Amplifier Research Corp.
Souderton, PA 18964
Share:
Traveling Wave Tube Amplifiers deliver up to 300 W.
Model 300T2G8, ranging from 2.5-7.5 GHz, provides 300 W minimum at amplifier output connector. Model 250T1G3, ranging from 1-2.5 GHz, and Model 250T8G18, ranging from 7.5-18 GHz, each deliver 250 W. All are self-contained, forced air-cooled broadband TWTAs suitable for applications that require instantaneous bandwidth and high gain. They provide power needed to ensure desired 200 V/m level for...
Read More »
Transient Generators run automotive tests with one click.
Designed for easy modification to keep pace with changing needs, EM Test 200B Series are pre-programmed to run various manufacturer and international standards routines by single click from front panel. With ISM ISO Windows-based software, users remotely operate generators and modify test parameters. Software allows for integration of each generator's capabilities to become fully automated...
Read More »
Pulse Generator meets European and North American specs.
Model MPG200S15 creates test pulses in microsecond range for conducted immunity testing in automotive electronic systems. Product generates SAE J1113/11 pulses 1 and 2 as well as coupling and inductive switching pulses of SAE J1455 for 12 and 24 V systems. Fulfilling ISO 7637 Part 2 requirements, system is supported by ISM ISO Windows-based software, which includes standards library of 50+...
Read More »
Simulator provides transient generator immunity testing.
EM Test UCS500M/6B includes burst, surge, power fail, plus optional built-in ESD and 100 kHz Ringwave test modules. It can test to IEC 61000-4-2, 4-4, 4-5, 4-8, 4-9, 4-11 and 4-12, as well as ANSI/IEEE C62.41, European Generic Standards EN61000-6-1 and 6-2, and EN60601-1-2. Windows-based software provides complete test report that can be exported to RTF file or Excel for editing. Unit suits...
Read More »
Immunity Tester provides complete test report.
EM Test Model CWS500D immunity tester contains signal generator, directional coupler, power amplifier, controller, and Windows-based operating software for Automotive, Telecom, and Military applications. Includes GPIB (IEEE 488.2) interface that permits connection of external dual channel power meter for measuring forward power and for monitoring injected RF current. Uses 100 W RF amplifier with...
Read More »
Microwave Amplifier provides low harmonic content.
Model 10ST1G18 broadband hybrid solid state and traveling wave tube microwave amplifier delivers 10 W minimum at amplifier output connector. Instantaneous frequency range is from 0.8-18 GHz in 4 sub-bands. Self-contained, air-cooled unit has built-in IEEE-488 interface, 0 dBm input, gain control, RF output sample port, and VSWR protection for TWT. It provides monitoring of TWT helix current,...
Read More »
Amplifier delivers 10,000 watts.
Model 10000A250 Class A, VSWR tolerant amplifier uses solid state circuitry. It has been tailored for frequency range of 100 kHz to 100 MHz. Unit runs quietly and dissipates up to 40 kW of primary power in its quiescent state.
Read More »
Broadband Amplifier meets aircraft testing standards.
Self-contained, air-cooled, solid state Model 75A400 75 W amplifier spans frequency range from 10 kHz to 400 MHz. This makes it suitable for laboratory applications, antenna and component testing, plus commercial aircraft conducted susceptibility testing per DO-160D. Push-pull MOSFET circuitry lowers distortion, improves stability, and allows operation into any load impedance without damage.
Read More »
Surge Simulator tests telecom equipment.
Model TSS500M/6B meets requirements of Bellcore GR 1089 for first- and second-level lightning surges on 2 or 4 telecom ports. It simulates 2/10, 10/360 and 10/1000 surge waveforms up to 5 kV. Pulse repetition rates vary from one every 2 sec for 2/10 pulse, up to one per min for 10/1000 pulse. Built-in voltmeter and current meter measure and record peak surge voltage and current. Simulator has...
Read More »
RF Test System coordinates components.
Brainlink(TM) software and Series SC 1000 system controller connects and coordinates multiple pieces of RF test equipment, including 4 amplifiers, 4 antennas, 3 signal generators, 4 directional couplers, and spectrum analyzers or receivers. System enables range of emissions and susceptibility tests to be conducted without manually changing cable feeds or equipment settings. It automatically...
Read More »