Druck, Inc.
New Fairfield, CT 06812
Share:
Pressure Sensors suit high-volume OEM applications.
Series 1500 Sensors yield inherently accurate pressure measurements up to 2000 psi via piezoresistive silicon technology and ASIC compensation. Static accuracy is better than Ã-
Read More »
Pressure Transmitter suits long-term, subsea use.
With all welded construction, PTX 300 Series is fully submersible with ambient pressure rating to 4,000 psi. Product utilizes micromachined piezo resistive silicon pressure measurement technology and is packaged to suit specific requirements of subsea hydraulic control systems. Series, offered with pressure ranges from 1,000-15,000 psi sealed gauge or absolute, offers better than 0.1% accuracy.
Read More »
Transmitter suits long term use in subsea locations.
Series PTX 400 enables temperature/pressure measurements to be made directly on subsea wellheads and production manifolds by utilizing micromachined piezo resistive silicon pressure measuring technology. Able to handle external pressure to 9,500 ftH2O, pressure ranges are available to 10,000 psi with proof pressure at 1.5 x FS range and secondary pressure containment in excess of 15,000 psi....
Read More »
Pressure Transmitter has modular design.
Series PTX 7900, for process applications, incorporates ASIC technology and surface-mounted electronics. User-adjustable zero/span controls are accessible via removable screwed-end cap. Series incorporates standardized core, which is available in operating pressures from 1-10,000 psi sealed gauge or absolute, with proportional 2-wire, 4-20 mA output. Accuracy is Ã-
Read More »
Pressure Transducers offer ranges from 5-1,000 psi.
Series DPS 4000 features digital CANbus serial communications interface. Fully temperature corrected pressure readings are output as digital word at up to 100 Hz in any one of 24 engineering units, requiring no user system set-up or calibration. Integral digital electronics provide 0.2% reading for values above 50% FS and 0.1% FS for readings below 50% FS. Transducers are fully input/output...
Read More »
Pressure Transducer provides analog and digital output.
Model PDCR 3500, 1 in. dia, fluid isolated, analog output device achieves total accuracy of better than Ã-
Read More »
Pneumatic Calibrators have built-in pressure source.
DPI 320/325 Series high pressure portable calibrators offer bottle source for dry pneumatic calibrations to 3000 psi. Combined with electrical source/measure and PC interface, instruments provide calibrations with 0.025% FS accuracy. Offerings include 122 in.Ã-³ capacity gas cylinder, precision regulator, and fine volume adjuster. Pressure ranges vary from 0-500 psi thru 0-3000 psi. DPI 325...
Read More »
Pressure Calibration System offers sensor-calibration module.
Sensor Calibration Module (SCM) enables users to source low voltage for transducer or transmitter excitation and read back mV, V, or mA output from sensor. Supplied pressure setpoint and electrical output are displayed on screen simultaneously. SCM can be retrofitted into company's DPI 515 calibration system and is accessed via 15-way, D-type connector. Multi-way connecting cable, terminated with...
Read More »
Liquid Level Meter offers accuracy to -
Suitable for industrial level measurements in liquid control applications, PDCR/PTX 1830 Series offers FS operating ranges from 1 to 900 psi with choice of electrical format. Its 4-wire transducer variant, PDCR 1830, offers FS scale signal of up to 100 mV, while transmitter variant, PTX 1830, is a standard 2-wire, 4 to 20 mA device. Its integral lightning surge arrestor protects against raised...
Read More »
Pressure Transmitters provide depth/level measurements.
PTX 1835 and 1235 submersible pressure transmitters are designed for use in groundwater, well water, canals, rivers, and other applications where possibility exists for lightning damage. Transmitters are constructed of all welded titanium and protected to IEC 61000-4-5, Level 4.
Read More »Pressure Sensors suit high-volume OEM applications.
Series 1500 Sensors yield inherently accurate pressure measurements up to 2000 psi via piezoresistive silicon technology and ASIC compensation. Static accuracy is better than Ã-
Read More »
Pressure Transmitter suits long-term, subsea use.
With all welded construction, PTX 300 Series is fully submersible with ambient pressure rating to 4,000 psi. Product utilizes micromachined piezo resistive silicon pressure measurement technology and is packaged to suit specific requirements of subsea hydraulic control systems. Series, offered with pressure ranges from 1,000-15,000 psi sealed gauge or absolute, offers better than 0.1% accuracy.
Read More »
Transmitter suits long term use in subsea locations.
Series PTX 400 enables temperature/pressure measurements to be made directly on subsea wellheads and production manifolds by utilizing micromachined piezo resistive silicon pressure measuring technology. Able to handle external pressure to 9,500 ftH2O, pressure ranges are available to 10,000 psi with proof pressure at 1.5 x FS range and secondary pressure containment in excess of 15,000 psi....
Read More »
Pressure Transmitter has modular design.
Series PTX 7900, for process applications, incorporates ASIC technology and surface-mounted electronics. User-adjustable zero/span controls are accessible via removable screwed-end cap. Series incorporates standardized core, which is available in operating pressures from 1-10,000 psi sealed gauge or absolute, with proportional 2-wire, 4-20 mA output. Accuracy is Ã-
Read More »
Pressure Transducers offer ranges from 5-1,000 psi.
Series DPS 4000 features digital CANbus serial communications interface. Fully temperature corrected pressure readings are output as digital word at up to 100 Hz in any one of 24 engineering units, requiring no user system set-up or calibration. Integral digital electronics provide 0.2% reading for values above 50% FS and 0.1% FS for readings below 50% FS. Transducers are fully input/output...
Read More »
Pressure Transducer provides analog and digital output.
Model PDCR 3500, 1 in. dia, fluid isolated, analog output device achieves total accuracy of better than Ã-
Read More »
Pneumatic Calibrators have built-in pressure source.
DPI 320/325 Series high pressure portable calibrators offer bottle source for dry pneumatic calibrations to 3000 psi. Combined with electrical source/measure and PC interface, instruments provide calibrations with 0.025% FS accuracy. Offerings include 122 in.Ã-³ capacity gas cylinder, precision regulator, and fine volume adjuster. Pressure ranges vary from 0-500 psi thru 0-3000 psi. DPI 325...
Read More »
Pressure Calibration System offers sensor-calibration module.
Sensor Calibration Module (SCM) enables users to source low voltage for transducer or transmitter excitation and read back mV, V, or mA output from sensor. Supplied pressure setpoint and electrical output are displayed on screen simultaneously. SCM can be retrofitted into company's DPI 515 calibration system and is accessed via 15-way, D-type connector. Multi-way connecting cable, terminated with...
Read More »
Liquid Level Meter offers accuracy to -
Suitable for industrial level measurements in liquid control applications, PDCR/PTX 1830 Series offers FS operating ranges from 1 to 900 psi with choice of electrical format. Its 4-wire transducer variant, PDCR 1830, offers FS scale signal of up to 100 mV, while transmitter variant, PTX 1830, is a standard 2-wire, 4 to 20 mA device. Its integral lightning surge arrestor protects against raised...
Read More »
Pressure Transmitters provide depth/level measurements.
PTX 1835 and 1235 submersible pressure transmitters are designed for use in groundwater, well water, canals, rivers, and other applications where possibility exists for lightning damage. Transmitters are constructed of all welded titanium and protected to IEC 61000-4-5, Level 4.
Read More »