Clark Solutions
Hudson, MA 01749
Energy Monitor suits solar, submetering, energy transfer systems.
To aid in accounting for energy usage as well as allocation of costs to end users, Model DN-EM BTU/Energy Monitor measures thermal energy flow rate and totalized energy consumption in water and water/glycol based heating and cooling applications. System employs pulse generating Clark vortex flow transmitter, RTD sensors, Modbus 485 communications, and non-volatile memory. Generated scaled pulse...
Read More »Vortex Flow Transmitters offer flow ranges from 0.3-22 gpm.
Utilizing KÃ-¡rmÃ-¡n Vortex Trail principle of operation, DN-420 Series is suited for liquid media flow monitoring and control in Ã-¼-Ã-¾ in. piping systems. Loop-powered units use piezoelectric sensors embedded in ETFE vane located downstream of bluff to detect generated vortices. Frequency measured represents flow velocity, and flow factor is provided to convert frequency to...
Read More »Flow Sensors target solar and geothermal systems.
Operating on principle of KÃ-¡rmÃ-¡n's vortex trail, DN Series Liquid Vortex Flow Sensors are suitable for flow ranges from 0.24-39.6 gpm and offer accuracy to 1% FS of measured value. Versions with 1,000 W RTD temperature sensor built-in to bluff are available, providing direct temperature measurement in medium to facilitate documentation of energy transfer in water and water glycol...
Read More »Turbine Flow Sensors target low flow applications.
Utilizing IR technology to monitor and control fluids, including corrosive or aggressive liquids, PFA TeflonÃ-® Turbine Flow Sensors are designed for full-scale flow ranges of 2.0, 20, and 40 Lpm with accuracy of 1% of reading and repeatability of better than 0.15%. Featuring lightweight rotor that generates IR reflected digital output signal, sensors can be supplied with internal preset flow...
Read More »Ultrasonic Flow Transmitters measure flow in clean liquids.
Designed for flows to 4,000 gpm in 4-10 in. pipe, Series CSLFC features no moving parts, no pressure drop, and accuracy of Ã-
Read More »Magnetic Drive Gear Pump fits in tight spaces.
Featuring ability to handle fluids up to maximum temperature of 203Ã-
Read More »Diaphragm Pumps are available in single or dual head designs.
Designed for pressure or vacuum applications with low current requirements, Boxer 5100 and 5200 are intended for use with compatible liquids and gases, chemical dosing, sampling gases or liquids, or other applications in environmental, medical, or chemical processing. Dual head pumps can be configured for serial or parallel operation with combined flow to 10 Lpm (gas) or to 900 mLpm liquids....
Read More »Water Meters are available with range of coupling options.
Suited for municipal and industrial applications, CLXCD single jet totalizing water meters are available in Ã-½ and Ã-¾ in. sizes, with or without Reed Switch output every 10 gal. They are offered in hot water and cold water versions for fluid temperatures to 194 and 122Ã-
Read More »Ultrasonic Flow Transmitters suit Green applications.
Featuring brass construction, CSLFB Ultrasonic Flow Transmitters offer full-scale flow ranges from 15-400 gpm in Ã-¾-3 in. pipe, with accuracy of Ã-
Read More »Water Meters suit municipal and industrial applications.
Constructed in conformance with AWWA standard C708-91 and ANSI/NSF 61, Series CLXCB multi-jet totalizing water meters are available in 1Ã-½ and 2 in. sizes, with or without reed switch output. Pulse output of 1 pulse per 10 gallons is available. Series CLXCB is suitable for range of municipal, private, and industrial water metering applications.
Read More »Energy Monitor suits solar, submetering, energy transfer systems.
To aid in accounting for energy usage as well as allocation of costs to end users, Model DN-EM BTU/Energy Monitor measures thermal energy flow rate and totalized energy consumption in water and water/glycol based heating and cooling applications. System employs pulse generating Clark vortex flow transmitter, RTD sensors, Modbus 485 communications, and non-volatile memory. Generated scaled pulse...
Read More »Vortex Flow Transmitters offer flow ranges from 0.3-22 gpm.
Utilizing KÃ-¡rmÃ-¡n Vortex Trail principle of operation, DN-420 Series is suited for liquid media flow monitoring and control in Ã-¼-Ã-¾ in. piping systems. Loop-powered units use piezoelectric sensors embedded in ETFE vane located downstream of bluff to detect generated vortices. Frequency measured represents flow velocity, and flow factor is provided to convert frequency to...
Read More »Flow Sensors target solar and geothermal systems.
Operating on principle of KÃ-¡rmÃ-¡n's vortex trail, DN Series Liquid Vortex Flow Sensors are suitable for flow ranges from 0.24-39.6 gpm and offer accuracy to 1% FS of measured value. Versions with 1,000 W RTD temperature sensor built-in to bluff are available, providing direct temperature measurement in medium to facilitate documentation of energy transfer in water and water glycol...
Read More »Turbine Flow Sensors target low flow applications.
Utilizing IR technology to monitor and control fluids, including corrosive or aggressive liquids, PFA TeflonÃ-® Turbine Flow Sensors are designed for full-scale flow ranges of 2.0, 20, and 40 Lpm with accuracy of 1% of reading and repeatability of better than 0.15%. Featuring lightweight rotor that generates IR reflected digital output signal, sensors can be supplied with internal preset flow...
Read More »Ultrasonic Flow Transmitters measure flow in clean liquids.
Designed for flows to 4,000 gpm in 4-10 in. pipe, Series CSLFC features no moving parts, no pressure drop, and accuracy of Ã-
Read More »Magnetic Drive Gear Pump fits in tight spaces.
Featuring ability to handle fluids up to maximum temperature of 203Ã-
Read More »Water Meters are available with range of coupling options.
Suited for municipal and industrial applications, CLXCD single jet totalizing water meters are available in Ã-½ and Ã-¾ in. sizes, with or without Reed Switch output every 10 gal. They are offered in hot water and cold water versions for fluid temperatures to 194 and 122Ã-
Read More »Diaphragm Pumps are available in single or dual head designs.
Designed for pressure or vacuum applications with low current requirements, Boxer 5100 and 5200 are intended for use with compatible liquids and gases, chemical dosing, sampling gases or liquids, or other applications in environmental, medical, or chemical processing. Dual head pumps can be configured for serial or parallel operation with combined flow to 10 Lpm (gas) or to 900 mLpm liquids....
Read More »Ultrasonic Flow Transmitters suit Green applications.
Featuring brass construction, CSLFB Ultrasonic Flow Transmitters offer full-scale flow ranges from 15-400 gpm in Ã-¾-3 in. pipe, with accuracy of Ã-
Read More »Water Meters suit municipal and industrial applications.
Constructed in conformance with AWWA standard C708-91 and ANSI/NSF 61, Series CLXCB multi-jet totalizing water meters are available in 1Ã-½ and 2 in. sizes, with or without reed switch output. Pulse output of 1 pulse per 10 gallons is available. Series CLXCB is suitable for range of municipal, private, and industrial water metering applications.
Read More »