National Instruments Corp.
Austin, TX 78759-3504
Share:
Digital Multimeter operates as DMM and isolated digitizer.
PXI-4070 FlexDMM 6-½-digit digital multimeter (DMM) fits in single-slot 3U PXI module. It offers 1.8 MS/s fully isolated digitizer mode, self-calibration, and offset compensated ohms measurement. Able to deliver 6 ppm basic 24-hour DC voltage accuracy and sub -µV sensitivity, FlexDMM offers continuously variable DC reading rate from 100 S/s at 6-½ digits to 5 kS/s at 4-½ digits. NI-DMM driver...
Read More »
I/O Module allows 4-wire RTD measurements.
FP-RTD-124 FieldPoint(TM) module offers 8 input channels for direct connectivity to 4-wire 100 platinum resistance temperature detectors (RTDs). It has 16-bit resolution and 50/60 Hz filtering. Module works with FieldPoint Explorer software as well as FieldPoint 2000 family. Suitable applications include those that require temperature sensing throughout process, such as controlling multi-stage...
Read More »
USB Serial Converters suit scientific laboratory research.
Serial converter models NI USB-232 and NI USB-485 allow engineers and scientists to connect to existing serial instruments using USB technology. NI USB-232 converters use RS-232 Serial protocol, while NI USB-485 models use RS-485 or RS-422 serial protocols. Both converters are available in 2- or 4-port configurations. Data throughput rates are rated to 230.4 kb/s (NI USB-232) and 460.8 kb/s (NI...
Read More »
Software Toolset makes frequency measurements.
Sound and Vibration Toolset v2.0 for LabVIEW v6.0 provides functions such as zoom FFT, peak search, and power-in-band. It includes 30 application examples, including engine run up, pass by noise, frequency response, and orbit plots. Toolset builds on existing library of measurements and examples for audio, acoustic, and vibration applications. Tools perform simultaneous multichannel measurements...
Read More »Software creates embedded vision systems.
Vision Development v6.1 consists of IMAQ Vision 6.1, which includes 300 machine vision and scientific imaging functions, and IMAQ Vision Builder 6.1. Users can quickly prototype vision applications, generate LabVIEW programs on host computer, and deploy these applications on real-time PXI platform. LabVIEW Real-Time expands LabVIEW development environment to create real-time embedded systems with...
Read More »
Analog Output Modules deliver fast waveform output for PCI.
PCI-6731 and PCI-6733 have 4 and 8 analog output channels, respectively, and deliver 1 MS/sec per channel, 16-bit, analog waveform outputs. Both have 2 counter/timers, software-controlled onboard timing signal routing, and connect to company's instrumentation, data acquisition, motion, and vision products. DAQT(R) 6.9 driver software interfaces to LabVIEW(TM), LabWindows(TM)/CVI, and Microsoft...
Read More »
Analog Output Modules plug into PCI port.
With 16-bit NI PCI-6731 and NI PCI-6733 analog output modules, engineers can control waveform amplitudes with higher resolution. Both modules deliver high-channel density, 1 MS/s per channel 16-bit analog waveform output, and two counter/timers. NI PCI-6731 has four output channels, and NI PCI-6733 has eight. Both come with NI-DAQ 6.9 driver software that works with NI LabVIEW, LabWindows/CVI,...
Read More »
Inspection System checks flat panel displays.
NI Display Test software and hardware provides suite of pre-built display tests, including alignment, pixel defect, color, and contrast, for testing cell phones, PDAs, automobile displays, and other mobile terminals. To acquire images, it uses IMAQ(TM) machine vision software and image acquisition boards that integrate with LabVIEW and PXI measurement and automation hardware. Engineers have...
Read More »Switching Software manages high-density systems.
Switch Executive software helps engineers build flexible, high-density switching systems without programming switching routes and manually managing system. It simplifies switching configurations in applications such as testing systems by combining several switch connections into single configuration. Engineers can use software-assisted switch routing to connect instruments or other test devices...
Read More »
Toolset provides PID control.
LabVIEW(TM) PID Control Toolset v6.0 allows engineers to create multiple control loops and customized control systems while maintaining individual set points, process variables, and PID gains for each unit. It includes built-in tools for control system prototyping, and develops applications for automated control by combining PID, fuzzy logic, and control functions with math, logic, and I/O...
Read More »