Nippon Pulse America, Inc.
Radford, VA 24141
Scaleless Linear Motor features built-in encoder.
Offering up to 5 -µm resolution and repeat accuracy for positioning applications, SL083- integrates non-analog magnetic linear encoder and has 2-part design –- tubular stainless steel shaft and non-contact forcer – that simplifies installation and configuration. Solution also has built-in interpolator and Hall sensors and offers real-time single processing and high dynamics without any...
Read More »
RoHS-Compliant Motion Controller Chips have 4-wire SPI interface.
Comprising single-axis PCL6114 and 4-axis PCL6144 servo/stepper controller chips, PCL61x4 Series features SPI serial bus for 4-wire connection to augment existing 8-/16-bit parallel bus. Programmable software limits and 27 event factors are provided to initiate interrupt signal output. Along with built-in pre-registers for continuous operation, features include linear interpolation, 9 major...
Read More »Bipolar Stepper Motors come in 10 mm and 20 mm diameters.
Rated at 2.7 V, Model PFC10 features 1.0 mN-m holding torque, starting pulse rate of 960 pps, and 20 Ω resistance,- while- Model PFC20, rated at 8.9 V, provides 10 mN-m holding torque, starting pulse rate of 370 pps, and 100 Ω resistance. Both 2-phase, permanent magnet motors deliver 20 steps/revolution with step angle of 18-
Read More »
Stainless Steel Linear Actuator suits food-grade applications.
Available in models with 16 or 25 mm shaft diameter and various coil windings, IP69K-rated Hygienic Green Drive has FDA food grade certified guides and built-in feedback electronics. Motion control product, suited for harsh and washdown environments, offers rated forces from 8.4-96.1 N, acceleration (peak) forces from 33.7-384.5 N for 40 sec, and currents from 0.53-1.85 A. It supports integration...
Read More »Linear Shaft Motor to Replace Traditional Linear Systems
Nippon Pulse's Linear Shaft Motor is an ideal replacement for more traditional linear motion systems including ball-screws, belt drives, piezo motors, u-channel motors, and rack and pinion linear actuators. The Linear Shaft Motor provides greater energy efficiency, precision, accuracy, repeatability, and cost efficiency than similar linear systems. A direct thrust motor, the Linear Shaft Motor...
Read More »
Linear Servo Shaft Motor delivers up to 3,100 N of force.
Able to achieve sub-micron resolution, S605 Linear Shaft Motor is available with double, triple, or quadruple windings and has acceleration force range of 1,000-3,100 N and acceleration current from 34-35 A. Acceleration force and current can be maintained for up to 40 sec. Rated for 420-780 N continuous force and 8.4-8.8 A continuous current, motor has 60.5 mm dia shaft and is available with...
Read More »
Nippon Pulse Introduces Four Driver Boards
Nippon Pulse has introduced four new driver boards for use with 2-phase stepper motors. Now available are the AD1111, AD1131, AD1231, AD1431 to drive bipolar and unipolar stepper motors. All four drivers are ideal for integration into systems or for use during prototyping and evaluation phases. The AD1231 is a constant current driver board designed for 2-phase unipolar stepper motors. The board...
Read More »
Linear Direct Drive Actuator suits high-performance applications.
Green Drive comes in 2 sizes, G16x and G25x series, with respective 16 and 25 mm dia shaft (magnets). Acceleration force is rated up to 600 N for 40 sec, and effective stroke lengths range from 10-1,540 mm. Cooling systems can increase rated force up to 20%, and products feature nominal rated force from 13-150 N and position repeatability of -
Read More »
Motion Control Board registers up to 32 operation profiles.
Used for 2-phase bipolar stepper motors, FMC32 is comprised of controller with integrated NP3775E3 driver and LSI PCD2112 chip for controlling serial bus. Board can register up to 32 operation patterns (s-curve and linear) and up to 256 steps in execution sequence in internal memory and automatically processes patterns and sequences without external PC. Due to built-in CPU, users can repeat...
Read More »Bipolar Chopper Driver Board offers up to 1/16 microstepping.
Measuring 43.34 x 43.43 x 18.4 mm, Model NPAD10BF offers up to 1/16 microstepping on 2-phase tin-can, linear, and hybrid stepper motors. Unit accepts lead wires and can also be mounted directly to back of NEMA 17 hybrid motors using 2 pre-machined mounting holes. Operating on input voltage of 12-30 Vdc, board features peak output current of 1.2 A/phase, isolated input signals, on-board switching...
Read More »