Festo Corp.
Islandia, NY 11749
Share:
New Filters with a Lockout/Tagout Feature for Operational Safety
MS6 filtration system are rated for air flow ranging from the MS4 at 360 l/min to MS9 at 7,800 l/min. Designed for food and packaging-in-food-zone applications in the dairy, baking, produce and processed foods. Installs simply and is compatible with a wide range of fittings from NPT 2 all the way down to G 1/8.
Read More »
EPCE Compact Electric Cylinder With 5 to 80 mm Working Stroke Range
Designed for machines and lab instrumentation equipment. Provides maximum dynamic response and minimal positioning times with toothed belt technology. Available with four piston rods per unit.
Read More »
New VOVK Valve Features Pressure Range of -.9 to 7 bar
Delivers a wide pressure range, including vacuum, fast switching time and low power consumption. Actuates multiple diaphragms on a LOC cartridge that contains the analysis process and reagents. Provides fast switching time of .6 milliseconds at 6 bar enable tight packing on a manifold.
Read More »
New MSE6-C2M and MSE6-D2M Modules Flow up to 5,000 L of Compressed Air per/min
C2M monitors flow rate and when production is not taking place, it shuts off after a defined idle time. Can be integrated into the machine network via PROFINET and also through the Festo CPX platform. D2M provides leakage detection and process data acquisition for condition monitoring.
Read More »
New VTSA-F-CB Valve Manifold Offers Serial Communication
Simplifies installation of PL-d CAT 3 safety systems through C-Bus plug-and-play functionality. Compatible with combinations of pilot air control valves, soft-start exhaust valves, proportional valves, and vacuum generators. Comes with integrated safety and EtherNet/IP connectivity.
Read More »
New VEMD Control Valve Comes with Piezo Technology
Features integrated control circuit with thermal sensor that ensures precision mass flow control and dynamic response. Designed to proportionally control air flow in portable oxygen devices, ventilators, bioreactors, and cell-culture fermenters. Gas flow can be adjusted and controlled linearly by entering a setpoint between 0 and 10 V.
Read More »
New N2 Purge System Comes with Two Pneumatic Connections
Features low-friction piezo-based technology that limits the size of abrasion, causing particles to about 0.1 μm. Closed-loop control ensures accurate, stable, and linear flow rate without hysteresis. Ideal for Front Opening Unified Pod (FOUP) applications by maintaining consistent and low-particle nitrogen supply.
Read More »
New Smartenance Application Software is Suitable for Managing and Documenting Maintenance Tasks
Offers mobile maintenance calendar as an app for smartphone and tablets on the shop floor and a desktop web-browser interface. Enables creation of maintenance tasks with an option for incorporating supporting images, PDFs, and videos. Provides team coordination through real-time information makes maintenance management more efficient.
Read More »
New Electric Drives Equipped with Digital I/O and IO-Link
Offers optimized motion characteristics including gentle cushioning, while advancing and retracting into the end positions and pressing and clamping functionality. Delivers intelligent IIoT communication. End position, cushioning path and manual operation are set on the drive.
Read More »
New CPX-AP-I Remote I/O System with Capacity up to 80 I/O modules
Compatible with communication protocols including EtherNet/IP, PROFINET and EtherCAT. Enables valve terminals to be moved closer to pneumatic cylinders. Has theoretical upper limit of 500 I/O modules and 164 distance between modules.
Read More »
New Filters with a Lockout/Tagout Feature for Operational Safety
MS6 filtration system are rated for air flow ranging from the MS4 at 360 l/min to MS9 at 7,800 l/min. Designed for food and packaging-in-food-zone applications in the dairy, baking, produce and processed foods. Installs simply and is compatible with a wide range of fittings from NPT 2 all the way down to G 1/8.
Read More »
EPCE Compact Electric Cylinder With 5 to 80 mm Working Stroke Range
Designed for machines and lab instrumentation equipment. Provides maximum dynamic response and minimal positioning times with toothed belt technology. Available with four piston rods per unit.
Read More »EandM Now Distributes Festo Automation Products Throughout The West Coast
EandM, a 65-year-old minority-owned company, is recognized for focusing on industry-leading technology and tech support. Islandia, NY, February 2, 2021 — Festo announced today that EandM, with corporate headquarters in Healdsburg, California, is now selling and supporting the full line of Festo pneumatic and electric automation components and systems in Washington State, Oregon, California, and...
Read More »
New VOVK Valve Features Pressure Range of -.9 to 7 bar
Delivers a wide pressure range, including vacuum, fast switching time and low power consumption. Actuates multiple diaphragms on a LOC cartridge that contains the analysis process and reagents. Provides fast switching time of .6 milliseconds at 6 bar enable tight packing on a manifold.
Read More »
New MSE6-C2M and MSE6-D2M Modules Flow up to 5,000 L of Compressed Air per/min
C2M monitors flow rate and when production is not taking place, it shuts off after a defined idle time. Can be integrated into the machine network via PROFINET and also through the Festo CPX platform. D2M provides leakage detection and process data acquisition for condition monitoring.
Read More »
New VTSA-F-CB Valve Manifold Offers Serial Communication
Simplifies installation of PL-d CAT 3 safety systems through C-Bus plug-and-play functionality. Compatible with combinations of pilot air control valves, soft-start exhaust valves, proportional valves, and vacuum generators. Comes with integrated safety and EtherNet/IP connectivity.
Read More »
New VEMD Control Valve Comes with Piezo Technology
Features integrated control circuit with thermal sensor that ensures precision mass flow control and dynamic response. Designed to proportionally control air flow in portable oxygen devices, ventilators, bioreactors, and cell-culture fermenters. Gas flow can be adjusted and controlled linearly by entering a setpoint between 0 and 10 V.
Read More »Festo App Aids Operation of New Emergency Equipment for COVID-19 Care in Field Hospitals
Festo and Fraunhofer win one of the three top prizes in the Give a Breath Challenge for developing the app. Islandia, NY, August 11, 2020 — Festo and Fraunhofer IPA were awarded one of the three top category honors recently in Munich during the Give a Breath Challenge award ceremony. The two companies developed the Virus Fighters Handbook, an information delivery app for field hospitals, where...
Read More »
New N2 Purge System Comes with Two Pneumatic Connections
Features low-friction piezo-based technology that limits the size of abrasion, causing particles to about 0.1 μm. Closed-loop control ensures accurate, stable, and linear flow rate without hysteresis. Ideal for Front Opening Unified Pod (FOUP) applications by maintaining consistent and low-particle nitrogen supply.
Read More »Mini Factories in Containers Help Reduce Mask Shortages
Decentralized systems from Mikron ensure supply in times of a pandemic. Festo is a key development partner. Islandia, NY, June 16, 2020 — Disposable protective nasal-and-mouth masks are in short supply, but a manufacturing system from Swiss company Mikron could put masks within everyone’s reach. This scalable system produces 50-100 face masks per minute, depending on the version. With...
Read More »