SCHURTER Electronic Components
Santa Rosa, CA 95403
Stainless Steel Pushbutton Switch powers up to 250 Vac.
Water- and shock-resistant MSM series features flat front construction of 1.7 mm for near-flush mounting. Combining detachable contact module with stainless steel housing and actuator, switches come in 3 sizes with 16, 19, and 22 mm mounting diameters. Switching action is single-pole, momentary with NO and NC contacts. Available with point or ring illuminated options, actuation force is 4.5 N,...
Read More »
Capacitive Sensor controls liquid level in tanks and tubs.
Featuring aluminum housing, Model CLS 16 has mounting diameter of 16 mm and mounting depth of 8 mm behind panel. It has no mechanical parts that can fail due to repeat operation. Requiring supply voltage of 7.5-24 Vdc, unit produces NPN output, has 30-wire connections, and withstands extreme temperatures from 0-70Ã-
Read More »
Power Entry Module offers low-profile design.
Designed to save space and minimize time during assembly of electronic devices, pcb-mounted Series DC21 prewires switch and inlet for 3-pin (L, N, and E) installation. AC inlet and on/off switch functions are internally wired, and rear cover further insulates module from other components. Available in 1- or 2-poles with lighted option, rocker-style switch is recessed to avoid accidental...
Read More »
SMT Fuse designed for use in hand held devices.
Built according to UL 248-1, surface-mount USF 1206 has interrupt rating of 50 A at 63 Vdc across entire range and is cURus-approved. Thin-film, chip fuse measures 1.6 x 3.20 x .6 mm and incorporates legend marking that provides visible indication of ampere rating. Product is lead-free, including fusing element, and exhibits resistance to soldering heat at 260Ã-
Read More »
Fuseblock features easy-grab cover.
Approved to max of 10 A/250 V, Series OGN comes pre-loaded with 5 x 20 mm fuse and fitted cover. Cover grabs hold of fuse, removing it when cover is lifted, simplifying replacement. Rated power acceptance at ambient air temperature is 4 W with or without reflow cover, or 2.5 W with transparent cover. Thermoplastic material of socket is rated UL 94V-0 and withstands high soldering temperatures....
Read More »
Power Line Filter features 20 A rating.
Snap-in, Model C20F can be used in power supplies rated up to 20 A at 125 V and 16 A at 250 V. AC inlet is designed according to IEC 320-1, type C20, and is combined with standard or medical grade filter. Bulky wires between connector and filter are eliminated, and direct path to ground is achieved. Typical surge withstand is greater than 2.5 kV, L-N. Unit is suited for power supplies and...
Read More »
Surface-Mount Fuse has 50 A @ 32 V AC/DC interrupt rating.
Thin-film, chip fuse USF 0603 measures 1.6 x 0.8 mm, is built according to UL 248-1, and is cURus approved. Suited for sensitive electronic devices that require reliable over current protection, lead-free fuse has legend marking that provides visible indication of ampere rating. Product is suited for hand-held devices such as cell phones, PDAs, laptops, 2-way radios, and digital cameras.
Read More »
Power Entry Modules have current ratings from 1-10 A/250 V.
Series DC11 and DC12 combine AC inlet, with optional EMC filter, and rocker style switch recessed in unit to prevent accidental actuation. In-rush rating is 100 A for 3-4 msec, 5 A continuous, and lifetime is rated for 50,000 cycles at 10 A/250 V. Offered for 1- or 2-pole switching, unlighted or lighted units snap-in or screw-on for mounting. Low band pass filter is optimized to attenuate noise...
Read More »
Surface-Mount Fuse is lead free.
Time-lag Series OMT 125 offers safety at fault currents up to 100 A @ 125 V AC/DC for protection of personnel and equipment from fire or damage. The 1 A fuse offers power dissipation of 88 mW and voltage drop of 88 mV. Rated currents are 500 mA to 5 A @ 125 V. Built to UL 248-14, unit can be directly soldered onto pcb or used with SMD fuseholder. Soldering heat resistance is 260Ã-
Read More »
Capacitive Switch activates by light touch.
Momentary/latching Model CSE15 uG (Capacitive Switch Element under glass) is actuated by touch or by approaching surface. It offers adjustable sensitivity and point illumination in varying colors. Connecting illumination directly to switched output signal results in on/off feedback. Electronic parts are molded into plastic frame, impervious to dust, dirt, moisture, and heat. Switches can be...
Read More »