SCHURTER Electronic Components

SMD Fuses offer breaking capacity of 1,500 A.
Electrical Equipment & Systems

SMD Fuses offer breaking capacity of 1,500 A.

Offering total of 19 current ratings from 160 mA to 10 A at voltages up to 277 Vac and 250 Vdc, UMT-H Series with time-lag characteristic is capable of providing reliable overcurrent protection while protecting against short circuits up to 1,500 A at rated voltage. Series is suited for primary protection of power supply units as well as protection of single phase industrial appliances, including...

Read More »
Cord Retaining System is available for IEC C8 appliance inlets.
Fasteners & Hardware

Cord Retaining System is available for IEC C8 appliance inlets.

Requiring one screw for fastening to panel, cord retention system features retaining clip for IEC C8 inlets and mating cord sets. Clips fit SCHURTER series 2576 flange mount and 2578 snap in mount inlets. System is offered as complete kit, including retainer clip, inlet, and power supply cord. Designed and tested to achieve 200 N retention force with SCHURTER C8 inlets and mating cord, clip...

Read More »
Electrical Equipment & Systems

Power Connector is compatible with V-Lock cord sets.

To prevent unintended disconnection of power from equipment, KEA series power entry module mates with V-Lock cord sets. No additional hardware is required to install cord retaining system; cord set safely latches into notch in plastic housing and is removed by depressing latch. Suited for medical devices as well as IT and audio equipment, solution features C14 inlet, 1- or 2-pole fuseholder for...

Read More »
Shock-Safe Fuseholders are UL rated up to 16 A at 400 Vac.
Communication Systems & Equipment

Shock-Safe Fuseholders are UL rated up to 16 A at 400 Vac.

Offering 7 mounting options, FPG series accepts 5 x 20 mm fuses. Thermoplastic version, also available, meets requirements of IEC 60335-1 edition 4.0 for appliances in unattended use. Available with IP40 or IP67 seal protection for 5 x 20 mm fuses with front and rear panel mounting and either vertical or horizontal PCB mounting, products come with fuse carriers and slotted or finger grip caps....

Read More »

Compact Power Connector Is Now V-Lock Compatible
Controls & Controllers

Compact Power Connector Is Now V-Lock Compatible

SCHURTER'S popular KEA series provides simple and cost effective cord retaining solution Santa Rosa, California – SCHURTER is pleased to announce, that its compact KEA series power entry module, with 1- or 2-pole fuseholder, now mates with V-Lock cord sets. The KEA's new V-Lock compatible feature prevents unintended disconnection of the power from the equipment. Unlike wire bail or clamp...

Read More »
Seal Kit gives cord connector/inlet connection IP54 protection.
Adhesives & Sealants

Seal Kit gives cord connector/inlet connection IP54 protection.

Available for 5707 series power entry module, seal kit provides IP54 rating between inlet and cord connector as to prevent dust or splashing water from entering between them when equipment is plugged in. Independent testing laboratories have examined and confirmed reliability of sealing kit according to IEC 60529. To ensure tightness of IP54 with these sealed versions in actual use, safety...

Read More »

Components Approved for Use in Unattended Household Appliances
Communication Systems & Equipment

Components Approved for Use in Unattended Household Appliances

Insulation materials meet additional glow wire tests as outlined in IEC 60335-1, 4th edition Santa Rosa, California — SCHURTER is pleased to announce an assortment of its most popular components for use in unattended household appliances, according to IEC 60335-1, 4th edition. Experience has shown that unattended appliances in particular tend to self-ignite when components fail, causing fires...

Read More »
EMC Filter rids noise in high-power inverters.
Electronic Components & Devices

EMC Filter rids noise in high-power inverters.

With rated current ranging from 150–2,500 A at 520 or 760 V, FMCC SOL is designed for high attenuation of electromagnetic interference in 3-phase systems. UL-approved unit complements existing FMER SOL DC filter for use in inverters where both AC and DC lines require filtering, such as those used for photovoltaic and wind harvesting systems. FMCC SOL is also suited for solo use in 3-phase...

Read More »
SMD Fuse offers 14 rated currents from 500 mA to 10 A.
Electrical Equipment & Systems

SMD Fuse offers 14 rated currents from 500 mA to 10 A.

Suitable for voltages up to 250 Vac and 125 Vdc, quick-acting Model UMF 250 provides over current and short circuit protection in primary and secondary circuits. Unit features breaking capacity up to 200 A at rated voltage. Measuring 3 x 10.1 mm, surface mount fuse offers alternative to traditional 5 x 20 mm cartridge fuses. Halogen-free device is RoHS-compliant and suited for power supplies,...

Read More »
SMD Fuse offers 1,500 A breaking capacity at 277 Vac/250 Vdc.
Electrical Equipment & Systems

SMD Fuse offers 1,500 A breaking capacity at 277 Vac/250 Vdc.

Designed for applications where cartridge fuse is used, UMT-H Universal Modular Fuse is offered with 6 rated currents from 160 mA to 2 A. Dimensions of 5.3 x 16 mm help conserve board space compared to 5 x 20 mm cartridge fuses to allow for downsizing, while position of device markings makes key information – approvals, current rating, and voltages – immediately available. Spacing...

Read More »

All Topics