National Instruments Corp.

Architectural & Civil Engineering Products

Interface Board provides distributed synchronization.

Engineers can use NI PCI-1588 Interface to synchronize clocks and events on multiple distributed devices with submicrosecond precision using IEEE 1588 precision time protocol. It uses RJ-45 Ethernet cabling and can operate as either master or slave clock module. Future time events and time stamping capabilities can be used to correlate events distributed across Ethernet network. Onboard FPGA let...

Read More »
Communication Systems & Equipment

Multiplexer and DMM/Switch help expand PXI capabilities.

Designed for automated test systems, PXI-2527 electromechanical switch module is 300 V, 32-channel multiplexer that offers switching capacity up to 300 Vdc/Vac CAT I or up to 2 A. It has scan rate of 140 channels/sec and integrates cold-junction compensation sensor. DMM/Switch Express VI for NI LabVIEW extends LabVIEW Express technology to facilitate multipoint DMM operations and synchronization...

Read More »

DAQ Module features channel-to-channel isolation.

Providing 8 channels of 16-bit analog input measurements, PXI-4224 is 60 Vdc, Cat. I data acquisition (DAQ) module with channel-to-channel isolation that eliminates ground loops and promotes noise immunity. It works with LabVIEW 7 Express and NI-DAQmx measurement services software and protects measurement system from possible voltage spikes or power surges. With 333 kS/s sampling rate, module...

Read More »
Architectural & Civil Engineering Products

Interface Cards enable PXI/CompactPCI control via laptop.

Suited for portable and mobile applications, ExpressCard MXI and PCMCIA CardBus interfaces provide software-transparent link to PXI/cPCI system, delivering compatibility with all drivers and application development environments. ExpressCard MXI (NI PXI-ExpressCard8360) offers direct control of PXI/cPCI systems from laptop computers with ExpressCard slot. ExpressCard standard works with USB 2.0...

Read More »
DAQ Boards suit sound and vibration applications.
Architectural & Civil Engineering Products

DAQ Boards suit sound and vibration applications.

In addition to 24-bit output channels, Dynamic Signal Acquisition board, Model PCI-4461, offers 24-bit input channels, making it suited for stimulus response applications. Input-only version, Model PCI-4462, provides four 24-bit input channels and 118 dB dynamic range. Engineers can synchronize multiple PCI-4461 and PCI-4462 boards to attain 4-input and 4-output systems or 6-input and 2-output...

Read More »
DAQ Board offers simplified I/O connectivity.
Architectural & Civil Engineering Products

DAQ Board offers simplified I/O connectivity.

Equipped with NI-STC 2 system controller, PCI-6221 multifunction DAQ board uses 37-pin D-Sub connector for I/O connectivity and provides measurement and control capabilities suited for machine builders, control systems, design verification, and test. Features include 16, 250 kS/s, 16-bit analog inputs; two 833 kS/s, 16-bit analog outputs; and two 80 MHz, 32-bit counter/timers. Unit also has 10...

Read More »
Six-Slot PXI Chassis suits remote control applications.
Computer Hardware & Peripherals

Six-Slot PXI Chassis suits remote control applications.

Providing portable, real-time remote control, NI PXI-1036 chassis may be controlled via PC, server, or workstation through MXI-Express, a transparent PCI Express-to-PCI bridge. Engineers also can use MXI-4 for traditional remote control of PXI. Weighing under 12 lb, PXI entry point enables control of up to 5 modular instrument or DAQ modules across remote link that offers 110 Mbps sustained...

Read More »
DAQ Boards deliver simultaneous sampling rates to 3 MS/s.
Architectural & Civil Engineering Products

DAQ Boards deliver simultaneous sampling rates to 3 MS/s.

S Series devices for PCI bus include 3 MS/s sampling PCI-6133 and PCI-6132 and 500 KS/s PCI-6123 and PCI-6122. With 14-bit resolution, PCI-6133 and PCI-6132 include dedicated A/D converter per channel architecture as well as 8 and 4 channels of simultaneous sampling, respectively. Models PCI-6123 and PCI-6122, with 8 and 4 channels of simultaneous sampling, offer 16-bit resolution. Each board...

Read More »
Computer Hardware & Peripherals

DAQ Devices feature PCI Express bus.

Multifunction, PC-based Models PCIe-6251 and PCIe-6259 offer analog and digital I/O with dedicated per-slot bandwidth of PCI Express. Units feature up to 32 analog channels with 16-bit, 1.25 MS/s sampling speed and 10 MHz digital I/O on up to 32 lines. They utilize x1 PCI Express connector, which provides 250 MB/s bandwidth per device. Part of M Series, DAQ devices include NI-STC 2 system...

Read More »
Digital Signal Analyzer measures sound and vibration.
Computer Hardware & Peripherals

Digital Signal Analyzer measures sound and vibration.

Featuring 102 dB dynamic range, IEPE signal conditioning, and 8 input channels with acquisition rates of 2-33.3 kS/s, cRIO-4408 DSA 24-bit DAQ device makes sound and vibration measurements from integrated electronic piezoelectric sensors. It offers communication through 10/100 Ethernet, and built-in analog and digital antialiasing filters automatically adjust according to sampling rate. Labview...

Read More »

All Topics