Weidmuller USA, Inc.
Richmond, VA 23236
Interface Device is IP67 rated.
Offered in epoxy sealed PBT housing with flammability rating of UL 94 V0, JACKPACÃ-® is designed to address signal conditioning in industrial environments. Device uses M12 connector to integrate in sensor actuator cabling, and helps introduce interface device into circuit without need for enclosure/control panel. Product is available in configurations like form C relay output, pulse...
Read More »
Industrial Routers safeguard Ethernet networks.
Comprised of 2 industrial access routers and 2 mini routers, series connects industrial Ethernet networks safely and securely to Internet via integrated analog or ISDN modem. External modems connect to RS232 interface, and access to networks behind routers is granted to authorized users only, making it possible to conceal connected networks/machines behind one IP address. All routers feature...
Read More »
Sensor Actuator Interfaces have IP 67 rated housings.
Using same plug-and-play ports for either sensors or actuators, Active Sensor Actuator Interfaces provide wiring flexibility for modular and decentralized process control in automation applications. They support Profibus, DeviceNet and CANopen, as well as Ethernet, Ethernet/IP, PROFINET, and Modbus/TCP network protocols. Available with M8 and M12 socket connections, modules have LEDs at each...
Read More »
Terminal Blocks accept 4 plug-in connectors.
Included in WeiCoS (Weidmuller Connection System) terminal block series, ZT4/2AN/1 and ZTPE4/2AN/1 are 4 mmÃ-² models that carry 600 V/32 A electrical rating and handle up to 10 AWG conductors. They combine terminal block and plug-in connection technology, resulting in modular, functionally flexible, and manufacturer-independent wiring system. Externally-tensioned contact and locking element...
Read More »
Disconnect Terminal helps minimize maintenance time.
Accepting pluggable jumpers, WTR 2.5 Disconnect Terminal enables user to plug multiple poles in place with press to back of insulation sleeve. Disconnection can be made using supplied lever or optional pull-pin. Component plug holder converts WTR into component holder where diodes and resistors can be soldered in place. Integrated test sockets allow for 2.3 mm banana plugs to be used for...
Read More »
Terminal Blocks suit standard wire termination applications.
Ring-lug terminal blocks offer hinged shroud for safe wiring, and finger-safe design to eliminate need for standard/customized dust cover. Used together, WTL 6/4 FF (slide link terminal) and WTD 6/4 FF (standard feed-through) terminal can be configured to create multiple phase testing configurations for current transformer applications. Disconnect test terminals feature combi foot design for...
Read More »Industrial Ethernet Switches use only 45 mm of DIN-rail space.
Featuring rugged aluminum enclosure and operating temperature of -40 to +75Ã-ºC, copper/fiber Industrial Managed Ethernet Switches are offerd with 8, 16, and 24 ports and generate statistics such as data rate, throughput, and number of error frames received. RapidRing Redundancy feature identifies break in Ethernet ring and re-establishes traffic in less than 300 msec. Switches support SNMP...
Read More »Terminal Block provides 2 connection technologies.
Measuring .20 x 3.75 x 2.08 in., hybrid, dual-level Model IDK 1.5N/ZB offers both insulation displacement connection and screw clamp connection. Externally tensioned IDC termination technology and yellow wire guide offer visual indication of correctly terminated conductor. With wire range of 24-16 AWG for IDC termination, and 26-12 AWG for screw clamp termination, unit is suited for industrial...
Read More »Fuse Terminal offers protection in small package.
Able to be mounted on TS-32 and TS-35 DIN-rails, 2.13 in. high WSI 4/2 fuse terminal implements short-circuit and overload protection in electrical cabinets to protect power supplies or additional critical loads in process and industrial applications. It features 4 mmÃ-² screw clamping system and accepts 1Ã-¼ x Ã-¼ in. US fuse. UL rated for 300 V, 15 A, and 30-10 AWG, terminals can be...
Read More »Media Converters are rated for IP20 environments.
Requiring 40 mm of DIN-rail space and consuming 4 W, Media Converters enable users to convert electrical Ethernet signals into optical Ethernet signals and vice-versa. They are real-time capable and remain transparent in network, with no effect on network management or redundancy. Supporting full or half duplex operation, units convert electrical signals from RJ45 ports to multimode optical ports...
Read More »