Devcon
Danvers, MA 01923
Share:
Potting Compound seals electrical components/wiring.
SyonÃ-® Tru-CastÃ-® 111 thermally conductive epoxide formulation fills voids completely and cures with minimal air entrapment. Black, aluminum-oxide-filled compound can be used as structural adhesive to create heat-sink lap joints. Depending on curing agent used, mixed viscosity rages from 2,000-20,000 cps, pot life varies from 30 min to 3.5 hr, and functional cure time takes from 24 hr @...
Read More »Epoxy has 10 minute working time.
Self-leveling, 100% solids 10 Minute(TM) Epoxy adhesive is formulated for bonding, potting, and cosmetic repairs in various OEM applications. Able to adhere to varied substrates, it is available in clear and black and has fixture time of 20 min. Functional cure is attained in 90 min. Cured product has 2,400 psi tensile shear strength, 20-25 pli peel strength, and 10 lb-ft/inÃ-² impact...
Read More »Adhesives produce humidity- and weather-resistant bonds.
Plastic Welder(TM) non-sagging structural methacrylate adhesives require little or no surface preparation and offer impact and peel resistance. Available in black, white, or off-white, product bonds engineered plastics and dissimilar substrates. It can be used at service temperatures to 250Ã-
Read More »Urethane Compound repairs conveyor belts.
Offered as liquid or putty, FlexaneÃ-® Fast Cure consists of 100% solids urethane compound that is suited for making repairs to worn or damaged conveyor belts and other rubber equipment. It bonds to rubber, metal, concrete, fiberglass, and wood and cures to functional medium-hard rubber in 1.5 hrs. Compound has working time of 8 min, is tack-free in 30 min, and withstands service temperatures...
Read More »Metal Adhesive requires no primers.
Metal Welder II 2-part, 10:1 methacrylate adhesive bonds metal to other metals or to dissimilar substrates. Mixed and dispensed from manual or pneumatic dispensers with static mixing nozzles, it attains functional cure in 2-4 hours at room temperature. Load-bearing bonds withstand service temperatures from -40 to 250Ã-
Read More »Flexible Adhesive suits assemblies subject to stress.
With tensile elongation of 130-140%, Flex Welder(TM) structural methacrylate adhesive fills gaps up to 3/8 in. and bonds plastics, composites, and metals in applications involving flexing, shock, or vibration. Room-temperature-cure adhesive provides load-bearing bonds that withstand impact, weathering, humidity, and temperature variations up to 250Ã-
Read More »Patching Compound protects concrete floors.
Ultra Quartz(TM) 100% solids, silica-filled epoxy putty offers resistance to chemicals and abrasion. Trowelable to smooth, nonporous finish, it attains compression strength of 9,000 psi. Compound can be built up to 1 in. thick on damaged or pitted concrete floors. Because Ultra Quartz will not sag, drip, or run, it can be used to repair vertical and overhead surfaces. With pot life of 60 min, it...
Read More »Epoxy Adhesives require no fixturing.
Available as in three formulations, adhesives withstand service temperatures of -40 to +200Ã-
Read More »Epoxies offer unlimited working time.
Single-component Series SC 2000 epoxies bond metal, ceramics, glass, and other substrates. Heat-cured, self-leveling adhesives require no mixing and offer unlimited working time at room temperature. Available in 4 formulations, products provide thermal stability, corrosion resistance, and gap-filling properties. SC 2001 and SC 2003 withstand service temperatures from -40Ã-
Read More »Rubber-Toughened Adhesives suit OEM applications.
ZipGripÃ-® clear-drying cyanoacrylates bond plastics, rubber, and metal and withstand temperatures up to 280Ã-
Read More »