Juki Automation Systems
Morrisville, NC 27560
Share:
Juki Offers 3600 7 Reel Storage Capacity
MORRISVILLE, NC - Juki Automation Systems (JAS), Inc., a world-leading provider of automated assembly products and systems and part of Juki Automation Systems Corporation, is pleased to announce that its ISM UltraFlex 3600 Intelligent Storage System provides automatic kitting for the next run on placement machines.- Providing the ultimate flexibility, the system communicates with the placement...
Read More »
LED Mounter handles long boards up to 1.5 m.
Supporting diverse LED nozzles, JX-350 LED Mounter- can simultaneously place up to 6 diffusing lenses over top of- LED- for backlighting applications. Flexible placement system offered by this solution is designed for LED lighting products and mid- to large-sized LCD backlights. Design supports ultra-long boards up to 1,500 mm and Juki laser centering- ensures high-speed, accurate placement....
Read More »
Juki to Run Three SMT Lines at the IPC APEX EXPO
High-Speed, High-Mix and LED / Odd-Form Lines Will be Displayed MORRISVILLE, NC — Juki Automation Systems (JAS), Inc., a world-leading provider of automated assembly products and systems and part of Juki Automation Systems Corporation, will exhibit in Booth #918 at the IPC APEX EXPO, scheduled to take place Feb. 24-26, 2015 at the San Diego Convention Center in California. Juki will display...
Read More »
Batch Selective Soldering System offers operational flexibility.
Able to be configured with- single nozzle or- 2 nozzles, CUBE.460 offers batch platform with flexibility for through-hole applications. Selective mini-wave soldering system supports exchangeable solder pot for dual alloys and comes with- various features: heated nitrogen at soldering nozzle; 0-
Read More »
Inspection System detects PWB failures at high speeds.
Utilizing automatic optical inspection and solder paste inspection functions, Model RV-1 inspects component mounting and solder printing to prevent defective PWBs from going to market. System uses Clear Vision Capturing System as illumination device, and is equipped with 270 mm dia high-brightness white LED 3-ring light and coaxial light.- Twin linear motor, high-speed data transmission of CMOS...
Read More »Solder Paste Printer includes motion screen mechanism.
Utilizing Motion Screen mechanism, Model RP-1 aligns PWB with screen mask. System drives 3 alignment modules attached to outer circumference of mask stage to adjust position in X, Y, and θ directions simultaneously. This allows repetitive printing accuracy of circumference fine adjustment to improve up to -
Read More »
Juki Kicks off the Celebration for Its 25,000th Shipment with a Booming APEX
MORRISVILLE, NC - Juki Automation Systems, Inc., a world-leading provider of automated assembly products and part of Juki Corporation, kicked off the celebration for its 25,000th machine shipped worldwide with a successful IPC APEX Expo. The three-day event boasted a whirlwind of booth traffic for the company as well as a great deal of interest in the new exclusive technology showcased in the...
Read More »JUKI and AEGIS Bridge Platforms
JUKI and AEGIS Software announce a unique integration of JUKI's new Intelligent Shop Floor Solutions software package (IS) with CircuitCAM Express for fast data preparation and facility-wide programming. JUKI's IS software package provides managers, supervisors and engineers with the tools required to run the most efficient production possible, and has been seamlessly integrated with AEGIS'...
Read More »Intelligent Feeder System features automatic traceability.
Suited for SMT manufacturers, IFS-X system uses RFID technology as primary communication method between feeder and assembly machine to track components from initial receipt through placement. Traceability is conducted by intelligent feeders, which store component data such as part number, quantity, and lot number. Date and time board was assembled are also traced. Through automated part...
Read More »
Selective Soldering Machines work with lead-free alloys.
Model 300L and 400L are suited for selective soldering of conventional (through-hole) components after reflow process. First machine can utilize pre-heater and includes bare board or mask grippers, internal spray or drop jet fluxers, and various soldering nozzles from 4-30 mm dia. Building on features of 300L, 400L offers 3-stage inline system for automated soldering process. It can also be...
