National Instruments Corp.
Austin, TX 78759-3504
Share:
USB DAQ Devices provide sampling rates up to 800 kS/s.
With bus-powered, plug-and-play connectivity, Series USB-9000 includes 4- and 8-channel models with 250 Vrms channel-to-earth ground isolation, noise immunity, and high-common-mode voltage range. Interactive data-logging software enables user to log data and export it to spreadsheet applications such as Microsoft Excel. Utilizing DAQ devices with NI-DAQmx driver software, engineers can develop...
Read More »
CAN Interface Module controls in-vehicle DAQ.
NI 9853 2-port, high-speed Controller Area Network (CAN) interface module plugs into CompactRIO chassis to monitor in-vehicle CAN buses, read and write ECU and actuator values, and communicate with motion drives and motors. CompactRIO and NI 9853 CAN module combine with Labview for 40 MHz CAN data response. Offers 25 nsec resolution data synchronization, with 11-bit and 29-bit arbitration ID...
Read More »DAQ Devices offer 80 analog input channels.
Providing sampling rates up to 250 kS/s, M Series PCI-6225 and PXI-6225 include 2 analog output channels, 24 digital I/O lines, hardware-timed digital I/O rates up to 1 MHz on 8 DIO lines, and two 80 MHz, 32-bit counter/timers. NI-MCal technology performs self-calibration at each input range and compensates for nonlinearity error. Measurement services software offers intuitive applications...
Read More »Software extends LabVIEW to 32-bit embedded processors.
LabVIEW Embedded Development Module provides scientists and engineers with graphical approach to algorithm design, simulation, prototyping, and deployment of custom designs for embedded systems. Graphical front panel controls and indicators help engineers interactively experiment and debug embedded code. Development Module includes more than 400 analysis functions for signal processing, linear...
Read More »
Motion Control Software communicates with intelligent drives.
SoftMotion Controller allows engineers to use LabVIEW graphical development environment to create distributed motion applications. IEEE 1394-based ServoWire SM drives from ORMEC, and CANopen-based Accelnet and Xenus drives from Copley can be programmed with NI-Motion API in LabVIEW. Programmable automation controllers can be used to incorporate vibration monitoring, web connectivity, and...
Read More »
PCI DAQ Device features 200 kS/sec sampling rate.
Offering 16 channels of analog input with 16-bit resolution, NI PCI-6010 PCI plug-in data acquisition (DAQ) device features 2 analog output channels, 10 digital lines, and 2 counter/timers. It uses 37-pin D-Sub connector for I/O channel access and provides Ã-
Read More »
USB Switch Mainframes simplify automated test setup.
Along with NI USB-1359 communication adapter and NI-SWITCH Soft Front Panel software, NI USB mainframes deliver plug-and-play solutions for implementing high-channel-count switching systems. Products simplify troubleshooting and hardware setup and offer plug-and-play switch control for SCXI platform. They utilize PC USB port to control any SCXI switch and are offered in 4- and 12-slot models with...
Read More »
Flexible Resolution Digitizer supports virtual instrumentation.
Modular PXI-5922 can perform multiple instrument synchronization with module-to-module skew of less than 1 ns typ and onboard memory up to 256 Mb per channel. Used with LabVIEW v7.1, it can create ac voltmeters, audio analyzers, frequency counters, spectrum analyzers, or I/Q modulation analyzers. Unit uses FlexII ADC, which samples from 16 bits @ 15 MS/s to 24 bits @ 500 kS/s, and directly...
Read More »Image Acquisition Boards suit machine vision applications.
Designed for Camera Link cameras, Model PCI-1426 features onboard image binarization, 16 Mb onboard memory, and optically isolated, 15-pin D-Sub connector for camera triggering and system synchronization. Monochrome, 4-channel Model PCI-1410 supports nonstandard analog cameras and eliminates need for extra synchronization signals to acquire nonstandard images. Model PCI-1405 is a color analog...
Read More »Software speeds machine vision with advanced algorithms.
Vision 7.1 Development Module provides vision tools for engineers and scientists using LabVIEW, LabWindows/CVI, C/C++, or Visual Basic to create vision applications that inspect, align, identify, and measure objects. Users can access algorithms such as geometric matching, object classification, OCR, and 2D bar code readers to locate, sort, and track objects, even under poor imaging conditions....
Read More »