Clark Solutions
Hudson, MA 01749
Minature Piston Pump measures 44 x 17.3 x 25.5 mm..
Model ESX 04 Solenoid Operated Miniature Piston Pump has stainless steel and EPDM wetted parts, maximum flow rate of 83 ml/min, and maximum pressure of 5.8 PSI. Pumps are self priming to 1 ft, and are tolerant of particulates in media up to 100 microns in size. Rated for continuous operation at 68Ã-
Read More »
Isolation Valves are ideal for low flow applications.
Model Series STV-K molded PEEK, solenoid operated, 2- and 3-way valves feature seat seal constructed of Perfluorelastomer providing chemical and abrasion resistance. Valves have 1.2mm internal orifice with 1/4-28 or M6 threaded port connections. They are rated for 12 or 24 Vdc continuous duty. Applications include automated chemistry, sample/reagent handling, solvent flush or rinse cycles, and...
Read More »
Magnetic Drive Pump has inert flow path and long life.
Model NH-PX brushless dc pump series has all inert pump housing and impeller, ceramic shaft and bearings, and wetted materials of glass filled polypropylene, PVDF, or ETFE. Pump offers life expectancy in excess of 10,000 maintenance-free hours. Maximum free flow is 30 lpm and maximum head pressure is 16 ft of water. Applications include plating tanks, temperature recirculators, ultrapure water...
Read More »Transfer Pump is ideal for drum pumping.
Toppa Series pneumatically powered diaphragm pump can deliver maximum head pressure of 75 PSI, and maximum flow rate of 3.2 GPM at required air supply of 70 psi. Injection molded pump can be used for detergents, water treatment chemicals, plating solutions, or mildly aggressive chemicals. Wetted materials feature polypropylene body and connections mated with TeflonÃ-® diaphragm.
Read More »
Diaphragm Pump is pneumatically powered.
Toppa Series lightweight, injection molded drum/transfer pump is suitable for detergents, water treatment chemicals, plating solutions, or mildly aggressive chemicals. Wetted materials include polypropylene pump body and connections mated with TeflonÃ-® diaphragm. At its required 70 psi air supply, Toppa can deliver maximum head pressures of 5 bar (75 PSI), and maximum flow rates of 12 IPM...
Read More »
Pinch Valves offer positive tube retention.
Available in either 2-way normally open or normally closed configurations with 12 or 24 VDC coils, Series EPK large-bore, solenoid-operated pinch valves are designed for use with 10 and 15 mm silicone tubing. Pressure ratings are .5 Bar (10mm ID) and .2 Bar (15mm ID). They are suitable for on/off fluid control applications or where replacement of wetted materials is advantageous. They feature...
Read More »
Panel-Mount Isolation Valves measure 42.7 x 25 mm.
Two or three-way STV-K-1 Molded PEEK Solenoid Operated Isolation Valves feature abrasion-resistant valve seats, 20 mm diameter solenoid coils, and PTFE isolation diaphragms. Perfluor elastomer valve seats provide chemical resistance. STV-K-1 valves are tolerant to particulate in flow streams. Rated for continuous duty, valves operate on 12 or 24 Vdc power, and are available with 1.8 mm orifice...
Read More »
Isolation Valves suit tight-fit applications.
Model KV-2 inert, manifold-mount, solenoid-operated, two-way, normally closed isolation valves measure 6 mm in width. They have internal volumes of 10 microL at inlet and outlet and virtually zero dead volume. KV-2 valves feature all inert, internal wetted parts that are diaphragm isolated from coil assembly and other metallic parts. They are suitable for low volume fluidic systems.
Read More »
Diaphragm Pump primes itself to 23 ft wc.
Air-operated Tapflo Aluminum Series double diaphragm pumps are suited for wide range of media, including paint and coatings, waste plant chemical dosing and many other pH-neutral liquid pumping applications. Pumps are available in 5 sizes covering flow capacities up to 110 gpm with infinitely variable flow control and dry run capability. Pumps handle wide range of fluid viscosities as well as...
Read More »