Read More »
Juki Offers 3600 7 Reel Storage Capacity
MORRISVILLE, NC - Juki Automation Systems (JAS), Inc., a world-leading provider of automated assembly products and systems and part of Juki Automation Systems Corporation, is pleased to announce that its ISM UltraFlex 3600 Intelligent Storage System provides automatic kitting for the next run on placement machines.- Providing the ultimate flexibility, the system communicates with the placement...
Read More »
LED Mounter handles long boards up to 1.5 m.
Supporting diverse LED nozzles, JX-350 LED Mounter- can simultaneously place up to 6 diffusing lenses over top of- LED- for backlighting applications. Flexible placement system offered by this solution is designed for LED lighting products and mid- to large-sized LCD backlights. Design supports ultra-long boards up to 1,500 mm and Juki laser centering- ensures high-speed, accurate placement....
Read More »
Juki to Run Three SMT Lines at the IPC APEX EXPO
High-Speed, High-Mix and LED / Odd-Form Lines Will be Displayed MORRISVILLE, NC — Juki Automation Systems (JAS), Inc., a world-leading provider of automated assembly products and systems and part of Juki Automation Systems Corporation, will exhibit in Booth #918 at the IPC APEX EXPO, scheduled to take place Feb. 24-26, 2015 at the San Diego Convention Center in California. Juki will display...
Read More »
Batch Selective Soldering System offers operational flexibility.
Able to be configured with- single nozzle or- 2 nozzles, CUBE.460 offers batch platform with flexibility for through-hole applications. Selective mini-wave soldering system supports exchangeable solder pot for dual alloys and comes with- various features: heated nitrogen at soldering nozzle; 0-
Read More »
Inspection System detects PWB failures at high speeds.
Utilizing automatic optical inspection and solder paste inspection functions, Model RV-1 inspects component mounting and solder printing to prevent defective PWBs from going to market. System uses Clear Vision Capturing System as illumination device, and is equipped with 270 mm dia high-brightness white LED 3-ring light and coaxial light.- Twin linear motor, high-speed data transmission of CMOS...
Read More »Solder Paste Printer includes motion screen mechanism.
Utilizing Motion Screen mechanism, Model RP-1 aligns PWB with screen mask. System drives 3 alignment modules attached to outer circumference of mask stage to adjust position in X, Y, and θ directions simultaneously. This allows repetitive printing accuracy of circumference fine adjustment to improve up to -
Read More »Carlos Eijansantos Awarded JAS, Inc. Regional Sales Manager of the Year
MORRISVILLE, NC ⎯ Juki Automation Systems, a world-leading provider of automated assembly products and systems and part of Juki Corporation, awarded Carlos Eijansantos Regional Sales Manager of the Year 2013 at the recent awards banquet held during the Juki Americas National Sales meeting. The meeting took place October 23-25, 2013 at Juki’s facility in Morrisville, NC. Bob Black, President...
Read More »
Juki Kicks off the Celebration for Its 25,000th Shipment with a Booming APEX
MORRISVILLE, NC - Juki Automation Systems, Inc., a world-leading provider of automated assembly products and part of Juki Corporation, kicked off the celebration for its 25,000th machine shipped worldwide with a successful IPC APEX Expo. The three-day event boasted a whirlwind of booth traffic for the company as well as a great deal of interest in the new exclusive technology showcased in the...
Read More »JUKI and AEGIS Bridge Platforms
JUKI and AEGIS Software announce a unique integration of JUKI's new Intelligent Shop Floor Solutions software package (IS) with CircuitCAM Express for fast data preparation and facility-wide programming. JUKI's IS software package provides managers, supervisors and engineers with the tools required to run the most efficient production possible, and has been seamlessly integrated with AEGIS'...
Read More »Intelligent Feeder System features automatic traceability.
Suited for SMT manufacturers, IFS-X system uses RFID technology as primary communication method between feeder and assembly machine to track components from initial receipt through placement. Traceability is conducted by intelligent feeders, which store component data such as part number, quantity, and lot number. Date and time board was assembled are also traced. Through automated part...
Read More »