Bel Fuse, Inc.
Jersey City, NJ 07302
Cat 6 Modular Plugs support 10 Gigabit Ethernet.
Engineered to exceed TIA/EIA-568B.2 data wiring standards, 39200 Series shielded Cat 6 RJ-45 plugs feature 2-level load bar that separates split pairs to exceed CAT 6 transfer performance requirements for NEXT (Near End Crosstalk) and Return Loss. Termination tool crimps contacts and shield fingers in one step, while dual crimp shield provides ground path connection as well as strain relief....
Read More »
DC/DC Converter features integrated heatsink.
Measuring 1.45 x 4.25 x 0.95 in. including built-in heatsink, Ã-¼ brick, 450 W CoolConverter(TM) GALW9V647 features input voltage of 36 75 Vdc and single isolated output of 9.6 Vdc. Output current is rated to 47 A, while line and load regulation is Ã-
Read More »
Circuit Protection Modules suit Tip and Ring applications.
SIP modules combine fuses, overvoltage protectors, and resistor networks into vertical mount, SIP configuration. Fuses comply with Power Cross test requirements UL 1950-60950 along with Telcordia/Bellcore GR-1089 for Tip and Ring protection. Packaged on ceramic substrate, devices come in 2- and 4-channel designs. Fuses offer 1.25 A rating at 600 Vac/125 Vdc, and feature power cross rating of 600...
Read More »
Transformers suit high-density PC board applications.
Surface-mount transformers, with 0.39 x 0.38 x 0.50 in. footprint, optimize the ADSL and G.SHDSL capabilities of Titanium(TM) G24 and Octane chipsets. Components comply with UL 1950 and EN60950 to provide basic insulation barrier with working voltage of 150 Vrms and operating temperature range of -40 to +85Ã-
Read More »
DC/DC Converters operate from nominal 3.3 V source.
V7PC-10C series non-isolated, step-down DC/DC converters provide up to 10 A output current from 3.3 V bus input. Output voltages range from 2.5 to 1.0 V; efficiencies range up to 92% full load. Singe-in-line (SIP) converters with thermal management require less than 1 square in. of PCB space. Operate to 70Ã-
Read More »
DC/DC Converters power low voltage silicon from 5V source.
V7PC-10B Series non-isolated, step-down converters provide up to 10 A of output current from 5 V source. Output voltages range from 3.3 V down to 1.0 V. V7PC-10B25S 2.5 V unit delivers 92% efficiency at full load, while 3.3 V unit, V7PC-10B33S delivers 94%. Converters feature single-in-line package, overvoltage and short-circuit protection, and fixed-frequency operation. They operate to 70 deg C...
Read More »
DC/DC Converters provide efficiencies above 90%.
V7PC-04C Series non-isolated boost DC/DC converters provide 5 V power from 3.3 V source. They operate over 3.0 to 4.0 V input range, while providing maximum output current of 4 A. Available with or without remote on/off feature, step-up units allow operation to 70 deg C with no derating. Converters feature single-in-line package, fixed-frequency operation, and overvoltage and short circuit...
Read More »
Transformers are for full rate or ADSL applications.
Engineered to match Texas Instruments' AC5 octal chipsets, Bel S560-6600-Z6 and S560-6600-CE transformers offer total harmonic distortion in EP10 packages. They are suited for Digital Subscriber Line Access Multiplexer equipment and may be specified for remote site Digital Loop Carrier multi-port applications. Devices feature electromagnetic interference suppression, operating temperature range...
Read More »