Safety Interlock Switch monitors door and lock.
Utilizing 4 contacts, TL4019 series safety interlock switch monitors safety, door position, and lock. Rotatable head provides 8 possible actuator positions, and 270 lb locking force ensures guard door stays locked shut until machine is safe to enter. NEMA 6, glass-filled polyester housing withstands water washdown cleaning. When used with stainless steel actuator, switch provides one million...
Read More »
Enabling Switch Device aids in set-up of robotic machinery.
CE listed to all applicable standards, ESD5020 provides margin of safety needed during troubleshooting, set-up, programming, or servicing of robotic or automated machinery. Dual 3-position enabling switches are integrated into trigger to provide operator with constant control. Trigger has recognizable, middle enabled position, while redundant switch contacts ensure that machinery can be stopped...
Read More »
Safety Strips and Mats are available in yellow.
SGE series safety contact strips feature molded end caps and wiring plugs that are inserted directly into safety contact. Co-extruded safety contact is integral part of profile and comes housed in outer covering of non-conductive rubber that allows actuation angles up to 90Ã-
Read More »
Safety Interlock Switch meets category 3 safety requirements.
MC-S Series compact coded magnetic safety interlock switch consists of tamper-resistant, non-contact switch that operates with control unit that provides motor contactor monitoring and/or manual reset function. Switch and control unit act as fully monitored, dual channel system. Series is available in 3 sizes with plastic or stainless steel NEMA 6 enclosure suited to harsh environments. Single...
Read More »
Safety Interlock Switch prevents guard doors from opening.
Model TL8012-S provides 5 door and lock monitoring contacts and locking force of 450 lb to prevent guard doors from opening until machine reaches safe state. Product offers rotatable head with 4 actuator entry positions, and lid-mounted status light shows when guard door is unlocked. Stainless steel actuators and guide with NEMA 6 enclosure provide one million actuations minimum, even in...
Read More »
Laser System safeguards hydraulic press brakes.
LazerSafe LZS-003 uses flat band of laser light that continuously covers zone below punch over 40 mm width. Operator can work within 20 mm of front of punch and within 10 mm of rear of punch with no disruption to approach speed or bending process. Optical design detects obstructions as small as 4 mm while still being tolerant to vibration. Transmitter and receiver are mounted on ram of press,...
Read More »
Enabling Switch Device aids in set-up of robotic machinery.
CE Listed Model ESD5020 provides margin of safety needed during troubleshooting, set-up, programming, and servicing of robotic or automated machinery. It incorporates two 3-position enabling switches into trigger to provide operator with constant control. Redundant switch contacts ensure machinery can be stopped by releasing or squeezing trigger. Optional switch buttons and LED indicators may be...
Read More »
Safeguarding System is suited for hydraulic press brakes.
LazerSafe LZS-003's flat band of laser light covers zone below punch over 40 mm width. Operator works within 20 mm of front of punch and 10 mm of rear with no disruption to approach speed or bending process. Optical design detects obstructions down to 4 mm, and tolerates vibration. Machine performs failure detection by real-time monitoring of process under control and hydraulic, electrical, and...
Read More »
Light Curtain offers 14 mm resolution.
MicroSafe MC4700-14, available in protected heights from 150-1,800 mm, features 5 m sensing range. Response time of 6.5 msec allows unit to be mounted close to pinch points of hazardous equipment. Suited for small automatic assembly and material handling equipment, light curtain provides MPCE monitoring, exact channel select, and floating blanking. It includes 2-digit diagnostic display, 2...
Read More »
Light Curtain offers 14 mm resolution.
Utilizing true 2-box design, MiniSafe MS4600 Series consists of transmitter and receiver with integrated control reliable circuitry. Configurable for point-of-operation guarding applications, it is available in segmented lengths from 10-55 in. Unit features in-line connector cables, MPCE monitoring, exact channel select, floating blanking, and 2 PNP safety outputs. DeviceNet interface or Machine...
Read More »