ABB

305 Gregson Dr.
Cary, NC 27511

Current Transducer offers closed loop control.

DCSA Series loop powered, linear output current transformer provides output directly proportional to RMS AC current passing through external LCSC10T12 toroidal sensor. It provides either analog current or voltage: 4 to 20 mA, 1 to 5 Vdc, or 2 to 10 Vdc. Each unit is factory calibrated for monitoring (with LCSC10T12) 0 to 5, 0 to 10, 0 to 20, or 0 to 50 A. Transducer senses current draw on...

Controls & Controllers

I/O Terminal Block connects to DeviceNet bus system.

Brick-style RIO remote terminal block includes base module and plug-in, DeviceNet, electronic module. Terminal strips on base module accommodate 2- and 3-wire field devices, such as sensors and actuators. Additional I/O may be added with analog and digital expansion module terminal blocks. Base module can be snapped onto DIN rail or panel mounted. Module is available with either screw-clamp or...

Sensors, Monitors & Transducers

Current Sensor is self-powered.

TCS Series Go/No Go Sensor/PLC interface can be directly connected to PLC's digital input module or to load rated up to 1 A. It can detect overcurrent or undercurrent events, and signal PLC or switch load device to ON or OFF. Onboard toroidal sensor monitors current flow through ac loads up to 50 A steady, 300 A inrush. TCS Sensor is available with adjustable or factory-fixed actuation point.

Timers & Clocks

Timer/Counter has 12 programmable functions.

ProgramaCube NHPU Series high power solid state timer/counter module has switch adjustable time delays of 0.1 sec to 1,023 hr in six ranges. Switch adjustment allows accurate selection of time delay or number of counts. Microcontroller timing circuit provides repeat accuracy of 0.1%. Module is available with 6, 10, or 20A high current solid state output. It can switch motors, lamps and heaters...

Controls & Controllers

Modular Remote I/O's are rated Class I, Div 2.

systronÃ-® PM remote I/O modules include bus modules, digital and analog I/O modules, RS-232/RS-485 serial interfaces, central processing units (CPUs), and special purpose I/O modules. Rail mounted units measure only 22.5 or 45 mm wide. systron modules can be used to create micro PLCs. All remote I/Os are CE marked, UL listed, and CSA certified. Built-in ribbon cable simplifies interfacing...

Analog Converters are approved for hazardous locations.

Din rail mounted C.A.I.S. UNI multifunction analog converters convert voltage, current, resistance temperature devices (RTDs), and thermocouple signals to standard process levels. They offer plug-in wiring and short-circuit proof outputs. C.A.I.S.-E family includes four multifunction analog signal converters plus single function models to perform specific analog signal conversion. All have 3-way...