Clark Solutions
Hudson, MA 01749
Bench Top Peristaltic Pump suits scientific applications.
WindowsÃ-®-compatible, microprocessor-controlled Model Ã-µPC 3000 is rated for continuous operation and allows users to set dose, time, and speed variables, as well as calibrate for fluid viscosity. Alpha-numeric display indicates values of all adjustable parameters, and manual control can be overridden by analog signals or available PC control software via RS232 connection. Designed for...
Read More »
Flow Meter/Switch is viscosity compensated.
Model DS08 measures flow of lubricating oils, hydraulic fluids, transformer oils, and other fluids with viscosities up to 600 cSt. Rated for flow rates of 30 to 90 Lpm, it works according to modified variable area principle, where float is guided in cylindrical measuring tube by spring. Externally mounted indicator, magnetically coupled to float, indicates flow rate on scale. Reed contact closes...
Read More »
Variable Area Flow Meter also works as flow switch.
Model DS01 Flow Meter/Switch is rated for 60 mL to 150 L/min water or 2 to 625 L/min air. When placed inside cylindrical measuring glass, spring loaded float mechanism is moved by flowing media. Relative rate of flow is indicated by etched marking on glass. Reed switch mounted outside meter in sealed housing closes when magnet on float reaches position of reed contact. DS01 is suitable for...
Read More »
Flow Meter Switch has bistable switch functionality.
Model DS01 Flow Meter/Switch utilizes variable area principle to operate through use of spring-loaded, magnetic float mechanism. Used for measuring and monitoring low viscosity liquid and gas flow, it is rated for ranges from 60 mLpm to 150 Lpm for water and 2 to 625 Lpm for air. Relative rate of flow is indicated by etched marking on site glass and through use of reed contact mounted in sealed...
Read More »
Flow Meters monitor lubrication systems.
Model DV01 Gear-Wheel Flow Meters are designed for viscous fluids from 20 to 4000 cSt flowing at rates up to 65 l/min, and at pressures up to 160 bar. Three configurations are available: DV01-1 measures flow rates from 0.25 to 10 l/min and has 3/8 NPT connections; DV01-2 measures from 0.16 to 16 l/min and has 3/8 NPT connections; and DV01-3 measures flow rates from 1 to 65 l/min and includes 3/4...
Read More »
Flow Meter suits low flow rate applications.
Model DM01D Magnetic Inductive Flow Transmitter is designed for applications of 100 ml/min to 200 l/min. Meter measures change in voltage that occurs in electrically conductive fluid as it passes through magnetic field, thus eliminating moving parts and maintenance. Unit has stainless steel and Delrin wetted parts, and comes in 5 flow ranges. It operate in pressures up to 6 bar and handles media...
Read More »
Flow Meters and Indicator have analog output.
Variable area DS15 devices include flow meter with measuring scales for water, nitrogen, HCl, NaOH, and special scales; flow indicator with alarm outputs, float with integrated magnet, or analog output transducer; and flow meter with integrated Hall sensor and analog output. All incorporate float which is moved along tapered tube by flowing media. Flow rates are indicated by position of float in...
Read More »
Data Logging System offers 16-bit A/D converter.
5990 Series employs programmable ALMEMO connection plugs to allow sensors and displays/logs to connect with programmable zero-adjust, scaling factor, and engineering units. Available sensors include temperature, humidity, pressure, pH, gas concentration, and air velocity. Up to 999 sensors may be connected, and on-board memory can store up to 400,000 measured values. Data logger may be activated...
Read More »
Water Meters suit hot and cold sub-metering applications.
WFK Series 3/4 in. water meters have maximum operating pressure of 240 psi, maximum operating flow rate of 25 gpm, and are suitable for water temperatures to 194 deg F. All have pulse output via magnet-activated reed switch. Single jet type meters offer +/-1.5 % accuracy, and reading resolution of 0.1 gal. Meter registers rotate 360 deg for ease of mounting and display.
Read More »
Chemical Pump suits small-scale applications.
Series AM Magnetic Drive Chemical Pump is suitable for pumping applications requiring flow rates to 55 gpm and pressures to 22 psi. Pump has centrifugal, horizontal axis, close-coupled design, reinforced, thermoplastic-polymer body, and internal components composed of ceramic oxide, HD carbon, and fluorinated elastomer. Applications vary from handling clean water to slightly abrasive liquids to...
Read More »