SCHURTER Electronic Components
Santa Rosa, CA 95403
New MGA-A COTS+ 1206 SMD Fuse Minimizes the Risk of Short Circuits
The new MGA-A Cots+ 1206 SMD lead-free ceramic fuse prevents the formation of tin whiskers and dendrites, mitigating the risk of short circuits. The fuse consists of a thin film construction with gold-plated end caps and a hermetic seal. The MGA-A has an operating temperature range of -55 degrees C to +125 degrees C with a breaking capacity of up to 300 A at 125 VDC for 4 and 5 A versions. It...
Read More »
Power Entry Module Now Features Screw and Snap Mounting Options
The power entry module series DD12 from SCHURTER, Inc. is now equipped with more mounting options and an integrated ground line choke suppressing high-frequency interference. It is available in a compact housing featuring an appliance inlet with a 1- or 2-pole fuse holder, an on/off switch and an EMC filter. The power entry module is ideal for medical equipment requiring low leakage filters for...
Read More »
Schurter Announces DG11 Series Power Entry Module with TA35 Circuit Breaker Preventing Accidental Actuation
Schurter’s new DG11 series power entry module combines an IEC appliance inlet with an integrated circuit breaker providing overcurrent protection. Its V-lock cordset compatible design protects the module against unintended disconnection. The power entry modules are available in front panel snap-in and front or rear panel screw-mount. These ENEC and cURUS approved modules are suitable for...
Read More »
New C20F Series Power Entry Modules Meet Glow Wire Tests
SCHURTER’s C20F Series Power Entry Modules are designed for power supplies rated up to 16 A at 250 VAC and meet UL/CSA, ENEC and cURus standards. Units are suitable for distribution units and power supplies rated up to 3500 W power ratings. The inlets are compliant to IEC 60950 (commercial), IEC 60601-1 (medical equipment) and IEC 60335-1 (Home appliance) standards. Units come with V-Lock cord...
Read More »
New Engineering TouchKit from SCHURTER Comes with Multi-Touch Capability
Engineering TouchKit consists of Plug and Play 10.1 in. PCAP touchscreen sensor, an EETI chip and a software. Kit can be operated with or without stylus pen for accurate pressure measurement. The multi-touch capability allows simultaneous operation detection of up to 10 fingers and the touchscreen is resistant to moisture. The touch controller is designed to withstand wave fields up to 10 V/m or...
Read More »
Latest PSUP 24 VDC Switching Power Supply is Suitable for Indoor Lighting Applications
PSUP 24 VDC Universal Switching Power Supply delivers a constant 24 VDC, with a power of 8 W output with input of DC (127 - 370 VDC) or AC (90 - 264 VAC, 47 - 63 Hz). Unit is offered in IP42 rated insulated housing and can be operated in -30°C to 70°C temperature range. The product is designed for point and ring illuminated Metal Line switches. Unit features short circuit, overload and...
Read More »
FPBB RAIL Filters Come with OverVoltage Varistor
FPBB RAIL Filters is available in three variations and are designed for currents from 1 A to 16 A with a maximum of 125 / 250 VAC and 250 VDC. These two-stage units are suitable for industrial or machine controls applications. Filters are operated in the range from -40°C to 100°C. Units offer low leakage current feature cage clamp terminals.
Read More »
IEC Appliance Outlets Provide Space and Cost-Saving Solutions for Intelligent PDUs
Santa Rosa, California, March 9, 2018 - SCHURTER’s family of appliance outlets according to IEC 60320-1, Styles F and J, are available with integrated light pipe. The light pipe indicates operational status, or other function status, as an optional feature to standard connectors. It is designed to channel light from LEDs on the pc board to the front of the connector. The new technology offers...
Read More »SCHURTER Couplers are manufactured to IEC standard 62735-1.
SCHURTER Couplers are suitable for PDUs and data center equipment manufacturers. These couplers are designed for 400 VDC applications and pluggable power in DC systems.
Read More »
DD14 Power Entry Module is compatible with V-Lock retaining cordsets.
DD14 Power Entry Module features IEC C14 appliance inlet with 2-pole switch and 2-pole fuseholder. Unit comes with 2-stage EMC filter that suppresses interference voltages and provides positive effect on electro-magnetic compatibility. Module is rated to 10 A/ 250 VAC current levels and shielding is improved with screwing metal casing of filter to the panel. Units meet UL/ CSA, ENEC and cURus...
