AC to DC Power Supplies

AC to DC Power Supplies

Welding Power Supply has spool gun ready capabilities.

Power MIG® 255C features Diamond Core Technology(TM) for minimal spatter. Spool gun ready capabilities include built-in electronics to drive Prince® XL or Magnum® SG spool gun for aluminum welding and second gas solenoid to facilitate spool gun connection. Offering continuous control over amperage range of 30-300 A, rated output is 250 A @ 40% duty cycle. Unit has 115 V...

Read More »
Distributed Power Systems have high-density design.
AC to DC Power Supplies

Distributed Power Systems have high-density design.

Featuring active power factor correction, ac-dc distributed bulk power front-ends in DS Series accept ac input from 90-264 Vac and provide +12 Vdc main output and +3.3 Vdc standby output. Power supplies, available with power ratings of 450 and 550 W, have 1U x 2U profile and high-density (greater than 10 W/in.Â-³) design. Internally fan-cooled units feature full current-sharing capabilities,...

Read More »
AC/DC Front-End Power Supply produces 13 W/in.³.
AC to DC Power Supplies

AC/DC Front-End Power Supply produces 13 W/in.³.

Suited for equipment with distributed power architecture, DPS2000 adheres to SSI guidelines. Rated at 2,000 W, 48 V unit features active current sharing, hot-swap capabilities, N+1 redundancy, and I2C interface. Power-factor corrected unit meets EMI Class B regulations, measures 12.80 x 2.74 x 4.86 in., and is upgradeable via flash memory. With full load efficiency of 87%, it delivers 1,000 W at...

Read More »
Orbital Welding Power Supply uses inverter technology.
AC to DC Power Supplies

Orbital Welding Power Supply uses inverter technology.

Compact, water-cooled ORBIMAT 165C can be used to control welding heads that are capable of cutting 3-275 mm OD tubes, pipes, and fittings. Full package, consisting of controller, power supply, and cooling unit, weighs 24 kg with full coolant level. Inverter technology throughout machine enables it to work with any input voltage from 80-260 Vdc, while Compact Flash port on front panel allows...

Read More »
Distillation 101: A Guide to Distillation and Separation Technologies
Sponsored

Distillation 101: A Guide to Distillation and Separation Technologies

Distillation is a separation unit operation that involves multiple countercurrent-stage steps, separating two or more volatile components. This results in the contact of liquid and vapor most generally in counterflow. Distillation 101: A Guide to Distillation and Separation Technologies provides an in-depth look at everything you need to know about distillation, including: Design procedures Equipment components Applications

Read More »
AC to DC Power Supplies

MIG Welder features multi-voltage power cord.

Able to connect to 115 and 230 V power receptacles, Millermatic® DVI (Dual Voltage Input) MIG welding power source has 30-175 A operating range. It outputs 90 A @ 20% duty cycle while operating on 115 V and 150 A @ 40% while operating on 230 V. Unit utilizes dual-gear-driven, cast aluminum drive system and comes with power source, M-10 gun and cable assembly, 10 ft work cable and clamp, dual...

Read More »
AC to DC Power Supplies

Switching AC/DC Power Supply generates nominal 60 W.

Industrial grade, 1U MPI-806H generates 80 watts with 8.6 cfm forced air, offers remote ON/OFF function, and is fully protected against output overload and short circuit. Able to automatically recover upon overload condition, unit has MTBF of greater than 130,000 hr. Power supply, which is suited for embedded system and mini ATX motherboard applications, also provides ATX output option and...

Read More »
AC/DC, TIG/Stick Power Sources have integrated cooler.
AC to DC Power Supplies

AC/DC, TIG/Stick Power Sources have integrated cooler.

To prevent torch damage by monitoring coolant flow and temperature, Syncrowave® 250 DX and 350 LX incorporate Cool-On-Demand(TM) feature. Syncro-Start(TM) technology provides choice of 3 starting conditions to optimize starts to match tungsten diameter and material thickness. Power sources, with welding ranges of 3-310 A and 3-400 A, also incorporate built-in consumables storage drawer,...

Read More »
AC/DC Welder offers 250 A output.
AC to DC Power Supplies

AC/DC Welder offers 250 A output.

Ranger(TM) GXT provides AC/DC welder mated with AC auxiliary power generator that offers 11,000 W peak and 10,000 W continuous power. Unit includes remote control receptacle, full-KVA 120/240 V outlet, and four 120 V outlets. Fully enclosed case protects Kohler® 20 HP OHV gasoline engine, and operators can simultaneously weld and use AC generator power. It handles Stick, TIG, MIG, and...

Read More »
Orbital Welding Power Supply suits cleanroom applications.
AC to DC Power Supplies

Orbital Welding Power Supply suits cleanroom applications.

Rated at 160 A, ORBIMAT 160CR features anodized aluminum panels, which eliminate risk of shedding from painted panels, keeping contamination to minimum. It includes automatic welding parameter generation facility and is capable of holding 2,000 four-level welding procedures. Each procedure incorporates Application Specification section that allows for storage of details of gas types and flow...

Read More »
Welding Power Supply welds aluminum components.
AC to DC Power Supplies

Welding Power Supply welds aluminum components.

Orbimat 300 AC welds with either ac or dc, allowing orbital technique to be used for welding aluminum parts. Since ac balance and frequency can be controlled, operator can manipulate weld bead profile to suit application. Power supply works with any weld head from Orbimatic range, providing capabilities from 1.66 mm to 10 in. OD.

Read More »
Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)
Sponsored

Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)

Fiber Reinforced Polymers (FRP), represents a truly groundbreaking advancement in structural reinforcement. Lightweight, strong, and green, they are changing the way the construction industry thinks about rebar. Unlike steel, FRPs don't rust and are far stronger than standard rebar. To learn why Fiber Reinforced Polymers are poised to change the way the world builds, see our video.

Read More »

All Topics