controls. Units are suited for STICK, DC TIG, AC/DC TIG, and MIG applications.Read More »
Thermal Converters measure AC current/voltage up to 1 MHz.
Series EL-1000 Converters utilize single junction vacuum thermocouples, which use Evanohm heater wire and cold bead, eliminating Peltier and Seebeck effects. Platinum leads help lower AC/DC transfer errors and extend use of thermal converters above 100 MHz threshold.Read More »
Power Supply provides portable auxiliary power.
Ranger(TM) 3 Phase delivers up to 11,500 W peak, 10,500 W continuous 3-phase power for farm irrigation circles and pumps. It can also provide 10,500 W peak, 9,500 W continuous single phase power for back-up generators, plasma cutters, and inverter welders. At 100% duty cycle, power source is rated 225 A for AC, 210 A for DC, and 200 A for CV. Unit is powered by 20 hp, 2-cylinder, 4-cycle,...Read More »
Power Source powers stick and TIG welding.
Suited for construction site/outdoor use, Invertec V275-S is rated at up to 275 A to enable users to weld with up to 7/32 in. stick electrodes. Product employs weather-resistant features and meets IP23S environmental rating. Able to operate on input voltages from 208-575 Vac, single- or 3-phase power, unit does not require derating with single-phase input power. It offers Selectable Hot Start,...Read More »
AC/DC Power Supplies offer current sharing capabilities.
Equipped with power-good LED indicator and output adjustment potentiometer, PSP300 and PSP500 Series active power factor corrected enclosed switching power supplies provide output power over 300 and 500 W ranges, respectively. All models accept Universal Input from 85-265 Vac, and some models provide single outputs from 5-48 Vdc. Features include soft-start circuitry, integral EMI filtering,...Read More »
Switching Power Supply provides 18 kW in 3U size.
AC-to-DC Model HPS3KW is housed in 5.25 in. bulk front end. Modules deliver 3000 W of output power at 85% efficiency and 19 in. rack can be configured with up to 6 devices for total of 18,000 W of power in less than 2,400 cu in. Single-output devices provide 48 Vdc output at 57 A. Modules accept ac input from 180 to 264 Vac and feature active power factor correction greater than 0.98 to meet...Read More »
Triad's JSU Series of Power Supplies Provide Robust, Low Cost Solutions
Triad Magnetics is an established leader in power supply innovation, offering product lines that span a wide range of diverse industries and applications. Adding to their long list of successful product launches, Triad announces the release of the new cutting-edge JSU Series of power supplies. To learn about all of its advantages and advanced features, see our video.Read More »