AC to DC Power Supplies

Cover Kits are designed for AC-DC power supplies.
AC to DC Power Supplies

Cover Kits are designed for AC-DC power supplies.

Cover kits for Artesyn NLP250, Artesyn TLP150, and Astec LPS120 series simplify mechanical integration of power supplies into systems and add extra measure of electrical safety for service personnel. Available as separate add-on accessories, kits feature robust, ventilated enclosures and are supplied with all necessary insulating plates, mounting brackets, and screws. They add minimal height to...

Read More »
Welding Inverters promote defect-free results.
AC to DC Power Supplies

Welding Inverters promote defect-free results.

Suited for use in mash seam welding applications, 2 high-power WeldVerter(TM) Power Supplies feature WeldComputer® Adaptive Weld Controls. Each inverter can deliver up to 800 A continuous welding current at 1 kHz frequency and is able to operate in current, voltage, and power feedback modes. Monitoring all key welding parameters, system detects variations in process that could negatively...

Read More »
AC to DC Power Supplies

BEAR Power Supplies Awarded Patent for Encapsulated, PCB-Mountable AC/DC Converter with Detachable AC Line Cord

Unique design eliminates exposed high-voltage traces on system boards; provides long life over wide temperature range for commercial, industrial and medical applications September 4, 2007 - Phelps, NY - BEAR Power Supplies, Inc. (www.bearpwr.com) has been issued a US patent for its encapsulated PCB-mountable AC/DC power converter with detachable AC line cord, the company announced today. US...

Read More »
AC to DC Power Supplies

Power Supplies feature industrial and medical approvals.

Measuring 4.5 x 2.5 x 1.2 in., ECM100 Series 100 W AC/DC Power Supplies offer dual, triple, and quad output variants with power density of 7.4 W/cu-in. Two independent converters provide fully regulated auxiliary outputs. Outputs V1 and V2 are regulated by control loop, while V3 and V4 are post regulated. Suited for limited space applications, open frame power supplies provide full power with 5...

Read More »
AC to DC Power Supplies

AC-DC Front Ends provide up to 80 A on single output.

Designed for applications requiring several high-current rails, 600 W Series HP600 is available with up to 5 outputs from 0.8-48 V, plus 5 V standby power source. Hot-swap units feature backplane-mounted AC connectors, 85-264 Vac input range with PFC, I2C interface, and ORing diodes to support paralleling and current sharing for up to 4 outputs. Housed in 1U high enclosure with 11.5 x 5 in....

Read More »
AC to DC Power Supplies

Mouser Electronics Dramatically Expands Linecard with the Addition of 31 Leading Suppliers in First Half 2007

Mansfield, Texas, USA - August 13, 2007 - Mouser Electronics, Inc., known for its rapid introduction of the newest products, today announced it has dramatically expanded its linecard by signing 31 additional electronic component suppliers in the first half of 2007. With an already extensive portfolio of products across the board, the additional suppliers bolster the product choices for Mouser's...

Read More »
AC/DC TIG Welders promote optimal low-end arc starts.
AC to DC Power Supplies

AC/DC TIG Welders promote optimal low-end arc starts.

Syncrowave® 250 DX and 350 LX feature low-end DC TIG arc starting capabilities that help prevent burn-through when welding thin metal. While use of 1/6 in. or smaller diameter tungsten electrode is recommended for low-amperage arc starts or welding thin materials, power source's arc starting circuit also provides positive arc starts with 3/32, 5/32, and 1/8 in. dia tungsten. Other features...

Read More »
Master Distributors Offers Triad Magnetics ALS And AWSP Series of Power Supplies
AC to DC Power Supplies

Master Distributors Offers Triad Magnetics ALS And AWSP Series of Power Supplies

Master Distributors, a leading distributor of electro-mechanical, interconnect and passive components, offers Triad Magnetics complete lines of ALS series and AWSP series of switching AC-DC power supplies. Ideal for all general purpose applications, the ALS and AWSP series provide an extremely cost-effective, durable and high quality solution. Master Distributors offers all of Triad Magnetics...

Read More »
AC to DC Power Supplies

AC/DC Power Supplies can be PCB- or chassis-mounted.

Comprised of 10 W (ECL10) and 15 W (ECL15) versions, ECL series is available in open frame PCB-mount, encapsulated PCB-mount, and open frame chassis-mount formats. ECL10 measures 1.0 x 2.0 x 0.9 in., offering 5.6 W/in.Â-³ power density. Both ECL10 and ECL15 offer single output voltages of 3.3, 5, 9, 12, 15, 24, and 48 Vdc. Full power is supplied across entire input voltage range of 85-264...

Read More »
AC to DC Power Supplies

DuraComm Takes Smart Charging, Battery Management and LED Power Supplies to All New Levels with Three New Product Series

North Kansas City, MO May 2, 2007 - DuraComm Corporation debuted several new products at the 2007 International Wireless Communications Expo (IWCE) in Las Vegas, Nevada last month. Each of the products was developed as a result of specific customer requests received for increasingly specialized applications. The PB-360 Series consists of high capacity, 3-stage smart chargers that provide for...

Read More »

All Topics