Read More »
New MGA-A COTS+ 1206 SMD Fuse Minimizes the Risk of Short Circuits
The new MGA-A Cots+ 1206 SMD lead-free ceramic fuse prevents the formation of tin whiskers and dendrites, mitigating the risk of short circuits. The fuse consists of a thin film construction with gold-plated end caps and a hermetic seal. The MGA-A has an operating temperature range of -55 degrees C to +125 degrees C with a breaking capacity of up to 300 A at 125 VDC for 4 and 5 A versions. It...
Read More »
Power Entry Module Now Features Screw and Snap Mounting Options
The power entry module series DD12 from SCHURTER, Inc. is now equipped with more mounting options and an integrated ground line choke suppressing high-frequency interference. It is available in a compact housing featuring an appliance inlet with a 1- or 2-pole fuse holder, an on/off switch and an EMC filter. The power entry module is ideal for medical equipment requiring low leakage filters for...
Read More »
Schurter Announces DG11 Series Power Entry Module with TA35 Circuit Breaker Preventing Accidental Actuation
Schurter’s new DG11 series power entry module combines an IEC appliance inlet with an integrated circuit breaker providing overcurrent protection. Its V-lock cordset compatible design protects the module against unintended disconnection. The power entry modules are available in front panel snap-in and front or rear panel screw-mount. These ENEC and cURUS approved modules are suitable for...
Read More »
New C20F Series Power Entry Modules Meet Glow Wire Tests
SCHURTER’s C20F Series Power Entry Modules are designed for power supplies rated up to 16 A at 250 VAC and meet UL/CSA, ENEC and cURus standards. Units are suitable for distribution units and power supplies rated up to 3500 W power ratings. The inlets are compliant to IEC 60950 (commercial), IEC 60601-1 (medical equipment) and IEC 60335-1 (Home appliance) standards. Units come with V-Lock cord...
Read More »
New Engineering TouchKit from SCHURTER Comes with Multi-Touch Capability
Engineering TouchKit consists of Plug and Play 10.1 in. PCAP touchscreen sensor, an EETI chip and a software. Kit can be operated with or without stylus pen for accurate pressure measurement. The multi-touch capability allows simultaneous operation detection of up to 10 fingers and the touchscreen is resistant to moisture. The touch controller is designed to withstand wave fields up to 10 V/m or...
Read More »
Latest PSUP 24 VDC Switching Power Supply is Suitable for Indoor Lighting Applications
PSUP 24 VDC Universal Switching Power Supply delivers a constant 24 VDC, with a power of 8 W output with input of DC (127 - 370 VDC) or AC (90 - 264 VAC, 47 - 63 Hz). Unit is offered in IP42 rated insulated housing and can be operated in -30°C to 70°C temperature range. The product is designed for point and ring illuminated Metal Line switches. Unit features short circuit, overload and...
Read More »
FPBB RAIL Filters Come with OverVoltage Varistor
FPBB RAIL Filters is available in three variations and are designed for currents from 1 A to 16 A with a maximum of 125 / 250 VAC and 250 VDC. These two-stage units are suitable for industrial or machine controls applications. Filters are operated in the range from -40°C to 100°C. Units offer low leakage current feature cage clamp terminals.
Read More »
IEC Appliance Outlets Provide Space and Cost-Saving Solutions for Intelligent PDUs
Santa Rosa, California, March 9, 2018 - SCHURTER’s family of appliance outlets according to IEC 60320-1, Styles F and J, are available with integrated light pipe. The light pipe indicates operational status, or other function status, as an optional feature to standard connectors. It is designed to channel light from LEDs on the pc board to the front of the connector. The new technology offers...
Read More »SCHURTER Couplers are manufactured to IEC standard 62735-1.
SCHURTER Couplers are suitable for PDUs and data center equipment manufacturers. These couplers are designed for 400 VDC applications and pluggable power in DC systems.
Read More »
DD14 Power Entry Module is compatible with V-Lock retaining cordsets.
DD14 Power Entry Module features IEC C14 appliance inlet with 2-pole switch and 2-pole fuseholder. Unit comes with 2-stage EMC filter that suppresses interference voltages and provides positive effect on electro-magnetic compatibility. Module is rated to 10 A/ 250 VAC current levels and shielding is improved with screwing metal casing of filter to the panel. Units meet UL/ CSA, ENEC and cURus...
Read More »