Nippon Pulse America, Inc.
Radford, VA 24141
Linear Shaft Motor meets needs of high-precision applications.
With 4 mm dia shaft and stroke lengths to 40 mm, model S040 suits small-scale applications. It provides up to 0.98 N continuous force, 0.6 Arms continuous current, 3.8 N acceleration force, and 2.2 Arms acceleration current. Regardless of winding size, servomotor has width of 10 mm and forcer length of up to 79 mm. Designed for minimal heat generation, product uses all magnetic flux and has no...
Read More »
Brushless Stepper Motor suits high torque applications.
Featuring 2-phase, tin-can style design, Model PF55 is available with both unipolar and bipolar windings. With unipolar winding, unit offers holding torque of 120 N, while bipolar winding provides 150 N of holding torque. In full-step excitation mode, motor has 48 steps/rev, rated voltage of 5 and 12 V, inductance from 12-37 mH, and 5-36 W resistance. Gearhead version, available with 20 ratio...
Read More »
Linear Shaft Motor Stage offers nanoprecision.
Integrating slide guide, encoder, and coreless direct drive linear shaft motor, single-axis Model SCR100 provides 100 lb load capacity, 50-300 mm stroke, and bi-directional repeatability of -
Read More »
Unipolar Voltage Driver supports high-speed motor applications.
Supplied in EMP16 package, NP2671E2 allows for 60 V max motor output so that user cannot exceed phase output margin of motor. Constant voltage driver, intended for stepper motors with unipolar windings, provides 2-channel x 500 mA continuous output current and features pulse input (Pulse/Dir) system that lets user switch between half and full step modes. Additional features include 0.35 A/phase...
Read More »
Pulse Generator Chip drives stepper and servo motors.
Providing 18 operating modes, Model PCL6045BL controls up to 4 axes as well as linear interpolation of 2-4 axes and circular interpolation between any 2 axes. Chip also offers operation correction, backlash correction, programmed soft limit, and ability to override pulse rate during operation. With max output of 6.5 Mpps and 19.6608 MHz standard reference clock, chip is suited for...
Read More »Stepper Motor offers high torque in a thin stack package.
Featuring 48 steps/revolution and unipolar winding, Model PFC35TH measures 15 mm at its widest point and offers max holding torque of 33 mNm. Unit features rated voltage of 9 V, starting pulse rate of 400 pps, slewing pulse rate of 470 pps, and 37 W resistance. With total height of 27 mm, tin-can rotary motor is suited for printing, packaging, and medical devices.
Read More »
Linear Servomotor features 50 mm long forcer.
Model L250SS Linear Shaft Motor has non-critical air gap up to 5 mm, which allows for flexible machining and installation. This also allows flexibility over length of stroke and is beneficial in applications that may cause build-up on shaft. Stroke lengths of 100-3,750 mm are available and unit is offered with continuous forces of up to 24 N and peak force of up to 94 N. Able to achieve...
Read More »
Linear Shaft Motor achieves sub micron resolution.
Designed for ultra high-precision market, Linear Shaft Motor features ironless construction and cylindrical design that uses 100% of magnetic flux. All available magnetic flux cuts coils at 90-
Read More »
Linear Stepper Motor simplifies linear motion system design.
Model PFL35T LINEARSTEP-® tin-can type linear actuator offers direct linear motion without need for any mechanical transformers. Product has 35 mm OD and is available with 0.48, 0.96, and 1.2 mm lead screw pitches. In addition to neodymium magnets, features offered include bipolar and unipolar windings, up to 39.5 N force rating, rated voltages of 5 and 12 V, and 48 steps per revolution. Design,...
Read More »
Single-Axis Linear Stage targets space-constrained applications.
SLP Acculine series incorporates linear shaft motor into all-inclusive stage to facilitate transition from traditional linear motion systems, including ball-screws, belt and chain drives, and pneumatic actuators. Intended for applications with limited space low-profile product integrates shaft support within housing and is engineered to have minimized dead zone. Offering sub micron resolution,...
Read More »