The Lincoln Electric Company

Spool Gun targets aluminum welding applications.
Communication Systems & Equipment

Spool Gun targets aluminum welding applications.

Designed for Power MIG(TM) 255C and Power MIG 350MP wire feeder/welder systems, Magnum® 250LX is capable of feeding .030 to 3/64 in. dia aluminum wire or .025-.035 in. dia steel wire on up to 4 in. dia spools at speeds up to 800 ipm. It features 3½ turn wire speed control at gun for fine adjustment of wire speed, eliminating need to walk back to power source to change speed. Rated 280 A/60%...

Read More »
Welding Equipment & Supplies

Flux-Cored Wires are used for mild steel welding.

Offered in 6 types, UltraCore gas-shielded, flux-cored wires deliver smooth and stable arc performance. ProTech foil bag packaging minimizes moisture and increases resistance to cracking and gas tracking. General-purpose UltraCore 71A75 Dual is used with straight CO2 or mixed gases, UltraCore 712A80 (E71T-12) offers impact resistance, and UltraCore 71A85 (E71T-1) works with high argon mixed...

Read More »
Agricultural & Farming Products

Welder/Generator offers 5,500 W AC generator power.

Featuring Robin/Subaru® 9 hp EX 27 engine, Weldanpower® 125 provides DC stick welding power with 125 DC Amps for variety of projects and 5,500 surge watts of AC generator power for work lights, tools, and pumps. Unit is capable of welding steel, stainless steel, cast iron, or hardfacing projects. Tubular roll cage provides added protection and many lift handle points. Two people can...

Read More »
Communication Systems & Equipment

Welding System uses digital communication protocol.

Multi-process Power Wave® 355M power source, with Power Feed(TM) 10M wire feeder, features push-pull aluminum MIG capabilities. It is also capable of Stick, TIG, MIG, Synergic MIG, Pulsed, and Flux-Cored welding as well as arc gouging. Unit features ArcLink® open digital communications protocol and is rated 350 A, 34 V @ 60% duty cycle. Full amperage range is 5-425 A. Unit comes factory...

Read More »
Welding Equipment & Supplies

Welding Wires have lubricating surface treatment.

SuperArc copper-coated wire and SuperGlide MIG bare wire feature MicroGuard Ultra(TM) lubricating surface treatment, which reduces spatter and creates stable arc. Treatment improves feeding by reducing friction and guards against worn contact tips and liners, plugged drive roll grooves, and kinked wire guides. It also eliminates wavy appearance that can occur as wire bumps or lurches through gun...

Read More »
Welding System suits push-pull aluminum welding.
Welding Equipment & Supplies

Welding System suits push-pull aluminum welding.

Ready-Pak(TM) K2145-2 package includes Invertec(TM) V350-PRO Advanced Process Model with pulsed MIG welding capability, Cobramatic® wire-feeder cabinet, Python® push-pull gun, regulator and hose, 16 lb wire spool, and required cables. With 350 A @ 60% duty cycle, inverter-based welding system welds thin sheet metal material as well as heavy aluminum and stainless or steel plate projects. It...

Read More »
Welding Generator has fuel tank that lasts all day.
Agricultural & Farming Products

Welding Generator has fuel tank that lasts all day.

Stick, TIG, wire, and pipe-welding Ranger(TM) 305D has enclosed case, Chopper Technology(TM), and 12 gal fuel tank. Powered by 3-cylinder Kubota® D722 diesel engine, it delivers 9,500 continuous W of 120/240 Vac generator power. Multi-process 300 A dc diesel-engine drive welder offers arc-control adjustment, plus fuel pump with air-bleed system that eliminates manual air bleeding if tank is...

Read More »
Wire Welder OHV Engine
Welding Equipment & Supplies

Wire Welder OHV Engine

Ranger® 8 is offered with 20.5 hp, twin-cylinder, air-cooled Onan® Performer® gasoline engine that runs at 3,600 rpm. Automatic engine shutdown protects against low oil pressure and prevents engine damage, while automatic engine idler offers fuel economy and noise control. Ranger 8 Onan OHV suits Stick, DC and AC TIG, and general purpose CV wire feed welding. Unit offers 8,000 W...

Read More »
Wire Feeder is both rugged and portable.
Communication Systems & Equipment

Wire Feeder is both rugged and portable.

LN-15, with impact- and abrasion-resistant, ABS plastic case, is surrounded by full metal roll cage, made from aluminum alloy tubing. Across the Arc model has built-in contactor. Control Cable model is capable of Surface Tension Transfer® welding. LN-15 is designed for MIG and flux-cored processes using .023 to 1/16 in. solid wire or .035 to 5/54 in. flux-cored wire, at feed speeds of 50-700...

Read More »
Arc Welder is driven by gasoline engine.
Welding Equipment & Supplies

Arc Welder is driven by gasoline engine.

Pipeliner 200G provides 200 A dc at 60 percent duty cycle. It has 5 current ranges with overlap in each range for stick-pipe welding and arc welding processes where slope control is desired. It uses General Motors 3.0 liter, 4-cylinder, water-cooled, industrial gasoline engine with 46 hp at 1,600 rpm. Dc exciter supplies pure dc current to welding generator, and 100 RPM high-idle adjustment...

Read More »

All Topics